Overclocking Ati Radeon 5670

Page 1 of 2 12 LastLast

  1. Posts : 101
    windows 7 ultimate x32
       #1

    Overclocking Ati Radeon 5670


    I have an ati radeon 1 gb graphic card, since my monitor only supports 1368 * 768 resolution it was enough to play most of the games in highest graphic settings. Crysis 2 in extreme settings gives me around 45-50 fps. Recently i updated the dx11 patch and only with the ultra settings it gives +-35 and when dx11 is enabled it runs at only 20-25 fps max. Will overclocking make the fps increase?

    Default core clock - 775 mhz and memory clock is 1000mhz.

    Thanks in advance
      My Computer


  2. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #2

    you can up the 775 core clock to 800 mhz and the 1000mhz memory clock to 1100 but you will get just a small gain besides if you never oc'ed a vid card before just better off leaving it alone if it plays your games fine no use in trying to fry your card for little gain .

    That's just my 2 cents but others may differ

    also you can use the AMD auto tune to OC it to be on the safe side
      My Computer


  3. Posts : 101
    windows 7 ultimate x32
    Thread Starter
       #3

    Solarstarshines said:
    you can up the 775 core clock to 800 mhz and the 1000mhz memory clock to 1100 but you will get just a small gain besides if you never oc'ed a vid card before just better off leaving it alone if it plays your games fine no use in trying to fry your card for little gain .

    That's just my 2 cents but others may differ

    also you can use the AMD auto tune to OC it to be on the safe side
    I use catalyst control to overclock but i want to know if it can handle tessalation, coz my pc has no additional cooling so i dont want to fry it...
      My Computer


  4. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #4

    well it should be able too but if you worried about cooling clean your caseout really good CAN AIR .

    I also would go ahead and throw another fan to be safe ,but that card should be able to handle it that was my first card when i built a new rig couple years back

    Im sure it wont generate too much heat compared to one's that use one or dual 6 pin connectors

    If i remember correctly the hd5670 uses a standard power cable so you should be fine
      My Computer


  5. Posts : 101
    windows 7 ultimate x32
    Thread Starter
       #5

    Ok then i'll give it a try but i dont think this card can handle dx11 of crysis 2, i've been playing battlefield 3 for a couple of days with ultra settings it too runs dx11 but no problem with that. Crysis 2 has more dx11 features than battlefield 3. Crysis 2 is awesome i've been playing the story mode for the third time it still feels and looks good this time.
      My Computer


  6. Posts : 12,364
    8 Pro x64
       #6

    bala2289 said:

    I use catalyst control to overclock but i want to know if it can handle tessalation, coz my pc has no additional cooling so i dont want to fry it...
    CCC doesn't touch the cards voltages, so temps from OCing aren't going to be as high as opposed to using an app like MSI afterburner which lets you adjust the voltages.

    For longevities sake, keep it under 85c @ load and you'll be fine.

    bala2289 said:
    Ok then i'll give it a try but i dont think this card can handle dx11 of crysis 2,
    Not with all the settings maxxed. Even a single OCed gtx580 struggles with C2
      My Computer


  7. Posts : 101
    windows 7 ultimate x32
    Thread Starter
       #7

    Not with all the settings maxxed. Even a single OCed gtx580 struggles with C2
    Yes, but my resolution is just 1368*768 and i dont enable motion blur and anti aliasing, it may work then? may be... my system runs crysis 2 at everything ultra settings and gives 35 fps enough for me. Only problem is tesselation and other dx11 features makes it pretty tough and gives just 20-25 fps.
      My Computer


  8. Posts : 1,846
    Windows 7 Ultimate x64, & Mac OS X 10.9.2
       #8

    id run it in compatibility and stick with dx10, then you get the features that crysis had on 10 over dx9, but still keep your performance.
      My Computer


  9. Posts : 12,364
    8 Pro x64
       #9

    bala2289 said:
    Yes, but my resolution is just 1368*768 and i dont enable motion blur and anti aliasing, it may work then?
    As with most games you have to adjust the detail settings to suit the game and your system.

    Despite the low resolution (which is close to CPU limited area) the 5670 is not an overly powerful card.

    DX11 features hammer performance. So if you are borderline to begin with, enabling DX11 features will be enough to introduce the drops you are talking about.

    Each of the effects have their own impact, so yes; disabling motion blur, AA etc will help improve performance.
      My Computer


  10. Posts : 101
    windows 7 ultimate x32
    Thread Starter
       #10

    Overclocking to 825mhz and 1200mhz gives blue screen error... Now running at stock speed.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:36.
Find Us