Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Display shuts off, lost signal, widows freezes, tower stays running.

11 Oct 2014   #31
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 


Yes that HW Info is good although it has been known for it to read incorrectvoltages but not whenever I have used it.

The features I like are the running info and then being able to open outeach component with such in depth detail.

Now I have just stumbled over something while looking at your system specs again and I see you are using an AV called Advanced Systemcare Ultimate 7 now I looked it up because I am not familiar with it and low and behold it is an Iobit program. Now I am getting very strong vibes as to your problems might be coming from that direction as Iobits is thought by many to be suspect software and the one tie I tried it I ended up doing a system reinstall to get rid of it. That is before I got a little more into it and found other ways.
Now it is your decision but if it were me I would be dumping that software or at very least disabling it again as I said I am not familiar with that particular program, but Iobits I personally not have anywhere near my machines.
If you want a good AV then there are plenty of free ones around and even the paid for ones are not really that expensive my Kaspersky for example costs $0.13 a day but that is at full price and one can get deals on any off them. But take a look at these
Probably the Best Free Security List in the World - Part I < page 2 and I keep this site as a good reference link too for all sorts of stuff




My System SpecsSystem Spec
.
11 Oct 2014   #32
Atemup

Windows 7 home premium 64 bit
 
 

It was recommended to me by my IT guy at work. I uninstalled it prior to running the malware scans.
My System SpecsSystem Spec
11 Oct 2014   #33
Atemup

Windows 7 home premium 64 bit
 
 

I'll still let a professional take a look but without any malware detected I'm back to thinking it could be psu or driver issues, what do you think?
My System SpecsSystem Spec
.

11 Oct 2014   #34
Atemup

Windows 7 home premium 64 bit
 
 

Will HWiNFO record my pc during display lost and force shut down? If I could see exactly what's going on during this it might explain something.....
My System SpecsSystem Spec
12 Oct 2014   #35
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Well it could still be a PSU problem even though the volts came up ok but who knows what is going on?

The HW Info recording what is going on when the shut down is on I ma not quite sure what you mean but if you mean does it still run without a screen I don't see why not.

Perhaps a look at the event viewer might throw up some insights into what th dickens is going on.

Type Event viewer in the Start window and it should throw up Event Viewer in a blue box at the top run it and scroll through and look what has been going on.

Scroll down in each section see pic


Attached Thumbnails
Display shuts off, lost signal, widows freezes, tower stays running.-ev-1.png  
My System SpecsSystem Spec
12 Oct 2014   #36
Atemup

Windows 7 home premium 64 bit
 
 

After the screen shuts down I can only bring it back with a force shut down, and when I bring windows back up the H.W. info has reset the information on it. I was just wondering if there is a similar program that would store the info so I can go back and look at it?...
My System SpecsSystem Spec
12 Oct 2014   #37
Atemup

Windows 7 home premium 64 bit
 
 

I'll try event viewer
My System SpecsSystem Spec
12 Oct 2014   #38
Atemup

Windows 7 home premium 64 bit
 
 

I Event Viewer I found this:

Cryptographic Services failed while processing the OnIdentity0 call in System Writer Object.

Details:
AddCoreCsiFiles : GetNextFileMapContent() failed.

System Error:
The parameter is incorrect.
My System SpecsSystem Spec
13 Oct 2014   #39
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok mate will have to have a dig around this one as it is not familiar to me. Just hang in there.

NB Ok found this can you go through this and see what it reads? A snip of the readout would be good http://www.vistax64.com/tutorials/14...ool-vista.html

I have had a look in my own registry and that is how it should look just one thing before you do anything in the registry back it up I do after every clean install and before I make any slight changes that even I know are safe.
Registry - Backup and Restore ( I make two copies - OCD)
My System SpecsSystem Spec
26 Oct 2014   #40
Atemup

Windows 7 home premium 64 bit
 
 

Reinstalled windows from disk and swapped graphic cards and the issue still persist. I'm now thinking its a bad motherboard.
My System SpecsSystem Spec
Reply

 Display shuts off, lost signal, widows freezes, tower stays running.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows shuts down, Computer stays on
My Issue: I shut down windows 7, and it seems to, but the computer fans / lights / drives /Ram all still have power. I've read through the posts and it seems there were some interesting ideas back in 09 on how to fix it, I tried searching my power options and making sure everything was set...
General Discussion
Display sleeps, but Tower stays on -- Why?
So in my BIOS the setting is at S3. So this is what happened....about 4-5 months ago there was a Windows Update and on the update was an (I had never seen this before) Nvidia graphics card update as well, I didn't think much of it so I just updated the Important Updates as usual. At some...
General Discussion
Windows shuts down but power stays on
Hello everyone, I'm have an issue with my recently built PC (recent as in built 3 days ago). I have a brand new copy of Windows that was freshly installed and once the installation completes and I enter Windows desktop before I even install any drivers or programs if I try to shutdown the PC...
General Discussion
Computer POSTs but only stays on for a few seconds then shuts off
Hello, I feel I should mention that this build previously didn't POST, but I took a look at the processor and saw it had a few bent pins. I tried to straighten them out as best I could, refitted the processor (this took a little bit of persuasion). Now my computer POSTS, gets past the...
PC Custom Builds and Overclocking
PC freezes and shuts down after 30mins of running.
I got a PC built from Canada computers last week and after I installed windows, I started getting problems. I don't know what the problem is. Could it be a software issue or hardware issue. I used a program called RemoveWAT, can that be the issue? Please help!!
General Discussion
Video signal lost and pc shuts down on Win 7 64 bit with NVIDIA GT 320
In the last few days I have experienced a serious problem that is preventing me to use my desktop pc. The computer is an Acer Aspire AX3900 running Windows 7 64 bit with Intel i5 processor, 6 Gb RAM and NVIDIA GT 320 graphic card. This is what has been happening: when I boot the pc, both in...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App