Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Graphic turns off on boot up

18 Apr 2012   #11
gardenwarlord

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Says status not available.


My System SpecsSystem Spec
.
18 Apr 2012   #12
gregrocker

 

Where did you get Win7? How is it activated after reinstall?

Reinsert the Product Key by opening an Elevated Command Prompt, type slmgr -ipk followed by a space and the product key.

Then type slmgr -ato to activate. Check Activation status again.
My System SpecsSystem Spec
18 Apr 2012   #13
gardenwarlord

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Says status not available.
My System SpecsSystem Spec
.

18 Apr 2012   #14
gardenwarlord

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

ON a computer running Microsoft windows non core edition run 'slu.exe 0x2a 0x8007043c' to display error txt. Error: 0x8007034c'

still not available...must be because I'm in safe mode.
My System SpecsSystem Spec
18 Apr 2012   #15
gregrocker

 

What about the other steps I gave you?

Did you do the test reinstall to another partition?
My System SpecsSystem Spec
18 Apr 2012   #16
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Did you run those commands from an elevated commang prompt ( press the start button, type cmd in the search box, right click the cmd entry that comes up, and select 'run as Administrator)? Also, go to start, on the right side, right click computer, select properties. scroll down to the bottom of the page. Do you have a genuine label there or what does it say? Also, go to Gigabyte's web site and gownload the graphics driver, Go to AMD's web site and download the driver for your graphics card. Uninstall all graphics drivers, then install the correct drivers for your system. You can use Driver sweeper to uninstall the graphics drivers, it does a very good job.
My System SpecsSystem Spec
18 Apr 2012   #17
gardenwarlord

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I tried what you suggested Greg..this one I did not fully understand(You could also try a test reinstall to a small partition you shrink from C to see if it starts normally, then Delete it to re-Extend in Disk Mgmt. If so then I would Clean Reinstall - Factory OEM Windows 7 - same steps for retail.
Partition or Volume - Shrink)

essenbe..I looked for driver sweeper but could not find a download link. I did re-install Graphics driver and I can tell it is working great on safe mode. Still no screen on startup...I can hear it..just no output to the monitor.
Windows 7 was purchased from Newegg...legit.
I did run the test as admin.
System says...Status not available
Product ID: Not available
My System SpecsSystem Spec
18 Apr 2012   #18
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Sorry about the bad link to Driver sweeper, it can be downloaded here. How about opening an elevated command prompt and copy/paste sfc /scannow. it is a system file checker and will try to repair any system files that are bad. Also, what anti virus program are you running? ( If you type the sfc /scannow, please notice the space between the sfc and / )
My System SpecsSystem Spec
18 Apr 2012   #19
gardenwarlord

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Hmmmmm.....sfc /scannow found no integrity violations. I was about to put kaspersky in but only using windows anti-virus.
My System SpecsSystem Spec
18 Apr 2012   #20
gregrocker

 

You can shrink the Win7 partition in Disk Management: Partition or Volume - Shrink

Then boot the Win7 installer to test install to that space you shrunk to see if the problem is solved by a Clean Install Windows 7.

If it solves the problem we can help you finish the install and remove the old one. If it doesn't fix the problem you can delete the test install partition in Disk Management: Partition or Volume - Delete

Questions?
My System SpecsSystem Spec
Reply

 Graphic turns off on boot up




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
My second monitor works on boot up but then turns black!
Hi there I recently upgraded to have two monitors for my pc. My graphics card is the AMD radeon hd 7770 and I have a Benq GL2250 and a Samsung S22B150. On first setup everything was fine with my first monitor (Benq) plugged in via vga from the monitor into a vga to which I think is a dvi-i...
Graphic Cards
Chkdsk Turns Itself Off At Boot
I recently developed a quirk on one of my systems. All are running Windows 7 Pro and running on a wired home network through a Netgear WNDR4500. On one machine, a Lenovo, if I tell it to run chkdsk on the C: drive at the next boot, it will seem to take the command properly. At the next boot, it...
Performance & Maintenance
Strange sporadic graphic issues, graphic lock ups (with Pictures)
Hello all, I think I have only seen something like this once :huh: and the problem was attributed to damaged RAM. This time around, the RAM seems to be in perfect working condition (tested with Memtest) and the problem still remains. I am starting to wonder if the graphic chip is not having...
Graphic Cards
computer turns on for a few seconds then turns off
okay so i am able to turn my computer on for a few seconds but then it automatically shuts itself off after a few seconds but the thing is after letting it sit for a couple seconds it says something about how the clocks on my processor have been overclocked too high and asks if it wants me to...
General Discussion
Computer won't boot up after installing graphic card
HI I bought a evga 550ti card and put it in my computer but when I turn it on it gets to the starting windows screen and then shuts off. Any help would be nice
Graphic Cards
Likely rogueware infection win7/screen turns black during boot
Hello, System: Win732 bit SP1 CPU: Intel dual core E-2160 Ram: 2GB When I boot regularly my screen just turns black prior to logging into windwos, i can hear the log on/off sounds. It works in safemode with network drivers.
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App