Quote: Originally Posted by alphanumeric
If there is no RED on that output I would suspect it was a fault in the Video card. Have you got another PC you can swap that card into as a test? What type of output is it, VGA, DVI, HDMI? Did you reseat the card in its slot?
I can ask one of my roomates, Output is DVI but I have adaptors for VGA, and yes i pulled out the card and put it back in twice.
Quote: Originally Posted by fseal
If you swap the connection of the two monitors to the video card, does the problem follow the monitor or the connector on the card?
If any monitor you plug into a single connector shows the same problem, then yea, something is probably wrong with the card (or possibly the connector itself).
Is the red /entirely/ gone? or just weak? (i.e. if you put something up that is bright red, is it red at all or is it black?)
There are a lot of color settings for most cards in the control panel... You can try to make sure that none of them are wacked out. Also try removing any monitor profiles and see if it goes away etc...
It follows the connector.
My background is mostly red/darker pink colors and it looks... well black and blue.
I believe I checked that, all settings are normal except for the red slider in that is just black.
I think you are right about the connector itself. When I have had to transport the tower itself in the past I left the adaptors hooked up to it and sometimes they were bumped pretty good in transport. Is there any way to check the connector itself?
I think I'll also try putting the card into a different slot on the same motherboard If I'm correct that will tell me if this is a motherboard or video card issue.
Edit: Putting it in a different slot on the same motherboard didn't work and trying it in a different computer doesn't help (blue tint still there on a different computer