How to improve VGA quality?

I have a 1080p LG LCD Monitor.

It has 2 inputs, DVI and VGA. I have two different types of cables, HDMI-DVI and VGA-VGA. I tried connecting my laptop to the monitor.

My laptop has two outputs, VGA and HDMI. When I use the HDMI output, the image on my monitor is sharp and clear. When I use the VGA output and the VGA-VGA cable, the image on my monitor is blurry.

Is there any fix?



EDIT: My VGA connector also has one peculiarity. From the point of view of the sockets, Pin No. 9 is missing, for both ends. (although it may unused)

luckyrick said:

bassfisher6522 said:

The vga cable has a lower resolution than HDMI and the HDMI cable is designed to carry the 1080p resolution along with sound. Stick with the HDMI cable it's much better as you found out.

then why are all these people saying the exact opposite?
vga worse than hdmi - Google Search

If you actually read most of the threads it finds, the answers are that it's a scaling issue and that it is fixed by telling the TV that it is coming from a PC from its options or from graphic card's control panels in the computer.

VGA is very old and is worse than HDMI, but for most non-TV resolutions it's the same, and all VGA cables I know have all the pins.

This post says what the pin 9 does on a VGA.

I'd frankly buy another VGA cable just in case.

non-TV resolution is a resolution of a computer screen. TVs are different, and depending on model they may be throttling down input from VGA for uhm... marketing reasons.

VGA is able to handle 1080p just fine (you don't notice the difference between VGA, DVI and HDMI), so I think your cable is damaged/old/defective. Cables can screw up things and I fixed quite a few "video issues" by changing the VGA cable.

I notice a substantial drop in image sharpness, still not sure if that is considered normal.

It's not normal.
Can you check that windows is set to run at the right resolution? (right click on an empty spot of the desktop, and select Screen Resolution to access the relevant settings panel) the VGA cable you are using (that lacks pin number 9) prevents the monitor from telling its specs to the computer, so you have to set the resolution manually.

Again, buying a VGA cable with all pins in their place allows the screen to communicate with the computer, and if that was the case Windows 7 will start spamming popups saying "this resolution is not optimal" offering you to set it to the screen's native resolution.

Most monitors come with a digital driver &
An analogue driver

Heh, I'd say the port on either the laptop or the monitor is damaged then. Try using the VGA on another monitor, and if it works fine the broken port is the one of the monitor.

Also, what is that laptop's graphic card? Intel ones sometimes hate some screens for unknown reasons.