Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Out Of Range

18 Jan 2010   #1
djjamieg

Windows 7 Ultimate x64
 
 
Out Of Range

Right guys

My primary display works fine @ 1024x768 if I try to duplicate or extend to the 2nd they both go out of range.

However I can duplicate them @ 800x600 but no extend @ this resoulution.

I have the latest drivers from Nvidia site

Any ideas???


My System SpecsSystem Spec
.

18 Jan 2010   #2
Jonathan_King

Windows 7 Professional x64
 
 

How are you setting these display options? Are you using Screen Resolution from the right-click menu, or are you going into the nVidia control panel?

Also, what are you using as your secondary display?
My System SpecsSystem Spec
18 Jan 2010   #3
djjamieg

Windows 7 Ultimate x64
 
 

Both settings John but primarily the windows right click option.

There both Advent X19W's

Im off to bed any way

But will tackle it tommorrow and let you know

Regards :]
My System SpecsSystem Spec
.


18 Jan 2010   #4
computersplus

Windows 7 Ultimate 32 bit
 
 

what are you using for a power supply to power this system it's not listed in your specs.....why do so many people overlook the power supply like it's not important?
My System SpecsSystem Spec
19 Jan 2010   #5
djjamieg

Windows 7 Ultimate x64
 
 

The thing is I had the setup working before on the same PSU.

I just had to upgrade my graphics card to the one listed in my Specs.

I did a clean install of 7 because I put xp on which knocks the bootloader out, so I'm just curious why I cannot get back to my previous setup.
My System SpecsSystem Spec
19 Jan 2010   #6
Jonathan_King

Windows 7 Professional x64
 
 

Have you tried using other drivers? Try the last drivers, not the most recent ones.
My System SpecsSystem Spec
19 Jan 2010   #7
computersplus

Windows 7 Ultimate 32 bit
 
 

you have a pretty good load there with that hardware if you already have a power supply that's been barely enough to power this system it could be showing signs of failure with the symptom you describe which to me sounds like lack of power if you could post the spec on that or a model number I will check it out
My System SpecsSystem Spec
19 Jan 2010   #8
djjamieg

Windows 7 Ultimate x64
 
 

Its a 350w I do have a 400w PSU so will try that and let you know what happens
My System SpecsSystem Spec
19 Jan 2010   #9
computersplus

Windows 7 Ultimate 32 bit
 
 

need I say more your power supply is not enough watts is not everything either these cards draw a lot of Amps you need a minimum of about a 550 watt power supply that can deliver about 40 amps on a single rail to power a system like that correctly
My System SpecsSystem Spec
19 Jan 2010   #10
djjamieg

Windows 7 Ultimate x64
 
 

The card itself says I need 450w, but having booted in Vista to test your power theory, there is no problem.

So it cant be the power supply, I did say that it couldn't be the PSU, surely if the there was not enough power the system wouldn't boot at all????
My System SpecsSystem Spec
Reply

 Out Of Range




Thread Tools





Similar help and support threads
Thread Forum
Why is this memory range on the PCI bus?
Why is the following memory address range on the PCI bus? The image is from Device Manager on Netbook that uses shared video memory with no dedicated video memory so I am unsure as to why the VGA memory range would be on the PCI bus. Wouldn't this range need to go to system memory which then...
Hardware & Devices
Ivy CPU temperature range...
This is more of a question than actual issue... First time around with the Ivy CPU (i5-3353P) with Zalman CNPS9500 heatsink, currently being bench tested. The processor is working just fine, albeit not noticably faster than the i5-760 CPU. The older processor had Noctua NH14 heatsink with...
Hardware & Devices
new build out of range :(
my last computer died,so i got one built today,nothing fancy,cheap and cheerful, when i brought it home and plugged it in,it went great,i never adjusted anything then i restarted and got the dreaded out of range:mad: i tryed safe mode and changing the resolution but when i restart:out of range i...
Graphic Cards
Monitor out of range
I have been using Vista Home Premium 32 bit with a main monitor 32"TV and a secondary monitor - a 17" LCD PC monitor. Having transferred to Windows 7 on a new PC the secondary monitor now shows "out of range" on its screen. Can anyone tell me why this has happened. It is in the same place as...
Hardware & Devices
JC2 out of range
People I just bought my POV GTX 465 and played Just cause 2 fine but after a few days when i played JC2 the screen turned black and says out of range Something/85hz but i can still hear the music and stuff Anyone help
Gaming
HDMI out of range
Computer is running Win 7 Enterprise (64-bit) I have a dual-monitor set up. My main monitor is a 25.5" Widescreen Westinghouse L2610NW. Im running it on HDMI 1920x1080p (32-bit color) 60hz (its native resolution is 1920x1200, but only if I use the VGA channel, which I am not.) My 2nd monitor is a...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App