Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Monitor says "No Signal"

20 Jan 2014   #11
Beachy

windows 7 64bit home premium
 
 

I am getting a 30 second freeze after installing new RAM and BSOD with memory codes
This is my system specs and its all new, i replaced everything withing the past month.
MB is
Gigabyte MB GA-B85M-D3H - This board supports DDR3 and XMP
http://download.gigabyte.us/FileList...b85m-d3h_e.pdf
RAM is
Crosshair Vengance DDR3 2x4GB - 1600Mhz - Corsair CMZ8GX3M2A1600C9B 8GB 1600Mhz CL9 DDR3 Vengeance Memory Module Kit
http://www.amazon.co.uk/Corsair-CMZ8...31&s=computers
CPU is
CPU - Intel Core i5 4440 Quad Core CPU Retail (Socket 1150, 3.10GHz, 6MB, 84W, Extended Memory 64 Technology
Power is
Crosshair 750w

Its running at 1333 which might be the reason for the freezes .
My questions are ......
Should i set up XMP - and if so will it help. I think the bois is using the JEDEC timings?
Report from CPEz ..
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-17-22 @ 457 MHz
JEDEC #2 7.0-7-7-20-26 @ 533 MHz
JEDEC #3 9.0-9-9-25-33 @ 685 MHz
Can anyone give me step by step instructions on how to set this RAM to make my system stable. Im not great at understandin Bois features but if i have step by step I can follow


My System SpecsSystem Spec
.
20 Jan 2014   #12
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

First, be sure the RAM is compatible with the motherboard. The most important specification is the RAM voltage. Check the QVL for the motherboard and note the specs of the RAM modules listed as compatible and compare that to the specs for your RAM (if your RAM is not on the list already).

Then check the manual for the motherboard and make sure the RAM is installed in the proper slots. Don't assume that Slot 1 & 2 are the proper slots for 2 sticks of RAM! Gigabyte boards can be weird that way.

Then, note your important custom user settings in BIOS, and reset the BIOS defaults, restart and go back into BIOS immediately, and reset only the important choices (Like AHCI for instance). Avoid making any other unnecessary choices.

Then set the RAM to XMP and let the board do the rest. Don't play with overclock settings until you have some knowledge and know what you are doing.

If that does not solve it then try using just one stick of RAM in the first Slot. If needed, switch it out for the other stick, and so on.

Also run Memtest86+ - Advanced Memory Diagnostic Tool on the RAM, at least 3 passes - 8 if possible.

Lets see if any of that gives more clues.
My System SpecsSystem Spec
Reply

 Monitor says "No Signal"




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Monitor displays "no signal" when HDMI is used
Alrighty guys, i have a problem. About a week ago, my PC was running just fine. My monitor was also running fine(Im using a HDMI cable for my monitor). Then one morning i turn on my PC, and my monitor displays "no signal" with a black background. So i try using the VGA cord and poof! It works!...
Hardware & Devices
Monitor "No Signal" Turns Off when Windows 7 loads
Basic Info (clickable for links): Card: Nvidia GeForce GT 640 CPU: Intel Core i5-3350P Ivy Bridge Quad-Core 3.1 GHz MoBo: ASRock LGA 1155 Intel B75 Micro ATX Motherboard Ram: G.SKILL Ripjaws Series 2x4GB DDR3 Ram PSU: Antec EarthWatts 500W PSU Bronze Certified Hard Drive: Western Digital...
Graphic Cards
Monitor "no Signal" after Windows Boot
Hi, this is a problem with completely new hardware: - 350W power suply. this is not strong enough but the problem keep happenung without external graphics card - 4x4 CorsairDDR3-1600 DIMM CL8 - AMD A10 Series A10-5800K - XFX Radeon HD 7970 925M - Gigabyte GA-F2A75M-D3H - windows 7 SP1 64bit...
Installation & Setup
New Monitor reports "No Signal" with display driver enabled
How can this be so hard? Why does Windows make it impossible to change monitors? Here's a summary of the problem, with details below: System: Windows 7-64 HomePremium SP1 with all important updates, Radeon HD 4830 video card. Gigabyte MB, Intel E8500 CPU, 8GB memory. My old monitor gave...
Graphic Cards
After monitor off + on: "No imput signal" + black screen
I started successfully my Windows 7+SP1 with newest patches and can work normally. Then I turn off my TFT monitor (not the running computer). Win7 continues to work (as hard disc LED indicator and remote control tools prove). Later I try to turn on my monitor again. But much to my...
Graphic Cards
New TFT monitor displays "No Signal" message
My old CRT monitor (Samsung 957DF) finally completely died yesterday so I had to replace it. Several months ago I bought a relatively cheap TFT monitor (Acer V223HQ Bb) and while my Windows 7 installation was still fresh, I could switch between the two monitors (Samsung CRT and Acer TFT)...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:38.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App