Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Pc/T.v Resolution problem (VGA)

27 Nov 2013   #1
bennyl1708

windows 7
 
 
Pc/T.v Resolution problem (VGA)

Hi guys plugged vga lead into laptop n tv...right clicked and switched to "display on 2" after i upped the resolution and applied. Tv went blank and said "unsuporrted resolution" at that point both screens were blank. I pulled the lead and laptop came back on....but i cant change the resolution back down on the tv without plugging it in but of course it goes blank on tv...but displays for about 2 seconds then back to blank im mega confused please help...


My System SpecsSystem Spec
27 Nov 2013   #2
Ranger4

Windows 7 Home Premium 64 bit sp1
 
 

Welcome to Seven Forums.
Turn off your TV & unplug it from the wall, wait a few minutes & reconnect it & turn it on.

You could try resetting your TV to factory defaults. Refer to you TV handbook if you have one. Operate your TV without having it connected to your computer & have the antenna lead connected. Use the menu on the TV using the remote control to find settings.

Hope this helps.
My System SpecsSystem Spec
27 Nov 2013   #3
bennyl1708

windows 7
 
 

Hi..its not a problem on the tv its the resolution settings for screen 2 on the pc i cant change the resolution setting for screen 2 (tv) when unplugged. The setting only comes up when plugged in.. but i cant see it..
My System SpecsSystem Spec
27 Nov 2013   #4
Indianatone

Windows 7 x64 Ultimate and numerous virtual machines
 
 

Hi bennyl1708 and welcome to Seven Forums.
The problem with using VGA on a TV is most if not all TV's have a low resolution input such as 1024 x 768. The laptop probably sent something the TV did not understand and has messed up the settings. If you have an HDMI input youacould try that. You should have Function Keys and pictures of monitors on certain keys on the Laptop, try pressing those with the laptop connected to the TV to cycle through modes
My System SpecsSystem Spec
Reply

 Pc/T.v Resolution problem (VGA)




Thread Tools





Similar help and support threads
Thread Forum
Name resolution (DNS) problem
for some reason, Internet host names stopped working on my machine. Please see this log : c:\>nslookup ya.ru Server: ns1.fryazino.net Address: 192.168.2.20 Non-authoritative answer: Name: ya.ru Addresses: 2a02:6b8::3 213.180.193.3
Network & Sharing
Resolution problem
My native resolution is 1600x1200 but when i change my resolution to 1600x1200 it says 'frequency out range'. I have intel g31 without other graphic card.Then i installed gma driver it shows complete list of all resolutions but i cant set any resolution above 1600x900. But it looks everything...
Graphic Cards
Resolution problem.
I have a resolution problem. I plug out main cable from pc yesterday and today i plug it in, and turn on pc. When i turned it, resolution has changed. I had 1680x1050, the recommended one. Now, i'm trying to change resolution back on 1680x1050, but i can't set it :S i update driver, and got a few...
Graphic Cards
Resolution Problem! Please Help!
Hi, Right to start off I have dual 22" monitors, they both run at 1680x1050 and are both exactly the same, they are both LG Flatron WIDE M228WA's they are primarily monitors but have TV capabilities. My Problem: Whenever I go to change my resolution, wether it be through windows or...
Graphic Cards
Resolution problem need help!
So here's my issue, I am using a dual screen display using an lg for my main and a sony bravia 40 inch lcd for my secondary monitor. I recently switched from 32 bit vista to 64 bit 7. With this switch i got new drivers for my nvidia 9800gtx+. Anyways when running vista i was able to get a custom...
Graphic Cards
resolution problem!
i installed the windows everything was perfect at the first look, but the the resolution was 1680 x 1050 and i wanted to change it back to 1280 x 960(witch i used whit vista) but when i choose it everything is a little blurry and i also have 2 black labels in the left and the right of the screen! i...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App