Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Resoulution detected by monitor wrong

31 Aug 2014   #1
sfmudd78

Windows 7 Home Premium 64 bit
 
 
Resoulution detected by monitor wrong

Hi, My onboard intell HD 4000 video resoulution is set to 1280 x 768. I use a samsung HD TV as my monitor hooked up via HDMI cable. THe TV used to always dispaly the resoulution that the video from computer was set at. Either 1024 x 768, or 1920 x 1080. The latter makes everthing to small so I settled at 1280 x 768. but when i press info for the samsung it reports 1920 x 1080 when the video from computer is set at 1280 x 768. It nver did this before. Is this because of display scaling to full Screen. Wierd...??????? PLease give some info...


My System SpecsSystem Spec
.
01 Sep 2014   #2
MrNeeds

Windows 7 Ultimate x64 SP1
 
 

The resolution you have set for your TV is higher than 720p but lower than 1080p, however there is no middle ground with TV's, it's either one or the other, so it reports as 1080p.
My System SpecsSystem Spec
Reply

 Resoulution detected by monitor wrong




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows setting wrong monitor as No.1 Monitor.
So this is my problem, I upgraded to Windows 8.1 pro the other day, and when I was installing all my old software I was going to record with OBS (stream software) but my monitors seem to be mixed around and OBS is only going to record programs No.1 not No.2 Here are screen shots. ...
Hardware & Devices
Second monitor not detected
I am attempting to add a second monitor to my hardware setup in Win 7. Both graphics cards are identified in device manager, but the only monitor that is detected is the one attached to the graphics card I designate as primary in the bios and is designated as generic plug and play. The other...
Graphic Cards
Dual monitor setup - fullscreen goes on wrong monitor
First of all, hello! And thanks for your time! I am running a dual monitor setup with my TV hooked up via HDMI to my laptop. Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV. Since a couple of days, as...
Graphic Cards
wrong primary monitor in dual monitor setup
Have a large screen tv on wall connected with HDMI to computer. Have a Samsung monitor on my desktop. Cannot make the desktop my primary monitor no matter what I do. (although have had this working before). We had a break-in and monitor was stolen. So replaced with new but cannot make it...
General Discussion
Monitor not being detected
I am using a DVI-E port and I am using a VGA to DVI-E adapter with my monitor and I try enabling the monitor but it is not being detected so it dosen't enable it. It detects the DVI port but not the monitor.
Graphic Cards
monitor cannot be detected
windows 7 cannot detect my LCD monitor (benq fp202w wide screen 1860x1050) nor cannot install the cd driver for this monitor. thus i didn't get the native resolution 1860x1050. please help me. :cry: my comp spec is as follows: windows 7 rtm 16385 32bit. amd athlon x2 dual core, gigabyte...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App