Cannot get monitor to display at native resolution


  1. cokewithvanilla
    Posts : 69
    Windows 7 Ult x64
       New #1

    Cannot get monitor to display at native resolution


    Hello, i Have an LG E2340. I just removed this from someones computer to install 4 monitors. It was running at 1920x1080. I am running it as a fifth monitor on my computer. I have intel hd 4000 onboard graphics. I also have three displaylink usb > dvi.

    if I plug this in as the ONLY monitor to my docking station under intel graphics, I can get 1920x920 by creating a custom resolution... any more says it exceeds the bandwidth.

    If i plug it into the displaylink, i get 1680x1050.. which is the max resolution this thing can push.

    So, displaylink adapter isnt an option. How do I get the intel hd to do what its supposed to??
      My Computer
    Quote Quote

  3. HarriePateman
    Posts : 3,904
    Windows 7 Ultimate 64-bit
       New #2

    Intel claims their HD 4000 can support 3 simultaneous outputs, that's only possible when using 2 pixel clocks. This is because they only included 2 pixel clocks in the chip-set. Display Port can support the sharing of pixel clocks, otherwise you're going to have to supply matching displays for the setup.
      My Computer
    Quote Quote

  4. cokewithvanilla
    Posts : 69
    Windows 7 Ult x64
    Thread Starter
       New #3

    This happens with only one monitor connected
      My Computer
    Quote Quote

  6. HarriePateman
    Posts : 3,904
    Windows 7 Ultimate 64-bit
       New #4

    Try auto adjust on the monitor :)
      My Computer
    Quote Quote

 

  Related Discussions
Hello everyone, As you can see from the title, my display is shaking when set on monitors native resolution (1680x1050, 60Hz, analog), but when I downgrade resolution to the first lower one (1440x900, 60Hz), everything is ok. I have only the 60Hz option for refresh rate, and I installed the...
Hello. I just bought a used 22" display from someone I know. (He was using Unbutu or something so he can't help me.) I wanted to add this new screen to my other samsung syncMaster 226 to make a dual screen. The problem was, I couldn't choose the right resolution. I only had 4:3 resolution...
look.. I bought 1 Samsung LCD TV 37" and i use it as a pc monitor, when i go in "change resolution" have this: 1920x1080 (recomended), but when i select this resolution appear this in TV: "Function not available. This resolution isnt supported on this TV, change the resolution" but i look in...
Just re-installed my Windows 7 on my laptop because it was having issues. Now, my monitor fails to send it's correct maximum screen resolution of 1920 x 1080, but rather sends 1024 x 768 thus that's what Windows recognizes. I believe the issue is with the EDID, because I have installed different...
I have Windows 7 Home Premium 64 bit and an ATI Radeon HD 3450 256MB . The video card is hooked up to a Sharp Aquos LC-32GP3U via a Dvi to Hdmi adpater . After installing Win 7 I cannot get the display to read 1920x1080 resolution . The control panel shows it in 1920x1080 , but the display has...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 08:30.
Find Us