Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Nividia Gforce Gt 525m problem

06 May 2012   #1
sama7

Windows 7 Ultimate x64
 
 
Nividia Gforce Gt 525m problem

I can't see any other monitor on my device manger other than generic pnp monitor, doesn't another monitor should be displayed for the nividia GForce GT 525m card,

only in the display adapters the nividia appears , how is that possible and does it mean that the nividia card has a problem or what?, because I can't make any use of the nividia card as if it isn't there ,and I can't enable the 3d vision.

my laptop is inspiron n5110 i5 and I installed the drivers for nividia


My System SpecsSystem Spec
.
06 May 2012   #2
bobkn

Windows 7 Pro X64 SP1
 
 

I don't really understand your question.

The listings for the monitor and display adapter are separate in Device Manager. It's possible that there is no .inf file for the display.

I believe that the N5110 supports nVidia's Optimus feature:

Optimus Technology

I have no personal experience with it, but I believ that it requires that drivers for both the nVidia display adpater and the Intel onboard graphics be installed. (The Intel graphics are used for applications that don't need a lot of processing power, to extend the operating time when you're running on battery power.)
My System SpecsSystem Spec
06 May 2012   #3
sama7

Windows 7 Ultimate x64
 
 

maybe I started wrong , well my problem is that I can't enable the 3d vision , and when I try to open jps files I get this message "primary display adapter's does not support 3d vision", and this confuses me because the nividia card should support the 3d vision even when I tried to make nividia my preferred graphics processor the system stop responding , I even can't change the refresh rate to above 60hertz as the nividia is up to 80hertz, what do you think is the problem?
My System SpecsSystem Spec
.

07 May 2012   #4
bobkn

Windows 7 Pro X64 SP1
 
 

Is your model specified to support 3D Vision? There's no mention of it in the Setup Guide at support.dell.com.

hardware support for 3D Vision appers to be rare. (I've never had it, which makes me wonder why the 3D Vision drivers are installed by default with the nVidia driver package, evenon though they are rarely usable.)
My System SpecsSystem Spec
Reply

 Nividia Gforce Gt 525m problem




Thread Tools






Similar help and support threads
Thread Forum
After a few BSOD, NVIDIA GeForce GT 525M No longer working (Code 43)
After getting the BSOD "Bad system config info" a few times, I managed to get my laptop working once again via recovery, however, now my Nvidia GeForce GT 525M Display adapter no longer works. "Windows has stopped this device because it has reported problems. (Code 43)" I have attempted a few...
Graphic Cards
How can i set my NVIDIA GT 525M as primary display
Hi all, i have Dell inspiron n5110. My drivers : When i click Screen resolution : and it's using the integrated Intel instead of the Geforce 525M :
Graphic Cards
Nvidia Gforce GT 240 512MB Texture-Problem
Okay so i recently got hold of SKYRIM ! for pc. and i was playing it and about 6 minutes in to gameplay it crashed and un froze then it glitched and all the textures went funny. this happened alot with colin mcrae rally dirt 2 and 3 can anyone help ?? My system specs are windows xp...
Graphic Cards
nvidia 525m, how to use?
Hi, i am using wind 7 proffesional on my inspiron n5110 and when i right click on desktop chose screen resolution then advanced i see that i am using intel hd graphic family. This vid card is 64mb. instaled all drivers from this site for video and i dnt know how to change on nvidia ^.^ pls help...
Graphic Cards
nVidia GForce 250 GTS Installation Problem
Hi all. I am trying to install my XFX GTS250 (1gig) and it is crashing the computer. Upon boot everything looks fine until it trys to pass the starting windows screen and I get the BSoD and it auto reboots, trys to reboot in another mode and it just stalls out at the same place. I am...
Graphic Cards
Gforce Go 6150 problem
I have Driver Version 7.15.10.9759 installed on Win 7 64bit Ultimate Build 7100 installed on a Compaq Presario V6000AU Notebook If I let windows update install graphic drivers or when I do it manually, I lose my network connectivity and can only get back by going back to the above driver. I cant...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App