Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Checkered Pattern After Boot up

02 Sep 2014   #21
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Kobe, do you have Lucid Logix MVP available in your BIOS? If you do, disable it. Uninstall the Intel on board Graphics drivers. Unless you have enabled LL MVP, when you have a PCIe card in the X16 slot, the on board graphics are disabled automatically by the BIOS. Are you comfortable using the BIOS? Look at your sata controller and see what it is set to. With a SSD, you should be in AHCI mode. But do not change it, just look and see what it is set to. Also check your Ram timings frequency and voltage, make sure they are set to manufacturer's specs. Now, go into bios and set optimized defaults, you will be asked for conformation, answer yes. Now, go back and set your ram to manufacturer's specs, set you sata controller to what it is right now (this is important. If you change it from what it is right now, you will not be able to boot into Windows), set your boot order and save and exit.

Go into the OS. I believe you said you have a driver downloaded already. If so, uninstall your Intel graphics and your AMD graphics driver and reboot as it will ask you to. Next (and download it before you start this) follow these instructions to clean up all left over drivers Drivers - Clean Left over Files after Uninstalling . Now install your new drivers, but when you do, select custom install, and only install the graphics driver if you can. Only install what they make you install. You do not need the audio/HDMI driver. You have those installed already from your motherboard drivers. This should give you as clean an install as possible and not add other drivers which can conflict with your Mobo drivers and are not needed anyway.

If you get a bsod or anything else please run Blue Screen of Death (BSOD) Posting Instructions and upload the zip folder it creates, using this method
Screenshots and Files - Upload and Post in Seven Forums

See if that helps you any.

EDIT: If you have the drivers for Lucid Logix MVP installed, remove them also.


My System SpecsSystem Spec
.
04 Sep 2014   #22
kobe1976

Windows 7 Ultimate x64
 
 

I decided to buy a new video card today to see if that would work and it did so all is good now. Thank you for all the help guys
My System SpecsSystem Spec
04 Sep 2014   #23
Gornot

Windows 7 Home Premium x64
 
 

You're welcome, mate. I hope the issues don't come back.
My System SpecsSystem Spec
.

04 Sep 2014   #24
maxie

windows 7 home 64bit
 
 

Great news glad we could help
My System SpecsSystem Spec
Reply

 Checkered Pattern After Boot up




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
various BSODs, not much of a pattern
Hi, I have problems with BSODs on my PC, including page_fault_in_nonpaged_area, driver_irql_not_less_or_equal, system_service_exception, system_thread_exception_not_handled. They seem to be somewhat random except *maybe* occurring more often during gaming (although that might just be me noticing it...
BSOD Help and Support
Red-Checkered design appearing on screen for Windows 7, why?
On several occasions now I've had a red-checkered design appear on my screen, either on the top & bottom borders of the screen, or covering the screen entirely. I took the opportunity to take a screenshot on the last occurrence but the image only captured fragments of what I could actually see....
General Discussion
BSOD without an exact pattern
Hi, I have BSOD problems. I have not made hardware nor software changes. I tried to remove the nvidia graphics driver, as I have seen that it is a common failure. But the BSOD still appears. I send you the instruction files, The computer is an Intel Quad Q6600, motherboard Asus P5K-SE, Windows...
BSOD Help and Support
Getting quite a lot of BSOD's - Can't see a pattern
Hi all, as per title I am suffering from quite a lot of BSOD incidents, I have attached the required logs/reports. Computer is a Acer Extensa 5620 Laptop with Core 2 Duo proc and 3GB RAM, approx 4 years old. Win 7 Ultimate x64 Retail. With my limited understandng I noticed that a software called...
BSOD Help and Support
0x107 after 0xA, no pattern tho
i can usually figure out things with google.. but this one is a hard bone.. i got an IRQ bsod this afternoon while playing brink.. i tho it was maybe the psu.. i got a RBR1000-M and this psu has many pci-ex cables.. but only some carry 20A and the other carry 30A (i think so) my gpu needs 24A so...
BSOD Help and Support
Win 7 crashes - pattern
Hi All, I have a problem with crashes in my Win 7 PRof x64 edition; all crashes that I get relate to the following: Kernel-Power event ID 41 category ID (63) - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-Kernel-Power"...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:22.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App