Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Installed 750 ti oc , start up problems

13 May 2016   #1
ChrisPbass

7 Ultimate 64 bit
 
 
Installed 750 ti oc , start up problems

I just installed a geforce 750 TI OC onto an asus p6x58d premium when I boot up I get Express Gate which is some sort of OS that resides on the graphic card, I assume... you can browse etc.... If I exit out of the EG and go to the OS the OS crashes. I get to Startup Repair and I'm told that it can't be repaired. When I first installed the card and booted the PC acted like it couldn't find the OS&; I went into the bios and changed the boot order. It still boots to EG but it did TRY to boot to the OS.. So I leave EG and it goes back to the boot. IDs the OS drive, asks if I want repair or normal. Repair does not work, normal blue screens. I have not installed drivers.....the board was returned and all i got was the board. No cd halp1


My System SpecsSystem Spec
.
14 May 2016   #2
rvcjew

7 Pro x64, 10 Pro x64
 
 

Express Gate is a feature of the motherboard bios, disable it in there then try booting your OS again. What happens if you remove the new card and boot like it was before, does it load? What card was in it before?
My System SpecsSystem Spec
14 May 2016   #3
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi,
Yea I remember seeing pci-e in boot options I suppose if someone had a ssd.. expansion card there instead of a gpu it might be different ?
I'd optimize defaults and save and exit bios and see what happens.
My System SpecsSystem Spec
.

14 May 2016   #4
ChrisPbass

7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by rvcjew View Post
Express Gate is a feature of the motherboard bios, disable it in there then try booting your OS again. What happens if you remove the new card and boot like it was before, does it load? What card was in it before?
disabled. It won't boot. BIOS does not show the SSD/OS drive under hard drives but in boot priority it does show and when the PC boots it does show the drive.@D With EG disabled it does the same thing except I don't go into and then out of EG. The previous card was a HD5850. This board does not have integrated graphics. I guess I will put the old card back in and see what happens. Start up repair says it cannot find a problem and to remove and new cameras or music players that I may have attached. Safe mode blue screens as well.
My System SpecsSystem Spec
14 May 2016   #5
rvcjew

7 Pro x64, 10 Pro x64
 
 

First make a check to see if your sata mode is set to IDE and not AHCI (I bet it was AHCI and when you put in the new card it triggered a reset or something). Also try moving your ssd sata cable to the 3rd sata port as well. If it will not show up in the BIOS as existing you're having a conflict problem of some kind. Changing just your sata mode may fix your woes, depends on if the the OS was installed with it as IDE or AHCI.

If none of that works then try replacing your old card with same steps.
My System SpecsSystem Spec
14 May 2016   #6
ChrisPbass

7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by rvcjew View Post
First make a check to see if your sata mode is set to IDE and not AHCI (I bet it was AHCI and when you put in the new card it triggered a reset or something). Also try moving your ssd sata cable to the 3rd sata port as well. If it will not show up in the BIOS as existing you're having a conflict problem of some kind. Changing just your sata mode may fix your woes, depends on if the the OS was installed with it as IDE or AHCI.

If none of that works then try replacing your old card with same steps.
It was set to IDE. I changed it to AHCI and it tries to boot and It says Starting Windows and crashes It is not detecting the OS drive though in the BIOS (under Storage Config.). I don't get it....how could it even start the OS or do a repair if it didn't see the OS drive and why does it SHOW the OS drive when booting up but not in BIOS (under AHCI settings) The SSD is still shown as IDE under Boot Settings / HDDs I reset the BIOS to default and it asks for proper media. I guess I'll go back in the BIOS and point it to the SSD and trying unplugging/replugging, though I already did that once. OK. I unplugged all the sata and made sure the OS was in sata. Boot - No HD detected! Yeah right. Went into the bios SATA is AHCI AHCI config shows port 3 as HD Boot order was messed up. Put the SSD to 1, again. It boots, splash screen says pass through IDE mode and NO HD. But it boots???? I am now in the OS. I guess I will swap cards and make sure it's set to AHCI and the boot order is correct. HOW WHY does it say there is NO HD detected???
My System SpecsSystem Spec
Reply

 Installed 750 ti oc , start up problems




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Audio Device Not Installed / Cannot Start
I reformatted to windows 7 proffesional. I have a clean installation, no aftermarket sound cards. Just using on board sound. I tried installing drivers, made sure it wasn't disabled in device manager. nothing seems to be working.
Sound & Audio
start up repair failed !no os installed?
:cry: sup guys recently a friend of mine had dropped my laptop and now it wont boot up because everytime i try the start up repair would pop up but fail heres the problem details Problem signature problem event name startupRepairOffline Problem signature 01: 6.1.7600.16385 Problem signature...
General Discussion
Can't start up my computer. (Driver problems, BSOD, other problems)
Hi I hope I'm placing this in the right section, if not, then could someone tell me where to put it and I'll post it again. I've got a Samsung RV510 laptop with Windows 7 HP 64 bit. About 2 weeks ago, I was watching a Youtube video, had Spotify and Facebook open too, and my computer...
BSOD Help and Support
Word wont start, re-installed, still does not
The Microsoft office word on my system has stopped working. This is the message that pops up. http://tinyimage.net/images/38384044688950085868.jpg If I press yes, it just crashes. If I press no it does the same. The other office programs are working fine. So I uninstalled, cleaned ...
Microsoft Office
Internet problems after win7 re-installed
i have recently re-installed windows 7, and im now having troubles connecting to the internet. in the bottom right hand side of my screen where usually i see a connected symbol that looks kinda like ((((i))) if you know what i mean... where now i see a box with a pitchfork on the left side of it...
Network & Sharing
Having Problems...Just Installed 7
I have a Dell Studio 1535 and just installed Windows 7 x64 (had Vista x32). Each time I put a cd in to install a program, I have several problems. Here is the usual issue: 1. I take the last CD out and try putting the new one in. After it slides in, it pops back out each time I try it. 2. I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App