Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 3 monitor dual card setup - Programs swap sides when HDMI powered on

08 May 2016   #1
SomeUserName

Windows 7 Ultimate 64Bit (SP1)
 
 
3 monitor dual card setup - Programs swap sides when HDMI powered on

Turning on HDMI 3rd monitor screws up the Display 1 & 2 which are VGA and DVI

I usually have Skype open and 2 browsers. Monitor 1 on DVI for work and monitor 2 is VGA for facebook Twitter and that kind of stuff and Skype under the browser on monitor 2 and monitor 3 is on a second/separate video card hooked up to HDMI used for music videos and cctv cameras.

As of lately when I turn on the HDMI monitor all the programs switch sides.

Skype will move from the lower right side of monitor 2 over to the lower right side f monitor 1
The browser thats on monitor 2 will switch over to monitor 1 and the browser that was on monitor 1 will swap sides from monitor 1 over to #2.

The 3rd monitor is sometimes used for music videos but currently it is hooked up to a CCTV DVR on the DVR VGA hookup so it even does this when the TV (Monitor 3) is not on HDMI mode for the computer.

I can turn monitors 1 and 2 on and off 1000 times and nothing will happen but as soon as I turn on the HDMI everything swaps sides.

Why would powering on HDMI display do this and how can I stop open programs from swapping sides on monitor 1 & 2 when I turn on the TV (Monitor 3) even if its not in HDMI mode when powered on?


My System SpecsSystem Spec
.
08 May 2016   #2
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

All your monitors should be hooked up to 1 card.

And no way should you be running an amd card and an nVidia card in the same box.

Get yourself 1 970, 980, 980 Ti or wait for the GTX 1080 or 1070 which will be out soon.

You should also consider getting a Core 2 Quad or Core 2 Extreme if your board will support one, they are all over Ebay, cheap.
My System SpecsSystem Spec
09 May 2016   #3
SomeUserName

Windows 7 Ultimate 64Bit (SP1)
 
 

On one card only 2 of 3 monitors work. All 3 will not work as per this thread Auto switch HD5570 card with VGA/DVI and HDTV on HDMI port

So I went out and got another card and it worked fine for months. This program switching side issue is only a few weeks old. It worked PERFECT before. Also to note when I switch on the HDMI the other two monitors go black and say no signal for a few seconds but then comes back on then the HDMI P.O.S.T/Welcome screen is completed. It has done that since day one but again this programs swapping sides is only a few weeks old. I haven't really installed any new programs and all I really use is Chrome, Skype, Windows picture view, Windows media player and sometimes VLC media player. I'm not a gamer trying to play across a 5 monitor setup. Each of my monitors serves its own individual purpose

If it worked fine before could this be another screwed up Windows update? I know one of microsofts favorite pastimes to screw up peoples machines with faulty updates and the reason I don't allow auto update. Could a bad update cause programs to swap on HDMI power on?
My System SpecsSystem Spec
.

09 May 2016   #4
BrassCat

Win 7 Pro 64 bit
 
 

Hello. I am running triple monitors. Samsung Syncmaster 204b. I have seen some issues in plugging in a third monitor. In my case, the monitor does not have to be powered up!. Evidently the DVI connection provides enough pwr?? to ID the monitor. That may not be true for you monitors, they may have to power up for the graphics card to sense there presence. Depending on where that monitor is in the hierarcy (like monitor 1,2,3) it will shift the others. My running monitors will go blank for a second or so when connecting a 3rd monitor live. Seems normal then. Shifting which monitor is the primary will blank the monitor for a bit. Your mileage may vary, but at least it gives you something to work with.

Stan
My System SpecsSystem Spec
09 May 2016   #5
alphaniner

Windows 7 Professional x64, Arch Linux
 
 

Unfortunately, you'll probably have to "retrace your steps" to figure out what caused it. IMO, GPU software/driver updates would be the place to start, but a Windows Update is certainly a possibility.
My System SpecsSystem Spec
21 May 2016   #6
SomeUserName

Windows 7 Ultimate 64Bit (SP1)
 
 

Last week there was a power outage and it fried the SOYO monitor when it came back on. I found a used Syncmaster 920WM w/ speakers (which is also a nice close match to my Syncmaster 941BW which has been my secondary display.)

Since getting the 920WM to replace the SOYO this program swapping sides behavior seems to have stopped. When powering on the HDMI TV the two computer monitors still go black for a few seconds but they have ALWAYS done that. Its the programs swapping sides that bugged me and it **seems** fixed now. At least it hasn't done it it almost a week now.
My System SpecsSystem Spec
Reply

 3 monitor dual card setup - Programs swap sides when HDMI powered on




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
PC Monitor Mount for Top&Bottom Dual Monitor Setup
The title says it all! I'm having troubles finding a PC monitor arm mount for a top & bottom dual pc setup. I don't suppose anyone here happens to have a top & bottom dual monitor setup that could point me in the right direction? The monitor mount would have to go high enough for the bottom of...
PC Custom Builds and Overclocking
Dual monitor setup hdmi to vga on 2nd monitor shows nothing
I have the 2nd setup through a vga to hdmi cable but it just sits there black with "check signal cable." 2nd monitor is an lg2241 Tried: - multiple re-boots - downloaded a driver from LG but don't see that it did any kind of install. Double clicking it's zip file opened it and clicking...
Hardware & Devices
Radeon HD 6670 Dual Monitor setup not detecting 2nd monitor
Hello I basically need conformation that I'll need to buy a new monitor in order to have a dual monitor set up with my current system. I'm not super tech savvy so if you need any other info please let me know. I have a Radeon HD 6670 with 3 ports, an HMID, VGA (which is my monitors type) and...
Graphic Cards
Dual monitor setup - fullscreen goes on wrong monitor
First of all, hello! And thanks for your time! I am running a dual monitor setup with my TV hooked up via HDMI to my laptop. Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV. Since a couple of days, as...
Graphic Cards
Radeon HD 6670 Dual Monitor setup not detecting 2nd monitor
I am having troubles getting my dual monitors back. Initially had a GeForce 8400GS 512MB PCI video card and was using the on board video (Biostar G41 M7 MB) for dual VGA monitor setup. I've installed a Radeon HD 6670 1GB PCI-E video card with monitor one setup via DVI to VGA adapter on output...
Graphic Cards
Dual Monitor Setup, 2nd Video Card always max'd
I have a dual monitor setup, which works great...the only "kinda" issue is that the 2nd vid card setup for the 2nd monitor is always max'd out. Nothing "runs" on that monitor that would need this type of power from the vid card. Anyone know why or how to throttle it back down to idle speeds? ...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:01.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App