Dell Optiplex 760- Intel 4 Graphics Issue

I have an Optiplex 760 small form that I recently had to reinstall Windows 7 due to a hard drive issue, I am running Windows 7 Enterprise 32bit, I have 2 Gigs of Ram and a 3.00 Core2Duo processor. After the reinstall of Windows I am not able to set the proper resolution of my Dell 1909wf (widescreen monitor) the proper resolution of 1440x900, I am not able to select it. I have my monitor connected though VGA as that is the only connection on my computer. When I go in to Device Manager, I have a little warning triangle next to Intel (R) 4 Series Internal Chipset. When I click on properties of the Intel 4 chipset, the error is:



This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system.


I have downloaded the drivers for the graphics card and for the chipset directly from Dell by entering the service tag and have rebooted my computer several times with no success. I have even had Windows search for the latest update and It says I have the latest driver installed. I also have a warning triangle on Intel (R) Management Engine Interface. Keep in mind that my computers graphics card worked great and had the proper drivers on 7 before the hard drive was re-imaged. I have other 760s with the same specs and monitors that have no issues. I can post more screen shots if needed.




Thanks!

Welcome to Seven Forums.
Go into device manager and see if your monitor is listed.
If it is listed as pnp. I would suggest going to Dell to see if their is a.inf file (driver) for it and install it.

Installing the .inf file should get your monitor recognized and this will allow it to run it's native resolution.
Fabe