Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: PC games lag and Graphic's card not seen by PC

06 Dec 2015   #21
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Please post your exact model i can only find versions with I7 processors, which only come with 1 type of graphics.

Roy


My System SpecsSystem Spec
.
06 Dec 2015   #22
mesmerrow

Windows 7 Home Premium 64bit.
 
 

Quote   Quote: Originally Posted by torchwood View Post
Please post your exact model i can only find versions with I7 processors, which only come with 1 type of graphics.

Roy
CPU
Intel Core i5 2320
Cores 4
Threads 4
Name Intel Core i5 2320
Code Name Sandy Bridge
Package Socket 1155 LGA
Technology 32nm
Specification Intel Core i5-2320 CPU @ 3.00GHz
Family 6
Extended Family 6
Model A
Extended Model 2A
Stepping 7
Revision D2
Instructions MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64, NX, VMX, AVX
Virtualization Supported, Enabled
Hyperthreading Supported, Disabled
Fan Speed 1229 RPM
Bus Speed 99,8 MHz
Stock Core Speed 3000 MHz
Stock Bus Speed 100 MHz
Average Temperature 29 C
Caches
L1 Data Cache Size 4 x 32 KBytes
L1 Instructions Cache Size 4 x 32 KBytes
L2 Unified Cache Size 4 x 256 KBytes
L3 Unified Cache Size 6144 KBytes


If this is not what you asked for then please be a bit more specific.

Thanks.
My System SpecsSystem Spec
06 Dec 2015   #23
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Mines an ACER >>>6930<<< whats yours.

Roy
My System SpecsSystem Spec
.

06 Dec 2015   #24
mesmerrow

Windows 7 Home Premium 64bit.
 
 

Quote   Quote: Originally Posted by torchwood View Post
Mines an ACER >>>6930<<< whats yours.

Roy
Acer Predator G3620 <if that helps ?
My System SpecsSystem Spec
06 Dec 2015   #25
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Have a look at this topic,
Fix - Catalyst Control Center - CCC - will not open/install

After reviewing I noticed that you have Norton recovery set up, can you get a back-up from that?
you also stated in your first post that your system is gradually getting slower and slower over the last couple of weeks, It just might be that the card has just died.

Roy
My System SpecsSystem Spec
07 Dec 2015   #26
mesmerrow

Windows 7 Home Premium 64bit.
 
 

Quote   Quote: Originally Posted by torchwood View Post
Have a look at this topic,
Fix - Catalyst Control Center - CCC - will not open/install

After reviewing I noticed that you have Norton recovery set up, can you get a back-up from that?
you also stated in your first post that your system is gradually getting slower and slower over the last couple of weeks, It just might be that the card has just died.

Roy
Just re-read my own comment and i never stated my pc was getting slower at all.

It didn't work because there is no "90ba9c70f846762e" tokens under windows>assembly.
However there are multiple tokens that says AMD, just non of them have the following combination of "90ba9c70f846762e"
My System SpecsSystem Spec
09 Dec 2015   #27
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Hello mate now if I have it right you have installed a GPU? now perhaps I am not looking at the specs right but I cannot make out a GPU so can you run this please
Using HW Info
PART A:
You can test the volts on the PSU with HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT is a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
ATX Minimum Specs:

3.3v Rail (Min: 3.14v Max: 3.47v)

5v Rail (Min: 4.75v Max: 5.25v)

12v Rail (Min: 11.4v Max: 12.6v)
See this for the rail voltage info
Power Supply 101: A Reference Of Specifications - Power Supplies (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.

So run Part A: first to get a look at that PSU and then PART B: to find the GPU model

To send pics see this How to Use the Snipping Tool in Vista - it says Vista but works ok in 7 I want to see pics like mine


Attached Thumbnails
PC games lag and Graphic's card not seen by PC-hw-info-desktop-psu.png   PC games lag and Graphic's card not seen by PC-hw-graphics.png  
My System SpecsSystem Spec
09 Dec 2015   #28
mesmerrow

Windows 7 Home Premium 64bit.
 
 

Quote   Quote: Originally Posted by ICIT2LOL View Post
Hello mate now if I have it right you have installed a GPU? now perhaps I am not looking at the specs right but I cannot make out a GPU so can you run this please
Using HW Info
PART A:
You can test the volts on the PSU with HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT is a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
ATX Minimum Specs:

3.3v Rail (Min: 3.14v Max: 3.47v)

5v Rail (Min: 4.75v Max: 5.25v)

12v Rail (Min: 11.4v Max: 12.6v)
See this for the rail voltage info
Power Supply 101: A Reference Of Specifications - Power Supplies (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.

So run Part A: first to get a look at that PSU and then PART B: to find the GPU model

To send pics see this How to Use the Snipping Tool in Vista - it says Vista but works ok in 7 I want to see pics like mine
I am sorry but you are expecting too much from me,
the information you seek is beyond my skills and even with your explanation i still can't do it,
the screenshots you sent me are only confusing me since they of course do not show the exact same thing i see.
My System SpecsSystem Spec
10 Dec 2015   #29
BorisTheAnimal

Windows 7 Home Premium
 
 

Quote   Quote: Originally Posted by mesmerrow View Post
Quote   Quote: Originally Posted by ICIT2LOL View Post
Hello mate now if I have it right you have installed a GPU? now perhaps I am not looking at the specs right but I cannot make out a GPU so can you run this please
Using HW Info
PART A:
You can test the volts on the PSU with HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT is a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
ATX Minimum Specs:

3.3v Rail (Min: 3.14v Max: 3.47v)

5v Rail (Min: 4.75v Max: 5.25v)

12v Rail (Min: 11.4v Max: 12.6v)
See this for the rail voltage info
Power Supply 101: A Reference Of Specifications - Power Supplies (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.

So run Part A: first to get a look at that PSU and then PART B: to find the GPU model

To send pics see this How to Use the Snipping Tool in Vista - it says Vista but works ok in 7 I want to see pics like mine
I am sorry but you are expecting too much from me,
the information you seek is beyond my skills and even with your explanation i still can't do it,
the screenshots you sent me are only confusing me since they of course do not show the exact same thing i see.
I guess there might be a more simple way:
  1. Press the Windows key.
  2. Type in dxdiag.exe
  3. Press enter.
  4. On the first screen that you see there will be information about your computer like RAM and processor model, please click the button "Next Page".
  5. Take a screenshot of that page and post it back here.
  6. Use this tutorial on how to get the screenshot - How to Use the Snipping Tool in Vista


Kind regards


/Boris
My System SpecsSystem Spec
10 Dec 2015   #30
derekimo

Microsoft Community Contributor Award Recipient

 
 

I would bet this,

Quote   Quote: Originally Posted by mesmerrow View Post
I didn't change anything that day but updated the Display Adapters using Driver Booster 3 shortly before shutting down the pc.
Caused this,

Quote   Quote: Originally Posted by mesmerrow View Post
PS: Under device manager it now only sees my Intel HD graphics and have completely ignored/forgotten about my AMD Radeon. (can't even run AMD Catalyst anymore for some reason unknown to me.)

Thanks in advance.
And possibly other problems.
My System SpecsSystem Spec
Reply

 PC games lag and Graphic's card not seen by PC




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Graphic card frame freezes on certain games
While playing League of Legends or Smite i've been getting some frame freezes every 3-5 minutes. If I open Diablo, or any other game I don't have any of these problems though. I never had this problem before, and this has just come up after i reformatted my computer to get my OS on my SSD and...
Graphic Cards
My graphic card isn't functioning properly, games/videos won't load
I've been having this problem for a while now, and I stopped using my Windows desktop and started using my Chromebook instead. I just got back into using my desktop again, and I restarted it factory fresh. After installing all possible Windows updates, installing the latest graphics drivers, and...
Graphic Cards
GFX card drivers crash when playing graphic intensive games
About 7 months ago, i had to RMA a graphics card cause it kept causing BSOD's. The graphics card I had received from EVGA seemed to be dead on arrival so I RMA'd that one as well. The next one(my current graphics card) worked for about 6 months. About a couple days ago it started to get intense...
BSOD Help and Support
graphic driver can't detect graphic card
Hi, i'm running window 7 32-bit OS. My graphic card is (ATI Radeon HD 3200 Graphics) My problem is that after i went to www.amd.com, downloaded,uninstall the old catalyst and installed a new catalyst which matches my OS and yet i got this message whenever i tried to run that catalyst. "No AMD...
Drivers
Graphic card isn't found. Only finds my integrated graphic card. Help!
First of all: I don't know too much about computers, so use easy language please. I have sent in my computer to get repaired and got it back yestersay. Since then i've been trying to get it to work properly again. I can't play any of the games I used to play before I sent it in to get...
Graphic Cards
Need help for Graphic card ang on games
Hi, I have a Gigabyte G31 motherboard with Core 2 Duo 2.93 GHz, 2GB Ram, OS- Windows 7 Ultimate 32 bit. I am looking to buy a graphic card (not so expensive), which can play COD 4 , Crysis, Far Cry etc... games like this. Please help.... Also, when i run COD2 on my present system ,...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App