Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Tv not displaying anything after boot and windows logo

16 Jan 2013   #1
boomboxjones

windows 7 home premium 64bit
 
 
Tv not displaying anything after boot and windows logo

hi guys, i'm new here and i know there are many posts similar to this but i have not found a solution that helps me so here the problem.

I have a machine running windows 7 64bit and previously i had a 500gb hdd in the machine, i purchased a tv monitor of a friend who had upgraded his, but once i connected this through dvi i have the issue stated no signal past the windows logo upon boot. my friend came around to my house one night and solved this issue, he did something within the task manager and something else and by magic it worked, i think he said something about conflict of drivers i'm not too sure we are going back a few years. So i KNOW that my monitor works because it has been working for 3 years at least.

Now my hdd failed so i recently upgraded for a nice new ssd super quick as we all know, i did a fresh install of windows and now i am having this same issue with my monitor not displaying and unfortunately for me this time i have not got a friend so close by to come and fix this again.

so what i do know is that there is a fix somewhere within windows and that i do not have any faulty hardware or monitor, but i am stuck.

if anyone knows what this fix is please can you help me out because it is starting to annoy me knowing the fix is out there and i can't figure it out!


My System SpecsSystem Spec
.

17 Jan 2013   #2
Wrenches

Windows 7 x64 Home Premium
 
 

I'm pretty new to Win 7 but I wondered if it's a resolution problem. I hope that when you boot up you can press boot options and see if you can boot to VGA mode. If not then safe mode.

If you did get a screen change your resolution to lower.
My System SpecsSystem Spec
18 Jan 2013   #3
braddersz

Windows 7 Home Premium 64 Bit
 
 

What make and model is your motherboard, what's the driver version your currently using for the graphics card? Check in device manager.
Also, is this a new Dvi cable?. Does it have the correct pins?. Some have more then others.
My System SpecsSystem Spec
.


18 Jan 2013   #4
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Also what is the make & model of the TV ? What different resolutions does the TV allow ? Is there a switch or menu option on the TV or remote to change resolution ?
My System SpecsSystem Spec
Reply

 Tv not displaying anything after boot and windows logo




Thread Tools





Similar help and support threads
Thread Forum
Delay before windows logo at boot.
Hello, So, i got a new pc, everything works fine except one thing: There is a 5-6 seconds delay before the windows 7 logo shows up, something which is not present to any pc i made. I have a smimilar pc on amd (like mine) where the delay is 0, it just boots>post>that underline for HDD...
General Discussion
Artifacts During Boot Windows Logo.
About 3 weeks ago i installed Guild Wars 2 and was required to update my Video card drivers before i could play 306.23 i believe they were ( i have tried so many other versions and older ones now i forget) since then i have experienced Crashes, Artifacts and lock ups in all games i play including...
BSOD Help and Support
Cannot Boot - Hang on Windows Logo
Thanks for reading. My laptop has mysteriously stopped booting as of last Saturday. I suspect it may be because I had stopped a windows update (I cancelled it while it was running and then it hung during shutdown). When it hung during shutdown, I had to hard-power it off to turn the machine off....
General Discussion
Windows 7 boot logo missing
Hey everyone, this may sound as some standard thread but i really tried everything to fix this. I got two problems: - Windows 7 logo is missing ( using Vista standard ) - bootrec can't find a windows installation (/scanos) which prevents me from using the /rebuildbcd command. What I've...
Installation & Setup
Windows 7 Boot Logo
Hi all... Is there any way by which we can change the Boot logo which comes like animated while Windows 7 starts. No disrespect to Windows but m bored of seeing that logo.... Thanks
General Discussion
Stuck at the Windows logo during first boot
I am trying to dual boot Windows 7 Home Premium and Ubuntu 10.04 on my laptop (Toshiba Portege M400). I had Ubuntu 10.04 installed previously but I decided to wipe my hard drive before installing Windows 7. I used GParted to delete all my partition and setup two new ones. I formated the first...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App