Multiple Video Cards - monitors not retaining settings


  1. Posts : 10
    Windows 7 Home Premium 64
       #1

    Multiple Video Cards - monitors not retaining settings


    Specifications:
    i7 950
    X58 motherboard with four pci-express slots
    Three ATI 3650 Pci-Express video cards with a total of 6 DVI ports
    6GB memory
    500GB Hard Drive
    Windows 7 Home Premium 64 bit (purchased, not RC)
    3 Viewsonic 22" monitors and one Dell 24 inch monitor all running DVI cables.

    I have three of the video cards in the computer to run multiple monitors. Windows 7 has a feature where when you plug in a monitor, it auto detects it and then enables it and sets its proper screen resolution. The problem is that when I plug in more than one monitor, I get inconsistent results.

    Here are some examples:

    Example 1 that happens: I have two monitors plugged in and I plug in a third monitor. It enables it within Windows 7, but the monitor does not actually turn on. If I restart the computer, somtimes it will stay enabled and boot up with all three monitors on. sometimes when I reboot it, it again shows all three enabled but only two are actually on. This happens also when I plug a fourth or fifth monitor on. Sometimes two or three monitors will be on whereas one or two others will not be on but will show enabled in display properties.

    Example 2 that happens: Sometimes when I plug in a second, third, or fouth monitor, it will actually show an additional monitor as disabled. For example, if I have three monitors plugged in and it shows three monitors enabled (regardless if all three are on and working), and I plug a fourth monitor in, then it enables the fourth monitor, sometimes it turns on, sometimes it doesnt, and it also shows a "generic non-pnp monitor" as number FIVE. Even though only four displays are plugged in. I've seen this happen even if I plug in a third monitor (shows four, with 3 or number 4 disabled). If I try to enable that FIFTH "ghost" monitor, and click apply, it says "cannot save settings." You can see an example of this as an attachment. When I plugged in another monitor, it shrunk 2 and there is also a 5 the same size but disabled. Strangely enough, the 2 says the pnp monitor and 5 says the model number of the monitor. However, enabling 5 does not actually enable it and says that it cannot save settings.

    I have tried downloading the latest drivers from ATI 9-10 as well as Catalyst Control Center as well as Hydravision from ATI and also Ultramon multiple monitor software. I have tried deleting the ATI 3600 drivers WDDM 1.0 (maybe 1.1) from device manager, only to reboot and then it installed the drivers, reboot again and it brings back all of the whacky settings.

    I have a couple of times got all four monitors enabled and all four monitors on where the cursor moves across them properly. EXACTLY what I want to have happen. If I restart it almost always comes back on as EXAMPLE 1 where only two of the four monitors will turn on, but it shows them enabled in display properties, or if all four monitors do come back on, they are not in the same order that I had them in and it actually shows FIVE in display properties.

    To make this all even stranger, believe it or not, i've even had it boot and one of the monitors is BLACK & WHITE. What is so strange about this is that the Windows 7 logo when booting, the color Windows 7 logo, is indeed COLOR on that screen, but once it is actually in Windows 7, it is BLACK & WHITE. If I do a restart, it sometimes comes back in full color. What this means is that there is color while Windows is loading, and then once in Windows one of the monitors is BLACK & WHITE throwing out the possibility of a bad video card.

    Has anyone else experienced anything like this? Is there KNOWN issues with Windows 7 and ATI video cards or drivers? How about Windows 7 and Viewsonic or Dell monitors? This is extremely frustrating and looking for some guidance on the subject matter. I believe that the drivers, whether Windows WDDM default or ATI's are simply not correct with Windows 7. I never had this problem with Windows XP.

    PLEASE See "win7_monitors.jpg" file to see what I am talking about concerning EXAMPLE 2.

    Edit: I need to add that on example 1, where it shows enabled but the monitor does not come on, I have noticed that about 50% of the time when I put the Windows 7 into SLEEP mode, and take it out, the monitor(s) that were off are now on.
    Attached Thumbnails Attached Thumbnails Multiple Video Cards - monitors not retaining settings-win7_monitors.jpg  
    Last edited by Technet249; 14 Nov 2009 at 19:37.
      My Computer


  2. Posts : 4,280
    Windows 7 ultimate 64 bit / XP Home sp3
       #2

    Just curious. What make and model power supply are you using, and how many volts on the 12v rail(s). Fabe
      My Computer


  3. Posts : 10
    Windows 7 Home Premium 64
    Thread Starter
       #3

    Power supply is Thermaltake Toughpower 750W. I believe the +12V@60A, -12V@.8A
      My Computer


  4. Posts : 10
    Windows 7 Home Premium 64
    Thread Starter
       #4

    any comments or suggestions?
      My Computer


  5. Posts : 5,747
    7600.20510 x86
       #5

    Yeah, I'm almost sure I commented about this in another thread for you. If you're only running 4 monitors, you only need 2 video cards and not 3. Also, disable the onboard vga if the bios allows this. If not, disable it in the device manager.

    Take things from here and see how it goes.
      My Computer


  6. Posts : 10
    Windows 7 Home Premium 64
    Thread Starter
       #6

    torrentg said:
    Yeah, I'm almost sure I commented about this in another thread for you. If you're only running 4 monitors, you only need 2 video cards and not 3. Also, disable the onboard vga if the bios allows this. If not, disable it in the device manager.

    Take things from here and see how it goes.
    Doesnt matter, and I will eventually use 5 screens (within a week or two)
      My Computer


  7. Posts : 5,747
    7600.20510 x86
       #7

    Technet249 said:
    Doesnt matter, and I will eventually use 5 screens (within a week or two)
    So we have to troubleshoot something you're changing in a week or two?
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:06.
Find Us