Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Trying to Solve problem

13 Feb 2010   #1

Windows 7 x64bit
 
 
Trying to Solve problem

I am trying to solve my problem, i posted awhile back about my 5850 not performing to my standards and it always saying driver failed to respond and has recovered, Well now it has been just crashing a lot more with the different colored lines running vertical and stays on that screen. I ran prime 95 for 6 minutes and this is the outcome of worker #1
[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #0
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:37] Hardware failure detected, consult stress.txt file.
[Feb 13 11:37] Torture Test completed 2 tests in 4 minutes - 1 errors, 0 warnings.
[Feb 13 11:37] Worker stopped.



[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #2
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:38] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Feb 13 11:39] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Feb 13 11:39] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:39] Hardware failure detected, consult stress.txt file.
[Feb 13 11:39] Torture Test completed 4 tests in 5 minutes - 1 errors, 0 warnings.
[Feb 13 11:39] Worker stopped.


[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #3
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:38] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Feb 13 11:39] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Feb 13 11:39] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:39] Hardware failure detected, consult stress.txt file.
[Feb 13 11:39] Torture Test completed 4 tests in 5 minutes - 1 errors, 0 warnings.
[Feb 13 11:39] Worker stopped.


If i knew what this meant i wouldnt post here, so i am just curious to what you guys think. I have nothing overclocked





But worker #2 continued and continued

My System SpecsSystem Spec
.

13 Feb 2010   #2

win7 ultimate / virtual box
 
 

Quote   Quote: Originally Posted by Garhardy View Post
I am trying to solve my problem, i posted awhile back about my 5850 not performing to my standards and it always saying driver failed to respond and has recovered, Well now it has been just crashing a lot more with the different colored lines running vertical and stays on that screen. I ran prime 95 for 6 minutes and this is the outcome of worker #1
[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #0
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:37] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:37] Hardware failure detected, consult stress.txt file.
[Feb 13 11:37] Torture Test completed 2 tests in 4 minutes - 1 errors, 0 warnings.
[Feb 13 11:37] Worker stopped.



[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #2
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:38] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Feb 13 11:39] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Feb 13 11:39] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:39] Hardware failure detected, consult stress.txt file.
[Feb 13 11:39] Torture Test completed 4 tests in 5 minutes - 1 errors, 0 warnings.
[Feb 13 11:39] Worker stopped.


[Feb 13 11:33] Worker starting
[Feb 13 11:33] Setting affinity to run worker on logical CPU #3
[Feb 13 11:33] Beginning a continuous self-test to check your computer.
[Feb 13 11:33] Please read stress.txt. Choose Test/Stop to end this test.
[Feb 13 11:33] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Feb 13 11:35] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Feb 13 11:36] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Feb 13 11:38] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Feb 13 11:39] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Feb 13 11:39] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Feb 13 11:39] Hardware failure detected, consult stress.txt file.
[Feb 13 11:39] Torture Test completed 4 tests in 5 minutes - 1 errors, 0 warnings.
[Feb 13 11:39] Worker stopped.


If i knew what this meant i wouldnt post here, so i am just curious to what you guys think. I have nothing overclocked





But worker #2 continued and continued
the fact you have errors all within six minutes means something is definately not happy at a hardware level, all of your symptoms point towards graphics card or ram .....

I would want to make a calculation by checking my PSU minimum requirements here and don't forget you need 30-40% headroom

I would then want to look at my ram requirements and check them against the voltages and timings your motherboard is supposed to supply and then against the actual settings stated in the bios ?

Looking at your system spec it looks like your running two graphics cards , if that's true then try running with one card and one stick of ram to see if you get the crash ?

If you don't then work your way back up in ram first
My System SpecsSystem Spec
13 Feb 2010   #3

windows 7 64 bit premium
 
 

I think maybe its time for a new gpu,nvidia maybe .
My System SpecsSystem Spec
.


13 Feb 2010   #4

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Quote   Quote: Originally Posted by Garhardy View Post
If i knew what this meant i wouldnt post here, so i am just curious to what you guys think. I have nothing overclocked
But worker #2 continued and continued
Take a look at this tutorial. Lots of good info on using Prime95 Stress Test:
Torture test your CPU with Prime95
and
Prime95 - Wikipedia, the free encyclopedia

One test does not make a pattern. Run the test again to see if it repeats.
If it does I would look at cooling first: remove the case cover(s) and run it that way. You could even blow a house fan towards the case or set it up in a freezing cold room.
The next logical test would be Memtest86+ to test your RAM.
Post back if nothing shows up after that stuff.
My System SpecsSystem Spec
13 Feb 2010   #5

7 Ultimate x64
 
 

Adding to what ickymay said, it may be your PSU? Kingwin is ... how shall I say this... known for producing crap... and have the dubious distinction of making the Tier 5 "do not buy" list over at extremesystems: Official XS Power Supply Ranking Phase I - XtremeSystems Forums
My System SpecsSystem Spec
14 Feb 2010   #6

Windows 7 x64bit
 
 

Well cooling if definately not an issue, i will check out into getting a new psu. i figured 750 would be able to run it. my cpu idles at 25 and full load maybe hit 45-47. gpu usually idles at 30 and max load of 50. ill try mem test.
My System SpecsSystem Spec
14 Feb 2010   #7

Windows 7 x64bit
 
 

i did the minimum power supply link, it reccomended 695 for me. and i have 750. Should i go bigger?
My System SpecsSystem Spec
14 Feb 2010   #8

Windows 7 x64bit
 
 

No i am running one hd 5850
My System SpecsSystem Spec
14 Feb 2010   #9

Windows 7 x64bit
 
 

My System SpecsSystem Spec
14 Feb 2010   #10

Windows 7 Ultimate 32 bit
 
 

your power supply problem here is with amperage not watts you are only working with 18 Amps on the +12 volt rail and you should have around 35 Amps for you system
My System SpecsSystem Spec
Reply

 Trying to Solve problem




Thread Tools



Similar help and support threads for2: Trying to Solve problem
Thread Forum
How to solve this problem Music, Pictures & Video
help solve BSOD problem BSOD Help and Support
Solved Cannot use IE9. How do I solve the problem? Browsers & Mail
I need Your Help to Solve a Problem System Security
Can someone PLEASE help me solve this problem? Gaming
Who Can Solve This Problem... BSOD Help and Support
WLM problem...please solve it urgently..plz :( Software

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:36 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33