Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't change my resolution...


01 Feb 2010   #1

windows 7 Ulltimate
 
 
Can't change my resolution...

I just finished installing a fresh windows 7 (ultimate), and now I can't seem to change my screen resolution. The default value is set to 800x600 and I can't get it to go any higher, it just flips back to the default value.
The screen is connected with a vga cable and all the drivers seem to be updated.
Before I upgraded everything was fine and dandy...

Does anyone have an idea about wha'ts going on?

Best regards...


My System SpecsSystem Spec
.

01 Feb 2010   #2

Vista Ult 64 bit Seven Ult RTM x64
 
 

Hello Hesso,

Welcome to Seven Forums.

What graphics card do you have? What monitor? Sure sounds like a driver issue. Is the card listed and showing as working in device manager?

Gary
My System SpecsSystem Spec
02 Feb 2010   #3

Windows 7 64-bit Ultimate
 
 

ATI or nVidia videocard?
Is your monitor recognised by Windows 7 or is it recognised as a Generic PNP Monitor or something familiar?
If so, changing drivers will probably not solve your problem because the monitors .inf file (or EDID file) used by Windows 7 is restricted to those resolutions you have now. Windows 7 will not use the monitors native info file but instead uses his own.
One way around is to create your own resolutions (with the Nvidia Control Panel, you are able to do that depending on the driver) and use these custom resolutions instead.
My System SpecsSystem Spec
.


02 Feb 2010   #4
Microsoft MVP

Windows 7 Ultimate 32bit SP1
 
 

While in 'screen resolution', click on advanced settings, then monitor. Is it set at color 32bit or 16bit?
My System SpecsSystem Spec
02 Feb 2010   #5

windows 7 Ulltimate
 
 

Hey everybody, thanx for your quick replies...
The problem with the resolution is no more...
The monitor was recognized by the system as a Generic PNP Monitor something something. What I did was looking over the drivers that was installed by the computer for the graphic card, in the devicemanager it said that the drivers were the best for the installed "standard vga graphic card". It just didnīt seem right so, as the computer does not belong to me but my parents, I was not sure of the model. i opened up the computer to find that it was an integrated graphic card. Then I updatded the card from the device manager with the software from the motherboard disc. Voila... It worked.

So basically, what it came down to was that I in fact did not have the apropriate drivers installed for the graphic card...

Thanks again everybody.
My System SpecsSystem Spec
02 Feb 2010   #6

Windows 7 Ultimate (32 bit)
 
 

Quote   Quote: Originally Posted by hesso25 View Post
Hey everybody, thanx for your quick replies...
The problem with the resolution is no more...
The monitor was recognized by the system as a Generic PNP Monitor something something. What I did was looking over the drivers that was installed by the computer for the graphic card, in the devicemanager it said that the drivers were the best for the installed "standard vga graphic card". It just didnīt seem right so, as the computer does not belong to me but my parents, I was not sure of the model. i opened up the computer to find that it was an integrated graphic card. Then I updatded the card from the device manager with the software from the motherboard disc. Voila... It worked.

So basically, what it came down to was that I in fact did not have the apropriate drivers installed for the graphic card...

Thanks again everybody.

Give yourself some REP points for solving the problem.
My System SpecsSystem Spec
02 Feb 2010   #7

win7
 
 

I have almost the same problem. Nvidia graphics card with updated drivers. A LG W2252TQ monitor that lacks drivers for Windows 7. I want to set the resolution to 1680*1050 (which is suported by the monitor) but it is not recognized as that neither from the Nvidia Control panel or Windows "change resolution settings". The monitor is recognised as "generic non PnP monitor". It's connected with just a basic VGA cable)

I've tried to make a costum setting from the nVidia control panel, but since it's a duplicate of an existing setting, it doesn't seem to work. If I change scan type to interlaced (from progressive) I get a message that this resolution isn'nt supported by my monitor. Even though I know that it is!?
My System SpecsSystem Spec
03 Feb 2010   #8

Windows 7 64-bit Ultimate
 
 

Check this threath: http://www.sevenforums.com/graphic-c...esolution.html
There are some links in there to possible solutions.
My System SpecsSystem Spec
03 Feb 2010   #9

win7
 
 

Thanks Lange. Seems to be enough possible solutions there to keep me busy for weeks. And hopefully also find a solution...
My System SpecsSystem Spec
03 Feb 2010   #10

Windows 7 64-bit Ultimate
 
 

Took me quite a while to figure it out too but check the Tom's Hardware link in there to start.
(Screen resolution on windows 7, no 1680x1050? - windows-7)
My System SpecsSystem Spec
Reply

 Can't change my resolution...




Thread Tools



Similar help and support threads for2: Can't change my resolution...
Thread Forum
How to change the monitor resolution to a custom resolution Graphic Cards
Is there ANY possible way to change a wallpaper's resolution? Themes and Styles
I can't change my resolution from 800X600 Graphic Cards
resolution won't change. Graphic Cards
change resolution Graphic Cards
Resolution Change? Graphic Cards
Resolution change (Help) Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Đ Designer Media Ltd

All times are GMT -5. The time now is 03:27 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33