Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Can't set resolution to 1920x1080 !

09 Sep 2013   #1

Windows 7 Ultimate 64bit
Can't set resolution to 1920x1080 !

Hello guys ! I have one problem,I can't set my res to 1920x1080.
This is my monitor - LG Flatron W2046S. It supports 1920x1080.
Every time I press on ''APPLY'',I get a black screen which says :
Out of range.
67.5MHz of 60 MHz ( something in those lines).
I tried settings my max refresh rate to 60 in CCC,didn't work either.
Any help would be appreciated

My System SpecsSystem Spec
09 Sep 2013   #2
Microsoft MVP

Win 7 Ultimate x64

You sure about that resolution? According to LG it is only a 1600x900 monitor,

My System SpecsSystem Spec
09 Sep 2013   #3

Windows 7 Professional x64 Service Pack 1

Stormy is correct, and you will get that message when you try to go above the native resolution.
My System SpecsSystem Spec

10 Sep 2013   #4

Windows 7 Ultimate 64bit

Well,this is embarrassing. But thank you )))
My System SpecsSystem Spec

 Can't set resolution to 1920x1080 !

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
missing 1920x1080 resolution
Hi guys i have tried googling and other forums to no avail so you are my only hope,so wondering if any of you guys have had this problem?, i have recently just formatted and re-installed windows 7, steam and counter strike source and previously i used to run my game at 1920x1080 but since...
Graphic Cards
Screen resolution will not display 1920x1080
I have read in previous post that a lot of people have had a similar problem, however there solution did not work for my own problem. Problem- I have Sony Vizio, display name of E320VP, 1920x1080. When I right click and go to screen resolution it will not let me go pass 1366X768. I have tried...
Graphic Cards
Desktop is cut in 1920x1080 resolution
Hello, I have a Radeon HD 4350 based display card, Dual boot PC with Win XP & Win 7 64 bit connected with a VGA cable to the monitor. I use a resolution of 1920x1080 for both OS. Yesterday, I booted up Windows 7 and I noticed that the left side of the desktop is missing (the part with the...
Graphic Cards
Cannot switch on to 1920x1080 resolution...
Hi guys, I am using Sony Bravia Ex300 27" and windows professional x64 wiht XFX Radeon 4870 1gb DDR card the problem is that my desktop resolution shows only 1376 x 726 (recommended) i wanted to go in full HD 1920x1080 as my monitor will support it (i guess).. can u guys help me... please..
Graphic Cards
Cannot Select 1920x1080 Resolution
I am using an ASUS monitor model ML228, ATI Radeon 3300 Graphics, and Windows 7 32-bit. I have used this monitor before at the correct resolution of 1920x1080, but now it is not available to select from the screen resolution manager. I read through a couple of other threads that said to...
Graphic Cards
Status of 1920x1080 resolution with Win 7 now ?
I am re-launching the question after sone search here, answers that seemed to work in December 2009, but we're now in January 2011, I have this new monitor installed to replace my 17 inches (with no effect as I have to run it at 1440x900 to fill the screen - no black stripe). PROBLEM : my new...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:21.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App