No DVI signal detected after Win 7 updates processed


  1. Arsik
    Posts : 1
    Windows 7 Home Premium 64 bit
       New #1

    No DVI signal detected after Win 7 updates processed


    Wonder if anyone can help with two (hopefully, unrelated) problems. I clean-installed Win 7 64 bit on a brand new build.

    Problem 1: BIOS sees both SATA II HDDs (set as IDEs) but Win 7 only sees one.

    Problem 2: Win 7 ran updates following fresh Win 7 install. After sytem reboot, my ViewSonic LCD monitor is showing 'no signal' (DVI to DVI connection). Tried my card on another PC - it definitely works. Plugged it back into my build - card worked fine. Until another Win 7 update / system reboot - and back to the original 'no signal'!

    System:
    XFX GeForce GT240
    Asus 775 P5Q Pro Turbo
    WD 640GB CAVIAR BLACK 7200RPM 32MB SATA-II x 2
    Intel Core 2 Duo E7400 S775 2.8GHz

    Many thanks in advance!
      My Computer
    Quote Quote

  3. neo101
    Posts : 592
    WIN7 Ultimate 64bit
       New #2

    Arsik said:
    Wonder if anyone can help with two (hopefully, unrelated) problems. I clean-installed Win 7 64 bit on a brand new build.

    Problem 1: BIOS sees both SATA II HDDs (set as IDEs) but Win 7 only sees one.

    Problem 2: Win 7 ran updates following fresh Win 7 install. After sytem reboot, my ViewSonic LCD monitor is showing 'no signal' (DVI to DVI connection). Tried my card on another PC - it definitely works. Plugged it back into my build - card worked fine. Until another Win 7 update / system reboot - and back to the original 'no signal'!

    System:
    XFX GeForce GT240
    Asus 775 P5Q Pro Turbo
    WD 640GB CAVIAR BLACK 7200RPM 32MB SATA-II x 2
    Intel Core 2 Duo E7400 S775 2.8GHz

    Many thanks in advance!
    Brand new build - you prob need to 'format' your other Sata drive!

    Why are you not running Ahci esp if you want to hot swap/run raid etc in near future!

    Driver install sequence to try
    > OS
    1.) Install Chipset drivers from Intel web site, then reboot
    2.) Install IMSM drivers from Intel Website, reboot
    3.) Install Graphic Card drivers, reboot (turn off antivirus/security etc first)
    4.) Install LAN drivers from ASUS web site
    5.) Install Audio Drivers
      My Computer
    Quote Quote

 

  Related Discussions
Hi all, Having issues with a ASUS H81M-C motherboard which shows no signal detected on boot. Equipment ASUS H81M-C MOBO, CORSAIR XMS3 4GB RAM 1600MHZ, INTEL G3258 1150 CHIPSET, 120GB SSD, BE QUIET 300W PSU notes no error bleeps on boot no signal detected on screen
I've been trying to record internal sounds from my desktop (youtube, internet etc..) into a DAW (Reaper, Audacity) I right click on the speaker icon at the bottom right of the screen on the taskbar. I click on 'Recording devices'. I right click on the list, and click 'show disabled devices'. I...
I am running windows 7 home premium 64 bit. And an atheros AR5B95 wireless network adaptor. Two weeks ago I discovered rootkit 0access on my computer, and after much hassle, performed a factory restore to fix the situation. Since then my computer has been mostly unable to detect wireless...
I have had my current PC for over a year, running Windows 7 with Media Center, and for almost the whole time I have had my OTA antenna hooked up to my PC and have never had issues. Today I decided to clean out the dust inside my computer, so I unplugged everything, including the coaxial cable from...
Hi! I want to view Media Center content in full screen on on my large screen LCD. Everything works fine but I can't get Media Center to run in full-sceen. When I switch to full screen mode the TV-displays the error 'no signal detected' and goes into sleep mode. Switching out of full...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 15:46.
Find Us