Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: ATI grey screen freeze

04 Apr 2010   #11

Windows 7 Pro

Quote   Quote: Originally Posted by sygnus21 View Post
Sorry. I have no further suggestions.

Well since you think its heat, I tested it with furmark and it handles well under pressure. As for constantly rendering the same image, again I minimize it making gpu load 0, nothing to render. My place is hot, so I been turning it off during the day while im out, and leaving it up at night since its much cooler. I also cleaned the dust from the fan. I am not quite sure how its getting hotter if the temp is stable. The hottest I let it get was 65c but it kept dropping between 60 and 63 for about 3 minutes, and then I got bored of the fur ring spinning :| This was a stability test.

My System SpecsSystem Spec
04 Apr 2010   #12

7 Ultimate x64

In all likelihood it's just another ATI driver bug and there's probably nothing you can do about it except wait for another release? That the card is able to loop futurmark without overheating probably means it's not a temp thing. I realize the 10.3 cats are supposed to be a great improvement over previous driver versions, but, they're really not. Yes, some issues are resolved... others, not so much.

Known Issues For All Windows Operating System
The following section provides a summary of open issues that may be experienced under all Windows operating system in the latest version of Catalyst™. These include:
  • Loading time between maps in "Battlefield 2: Bad Company" may be long
  • [Catalyst Control Center] Changing to deinterlace mode may default to adaptive deinterlace mode instead when playing videos
  • Pressing the "Page Down" button while configuring the last display in Eyefinity group may cause the bezel user interface to close instead of switching to the next display
  • Desktop mouse cursor may intermittently appear enlarged
  • Utilizing hardware shaders (perfect mode) may cause text to become corrupted and unreadable while loading any mission in "IL-2 Sturmovik: 1946" game
Known Issues under the Windows 7 Operating System
The following section provides a summary of open issues that may be experienced under the Windows 7 operating system in the latest version of Catalyst™. These include:
  • Black video may appear on one monitor when switching to clone mode during Bluray playback on PowerDVD
  • Green video may be visible in the beginning during AVCHD content playback with PowerDVD 9
  • Alt-Tabbing to desktop and back into "Mass Effect 2" game may cause the display to go black
  • Display may flash black when high settings of 19x12 are applied to in-game settings for "Dawn of War 2"
  • Catalyst Control Center might not remember the position of fourth monitor in Eyefinity group
  • Video corruption might be visible when watching live HD Jade Channel (Hong Kong) with Windows Media Center
  • Changing in-game resolution in "Alien vs. Predator" may result in screen flickering under Multi-GPU configuration; relaunching game will resolve issue
  • In-game anti-alias might fail to apply when other in-game options like Volumetric Effects are enabled in "Empire: Total War" and "Napoleon: Total War" games
  • Flashing black block corruption may be visible in "Battlefield 2: Bad Company" on some ASICs
  • Intermittent flickering and flashing textures may be visible in "Battlefield 2: Bad Company" on some ASICs
  • In-game V-sync option might not function in "Battlefield 2: Bad Company" until resolution/refresh rate mode change
Probably not the only issues still unresolved, just the major issues still unresolved...
My System SpecsSystem Spec
04 Apr 2010   #13

Windows 10 Pro

You can always check here to see what's up with ATI's drivers - CATALYST Drivers - Rage3D Discussion Area
My System SpecsSystem Spec

05 Apr 2010   #14

Windows 7 Pro

Yea, I upgraded to 10.3 after it happened. I also dropped the clock from 700mhz back to the stock 650mhz. I OC'd in the CCC thinking it wouldnt cause harm if ATI let me do it them self. Maybe I'm wrong? No grey screen yet, and it has been given a run for its money. Been playing GTA4, and I must say that game can really let rip on the GPUs load. Yea its not crysis, ooooooh, but that game is hardware intense still.
My System SpecsSystem Spec

 ATI grey screen freeze

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
grey screen
hi new to forum my laptop froze so i tried ctl/alt/del and nothing then it just went black screen with white cursor when i restarted it it came up launch in repair or start up normal have tried both and both time it gets to a grey page and freezes? has anyone any idea what i have done ? ...
Performance & Maintenance
Grey Screen
I am getting a PC freeze/crash that leaves a grey, lined screen. The only thing I can do is force a restart. Any ideas about the Grey screen??
BSOD Help and Support
Grey screen
My sony Vaio Z running windows 7 x 64 has suddenly gone to a screen with a shade of grey on all programmes, with less brilliance but a super luminescent cursor arrow or hand. Any comments for a cure, to get back to normal?? Thanks in advance
General Discussion
Grey screen on start up
Hi. When I start my windows 7 computor it goes perfect until I've logged in. When I'm supposed to see the desktop I can only see my mouse-pointer on a grey background..... Not even CTRL+ALT+DEL works...... Any suggestions? The windows came with the computor so it should work.... and...
BSOD Help and Support
ATI Sleep Grey Screen
So I want to be able to go into standby on my Windows 7 x64 desktop, but I cant resume without it crashing. Any ideas? Specs Below ------ CPU: Intel Core 2 Quad Q6600 RAM: 8GB G.Skill Mobo: Gigabyte EX38-DS4 Video: ATI HD 5770
Grey Screen on Starup!!!
So what I was doing was coping over my old hard drive to a brand new and bigger hard drive which I had partioned and formated already. I was using Norton Ghost 15 to do this, the procces took about 2 hrs. and 30 mins and when it was done I checked to make sure it had copied over correctly and as...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:20.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App