Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: dual Screen strat up problem. one monitor stys black

15 Dec 2012   #1
Quess

Windows 7 home premium 64-bit
 
 
dual Screen strat up problem. one monitor stys black

Greetings i have been fighting my system for some time now. the problem is when i boot up my computer one of my screens stays black.

if i then turn the screen off and back on 20 to 30 times it well come online and stays on.

it seems to me that if i leave the computer on for a little before i start to turn my screen on/off i have to do it less. but i have tryed to leave it on for 30 min and see. but i still had to turn the screen off/on several times before it worked

i am running:
windows 7 home premium
AMD prossesor
500W power sup
Radion HD5770 (Driver is version 12.10 the newest version)
motherboard is Asus M4a78 Pro

i have attached 2 Screenshots one wheer you can see my Screens, it is the left one i have to turn on and off to get to work(ViewSonic) and the right one works right off the bat (Digital Square)

the other ScreenShoot is the back of my computer where you can see the screens connec to my computer, as you can see one of em is running on a adaptor it is the Digital Square that is useing the adaptor aka the screen that works all the time.

i have tryed to use the ViewSonic solo but i still have the problem.

i am correct at the stages where i am ready to get a flower pot that i can place in the room in the hopes that turning it the right way well make this work. i have all ready been in the computer dusting it off and cleaning it out in case it was a heat/dirt problem. and last i check with a power sup calculate my system needed around 350W. so i still have some power left in the computer even if it was a bad power sup.

thanks for you time i hope you can help me
Quess




Attached Thumbnails
-pcback.gif   -screensetup.gif  
My System SpecsSystem Spec
15 Dec 2012   #2
jgiels

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Change where they connect to the video card. To see if it makes the digital one intermittent. If it doesn't follow then I'd say your monitor is dying.
My System SpecsSystem Spec
16 Dec 2012   #3
Quess

Windows 7 home premium 64-bit
 
 

not a happy Smurf.

changing it around dit noget have a effect.
i guess a solo test will say everything.
i well try it out on a diffrent system. but i ned to get one here or move the Screen to it.
i well get back to you with the result.

thanks for the help for now
My System SpecsSystem Spec
17 Dec 2012   #4
Quess

Windows 7 home premium 64-bit
 
 

i switched the Screens around both in the back of the PC and om my table, and in the software. and the problem is still the same. guess i well go find a nye monitor.

thanks for your help. so fare. i well report the result once i have the nye hardware
My System SpecsSystem Spec
Reply

 dual Screen strat up problem. one monitor stys black




Thread Tools





Similar help and support threads
Thread Forum
Monitor Goes Black in Dual Monitor Configuration
I have been running a dual monitor setup for several years without issue. I was using a 28" Hanns G 16:10 1920x1200 via HDMI & an ASUS 27" via DVI. They were connected to a Zotac GTX 570 and then later to a Gigabyte GTX 770 4GB graphics card. About a month ago I substituted a 30 Inch Monoprice...
Hardware & Devices
Dual Monitors, Monitor two black
Hi guys ok so I have two screens set up one of them is my usual display. A acer x223HQ PC monitor the other is a Samsung TV There are both connected into the graphics card and not the motherboard. but yet screen two is black. The rez for both screens are set too 1440x900 the monitor can go...
Hardware & Devices
Dual Monitor Screen Resolution Problem
Hey Guys, Heres whats going on, I have dual monitors setup on my computer. My main screen is a Samsung SyncMaster 933 and my secondary screen is a HP 1740, what is going on is my main screen keeps going to the secondary screen's resolution and i want to stop that from happening every time i...
Graphic Cards
dual monitor Black Screen
I am running a brand new alienware computer (win7 64 ult) with the new 23" LCD that it came with. It has an NVIDIA GeForce GTX 580. (2 DVI outputs) with the most recent NVIDIA drivers When I connect an old CRT using the DVI-VGA adapter as a second monitor everything works fine. When I connect...
Graphic Cards
Dual Monitor, but Yellow Monitor in Extended Screen
i have GeForce 8400 GS this VGA Card have 2 output VGA and DVI 1 Output VGA = going to my SAMSUNG LCD Screen ( Nice ) 1 Output DVI ( im using DVI to VGA Adaptor like http://upload.wikimedia.org/wikipedia/commons/b/ba/Adapter_DVI_to_VGA.jpg ) = Assus VH192, but isn't work. My ASUS SCreen going...
Graphic Cards
Dual Monitor showing black barz on TV(top,bot,R,L)
Thank you for any and all help, I have a home built Rig. Running Win7 RC 7100. Very happy with it. I just had a DVI/HDMI adapter, 15ft HDMI 1.3 cable and a 20ft coax cable delivered. MONOprice.com for the win on those(less than $20 delivered in less than a week) Anywayz, I set up the cables...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:47.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App