Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: HD Monitor unable to display resolution using DVI adapt

08 Feb 2010   #11

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE

it was so frustrating dealing with tech agents that didn't really quite know how to solve the problem.
That is the primary reason that I haunt forums such as this, because too often, when I tried to use a manufacturer's support in the past, it was a waste of time, and sometimes the computer was worse off after talking to them.

My System SpecsSystem Spec

 HD Monitor unable to display resolution using DVI adapt

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Cannot get monitor to display at native resolution
Hello, i Have an LG E2340. I just removed this from someones computer to install 4 monitors. It was running at 1920x1080. I am running it as a fifth monitor on my computer. I have intel hd 4000 onboard graphics. I also have three displaylink usb > dvi. if I plug this in as the ONLY monitor to ...
Graphic Cards
Cannot Get Monitor To Display Correct Resolution! Help!
Hello, My big old bulky tube monitor died recently, so I picked up al LCD flat planel HP monitor from Best Buy. When I hooked it up and turned it on my monitor displayed a message "Current Settings: 1280 x 1024, Recommended Settings: 1600 x 900". I noticed right away that the picture on my...
Graphic Cards
Monitor wont display correct resolution
After connecting my new hdmi cable the resolution has been off. It's currently at 1920 x 1080 but is slightly too large for my monitor. Its cutting all the icons pinned to the task bar in half. When I try to customize the resolution in the NVIDIA Control Panel it says the custom resolution is not...
Graphic Cards
Can't get monitor to display same resolution between 2 workspaces
Hi all, My apologies, this is a cross post, but I am not getting anything for help really at the other post source. I'm hoping I can churn up a few more helpful eyes and brains here.... Original thread: Can't get monitor to display same resolution between 2 workspaces - Microsoft Community ...
Graphic Cards
resolution issues for second monitor/display
Hello, I bought a new toshiba notebook w/ I3 and all the goodies, (I think) I plugged in a hdmi cable and started setting up my 42 inch tv as a second monitor.. but i was having issues with changing the resolution of that monitor/TV...The monitor/tv had the black bars, but each time i...
Graphic Cards
Monitor will only display one resolution correctly'
Windows 7 installed without any problems, and found all the hardware devices, but the only problem I have is that the monitor will only dislplay at 1920x1080. If you lower it , the monitor will not display a full screen. Tried all resolutions, and have the latest 191 drivers. Any ideas.. :p
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:59.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App