Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: removed Gigabyte GTX 670 oc to clean it and case now BSOD ERRORS

07 Aug 2013   #1
Taza13

Windows 7 Ultimate x64
 
 
removed Gigabyte GTX 670 oc to clean it and case now BSOD ERRORS

Today I removed my Gigabyte GTX 670 so can de dust it and the computer. Ever since re installing it I have issues with BSOD with either these to messages


system service exception
and
page fault in nonpaged area

very frustrating

cheers
Taza


My System SpecsSystem Spec
.

07 Aug 2013   #2
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

hi
when you cleaned did you use a compressed air canister? and have you checked you have the card is seated properly and any plugs on MB have not come disconnected?
My System SpecsSystem Spec
07 Aug 2013   #3
Taza13

Windows 7 Ultimate x64
 
 

hi there yes I did use a can of compressed air the card appears to be seated correctly. I Have put it in a few times to be sure. It clicks in. the only cables I have connected are the pci express power cables the 6pin and 8 pin plugs

cheers
Taza
My System SpecsSystem Spec
.


07 Aug 2013   #4
Taza13

Windows 7 Ultimate x64
 
 

I'm thinking of resetting the bios and reinstalling windows you think this could help
My System SpecsSystem Spec
07 Aug 2013   #5
Boozad

W7 Pro x64 SP1 | W10 Pro IP x64 | W8.1 Pro x64 VM | Linux Mint VM
 
 

Do you have onboard graphics you can boot with? Just to rule anything else out?
My System SpecsSystem Spec
07 Aug 2013   #6
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

i would uninstall the driver from device manager turn pc off take card out resit card boot up pc let windows install driver make sure you have a connection to internet.
My System SpecsSystem Spec
07 Aug 2013   #7
brianzion

Operating System : Windows 7 Home Premium Edition 6.01.7600 SP1 (x64)
 
 

My System SpecsSystem Spec
07 Aug 2013   #8
Taza13

Windows 7 Ultimate x64
 
 

okay I will try that the only way I will be able to remove the drivers is to run it in safe mode or through the onboard graphics card it usually hangs on boot up or just after login screen
My System SpecsSystem Spec
07 Aug 2013   #9
Taza13

Windows 7 Ultimate x64
 
 

i7 3770K has an Intel HD4000 graphics chip on board
My System SpecsSystem Spec
07 Aug 2013   #10
Taza13

Windows 7 Ultimate x64
 
 

Yea the i7 3770K has an Intel HD4000 graphics chip on board so ill try that tomorrow.

I also seem to can't run my dual monitors I guess have something to do with this potential driver issue
My System SpecsSystem Spec
Reply

 removed Gigabyte GTX 670 oc to clean it and case now BSOD ERRORS




Thread Tools





Similar help and support threads
Thread Forum
Malware Clean-up removed absolutely ALL program association! SOS
I was doing a Malware removal on my little brothers Windows 7, 64 bit laptop. :geek: Using Revo un-installer pro, I planned to remove all the contaminated software, followed by running ADWcleaner, Malwarbytes, and then HITmanpro3. Unfortunately, whilst going through one item at a time in Revo,...
Backup and Restore
many validation errors after clean installation
i had clean installation of windows 7 professional sp1 32, on VAIO VGN-FZ11Z. it is giving me many validation errors here n then, mostly when i launch an application or setup file. I have not installed any drivers for it until now bcz im not finding them. The windows is also flagging for driver...
BSOD Help and Support
Easy CD Creator 5 errors, removed now CDROM errors
I was trying to troubleshoot two errors in Event Viewer and know they were caused by Easy CD Creator 5 so I uninstalled it and then my DVD players would not work. cdralw2k.sys and cdr4_2k.sys were the cause of the errors and were incompatible with Windows 7. Did a system restore to get the DVDs...
BSOD Help and Support
Clean Wipe & Install Errors..
Hey there, basically my problem is that I want to wipe my computer clean, and have a fresh install of Windows 7. I have the discs that came with my computer. But here is the problem, when I boot my PC up with my CD Drive running first with the first installation CD, the computer says: "CD-ROM...
Installation & Setup
Windows 7 clean install on SSD - Now BSOD errors galore
Hi Everyone, First time poster but I have often lurked and found solutions here. Yeah! This time though I'm not sure what to do to get my computer up and running again. I'm happy to say that I've rarely had a BSOD and now while rebuilding my system I'm getting them all over the place. ...
BSOD Help and Support
Same BSOD errors before and after clean install
Towards the end of January, I was receiving a BSOD which would not allow me to log in normally. After trying various methods, I bought a new hard drive and performed a clean install (retail). Several days later from the clean install, I am receiving the same errors I was getting before. I am...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:21.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App