Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: removed Gigabyte GTX 670 oc to clean it and case now BSOD ERRORS

07 Aug 2013   #11
bobafetthotmail

Win 7 Pro 64-bit 7601
 
 

I suggest to follow the Blue Screen of Death (BSOD) Posting Instructions and then open a thread in the BSOD section of the forum.


My System SpecsSystem Spec
.
07 Aug 2013   #12
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Are you running 320.49?
My System SpecsSystem Spec
07 Aug 2013   #13
Taza13

Windows 7 Ultimate x64
 
 

Yea I was running 320.49
My System SpecsSystem Spec
.

07 Aug 2013   #14
Taza13

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by bobafetthotmail View Post
I suggest to follow the Blue Screen of Death (BSOD) Posting Instructions and then open a thread in the BSOD section of the forum.
Thanks for that ill do that in the morning
My System SpecsSystem Spec
07 Aug 2013   #15
Taza13

Windows 7 Ultimate x64
 
 

Ok booted up this morning removed drivers and let windows install them then rebooted did genuine drivers and all seems fine.... go figure it must of had a moment lol
My System SpecsSystem Spec
07 Aug 2013   #16
smarteyeball

 
 

I've experienced a few of those 'moments' myself. Never quite got to the bottom of why though. Windows just seems to jump the gun and goes 'ah ha - change! whilst easily forgetting to go ah ha - same, carry on!'

Removing the drivers seems to reset that frustrating little quirk for the most part. Glad you got it working again though
My System SpecsSystem Spec
08 Aug 2013   #17
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

Quote   Quote: Originally Posted by Taza13 View Post
Ok booted up this morning removed drivers and let windows install them then rebooted did genuine drivers and all seems fine.... go figure it must of had a moment lol
cool hope it is all working ok now would you like this thread marked resolved now?
My System SpecsSystem Spec
09 Aug 2013   #18
Taza13

Windows 7 Ultimate x64
 
 

Well that was short lived
so far 3 different bsod messages now

system service exception

page fault in nonpaged area

dxgmms1

im about to throw this down the stairs....
ill I did was remove clean replace the graphics card. Now ive remove ram and did the same

Taza
My System SpecsSystem Spec
09 Aug 2013   #19
Taza13

Windows 7 Ultimate x64
 
 

I think the can of compressed air did something. Tho the can was always upright I think something must of came out or why else would this start to happen. Been trouble free since building it 14 months ago...

Taza
My System SpecsSystem Spec
09 Aug 2013   #20
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Please read post #11 again.
Removing a video card dose not change drivers or bios if you had the computer powered down. Double check your mounting of the video card and harness connection. Make sure you have installed the card in the proper position as per motherboard manual.
My System SpecsSystem Spec
Reply

 removed Gigabyte GTX 670 oc to clean it and case now BSOD ERRORS




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Malware Clean-up removed absolutely ALL program association! SOS
I was doing a Malware removal on my little brothers Windows 7, 64 bit laptop. :geek: Using Revo un-installer pro, I planned to remove all the contaminated software, followed by running ADWcleaner, Malwarbytes, and then HITmanpro3. Unfortunately, whilst going through one item at a time in Revo,...
Backup and Restore
many validation errors after clean installation
i had clean installation of windows 7 professional sp1 32, on VAIO VGN-FZ11Z. it is giving me many validation errors here n then, mostly when i launch an application or setup file. I have not installed any drivers for it until now bcz im not finding them. The windows is also flagging for driver...
BSOD Help and Support
Easy CD Creator 5 errors, removed now CDROM errors
I was trying to troubleshoot two errors in Event Viewer and know they were caused by Easy CD Creator 5 so I uninstalled it and then my DVD players would not work. cdralw2k.sys and cdr4_2k.sys were the cause of the errors and were incompatible with Windows 7. Did a system restore to get the DVDs...
BSOD Help and Support
Clean Wipe & Install Errors..
Hey there, basically my problem is that I want to wipe my computer clean, and have a fresh install of Windows 7. I have the discs that came with my computer. But here is the problem, when I boot my PC up with my CD Drive running first with the first installation CD, the computer says: "CD-ROM...
Installation & Setup
Windows 7 clean install on SSD - Now BSOD errors galore
Hi Everyone, First time poster but I have often lurked and found solutions here. Yeah! This time though I'm not sure what to do to get my computer up and running again. I'm happy to say that I've rarely had a BSOD and now while rebuilding my system I'm getting them all over the place. ...
BSOD Help and Support
Same BSOD errors before and after clean install
Towards the end of January, I was receiving a BSOD which would not allow me to log in normally. After trying various methods, I bought a new hard drive and performed a clean install (retail). Several days later from the clean install, I am receiving the same errors I was getting before. I am...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App