nVidia GForce 250 GTS Installation Problem

Hi all.

I am trying to install my XFX GTS250 (1gig) and it is crashing the computer.

Upon boot everything looks fine until it trys to pass the starting windows screen and I get the BSoD and it auto reboots, trys to reboot in another mode and it just stalls out at the same place.

I am running Windows 7 Beta 64 bit.

When I removed the card and use the on board graphics everything goes back to normal and it works fine.

Please help!

Thanks!

First of please go to your user cp and fill out all your systen specs (top of page) Secondly did you disable onboard graphics in your bios (if an option?) Have you plugged in the neccesary power connectors to the card? Is it seated properly? Simple things but had to ask. Welcome to sevenforums. Fabe

thefabe said:

First of please go to your user cp and fill out all your systen specs (top of page) Secondly did you disable onboard graphics in your bios (if an option?) Have you plugged in the neccesary power connectors to the card? Is it seated properly? Simple things but had to ask. Welcome to sevenforums. Fabe

Click to expand...

1. Could not disable it in BIOS
2. Yes
3. Yes

Like I said, everything seems fine until I get to the login screen and the BSOD says I have a hardware failure.

The card is plugged into a PCIe 16 slot (the motherboard is cheap) could I need a different motherboard with the PCIe 2 bus?

I would first try updating my chipset drivers and my bios since the board is old. Of course using the onboard graphics to do this. Then I would try the card again.

thefabe said:

I would first try upadting my chipset drivers and my bios since the board is old. Of course using the onboard graphics to do this. Then I would try the card again.

Click to expand...

Will do.

Thanks.

yea i have the same card and just got windows 7 used the onboard to dl and install the drivers and then shut down put it back in and worked