NVidia Quadro driver help - Windows 7 Help Forums
Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: NVidia Quadro driver help

24 Sep 2009   #1

Windows 7 Pro 32Bit
NVidia Quadro driver help

I have an nVidia Quadro in my desktop here at work, just installed Windows 7 Pro 32Bit (trying all the flavors before rolling out to prospective clients).

I can get multiple displays running but I've encountered a problem that has driven me to the breaking point.

From my onboard VGA, I can get full resolution and a great picture. From my Quadro all I get in dual dispaly (not the full 3 or 4 I want) and when it does display on two screens together, it's mirrored.

The display options are only seeing the monitors and Generic PnP and it detects the two both as monitor "1". Their resolution is stuck to 1024x768.

Here's the stranger part: In my Hardware Profiles, it has 2 Standard VGAs listed in Device Manager and 2 "Intel(R) 82915G/GV/910GL Express Chipset Family". One of the "Intel" chip and one of the "Standard VGA" each are showing that the devices could not start.

I've uninstalled the drivers for all 4, rebooted, removed them from device manager and even switched my BIOS to boot from the onboard instead of Auto (Dell BIOS).

To finally confound things more, when I do reboot, guess what displays on the BIOS? QUADRO!

My BIOS obviously recognizes and identifies the card, but 7 is just throwing it down. I've tried the new Forceware drivers as well as every driver nVidia had listed for Windows 7 32bit for every model of NVS Quadro with no avail, it just says that no matching hardware is found.

Can this be addressed and fixed or should I just start getting rid to roll over clients video cards like crazy?

My System SpecsSystem Spec
25 Sep 2009   #2

Windows 7 ultimate 64 bit / XP Home sp3

I think this is a windows seven configuration problem as in a previous post where someone wanted to run 2 displays from 1 card in PCI-e and 1 from a pci slot. Yet would get an error 10 message pci bridge to pci bridge. Yet he could run this setup in XP. My first thought for you is to load the display driver that is showing the PnP display, as well as the drivers for the other 2 displays. but if the graphics chips are not compatible your going to have issues. onboard VGA chip verus Quadro chip displaying at different refresh rates and resolutions. Of course with the new ATI Hd 5870 you can run 3 displays from 1 card 2 dvi and 1 hdmi, all for around 380.00. Anyway at this time I don't think windows seven from all the articals I researched for the other thread is capabel of these kind of 3 display configurations. Sorry I know this is of no value to you but thought I'd throw in my 2 cents worth . Here is a great artical on ATI's new eyefinity techknowledgy ATI Radeon HD 5870: DirectX 11, Eyefinity, And Serious Speed : Introduction - Review Tom's Hardware by the way these cards are now for sale at the egg. Welcome to sevenforums and let us know if you figure this out. Fabe
My System SpecsSystem Spec

 NVidia Quadro driver help

Thread Tools

Similar help and support threads for2: NVidia Quadro driver help
Thread Forum
Nvidia Quadro FX 1400... What to do with it? Graphic Cards
Nvidia Quadro NVS 400 Drivers
Drivers for NVIDIA Quadro 2500M? Graphic Cards
No dual monitor with Nvidia Quadro CX Graphic Cards
nVidia Quadro NVS 140M plus Aero Graphic Cards
NVIDIA Intros Quadro CX Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:12.
Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App