Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Problem Driver ATI X1200 in Seven RC1

28 Apr 2009   #11

Windows Seven

Thanks i test but i have 1 question more how unisntall microsoft ati driver????


I had problems with Age of Empires III and Spore, the games send me instant crash after black screen of loading, what happen????, maybe the reazon is ati driver or what?? Some ideas??? or someone have the same problem???



I reinstall windows and install Catalyst 9.1 and works thanks. And now only have the problem with the games

My System SpecsSystem Spec
28 Apr 2009   #12

Windows 7 build 7100

Has anyone gotten ANY drivers for the ATI X1200 to work with Build 7100 x64 outside of the standard VGA adapter that is the default installation.
I did a clean install of Build 7100 x64 and cannot find any ATI drivers for my integrated X1200 that work and am thus limited to a 1024 x 768 resolution, and no Aero support.
A phone call to ATI tech support simply had the tech tell me the X1200 has no Windows 7 support, and that Windows 7 is not a released OS, as yet and would not be receiving any new support in the near future from it's legacy drivers.
The X1200 does not support the Catalyst v. 9.4 (9.3 was the last version to support this integrated video card.) Has anyone had any luck with 9.1 or 9.2 on a 64 bit version of Build 7100? If so can you post how you installed the driver?

Thanks again

@ 12eason - Are you running a 64 but version of Build 7100?

UPDATE: Installed Catalyst v.9.1 (driver only) normally from ATI download site, and it installed smoothly without issues and is functioning without a hitch, thus far. I have not tried updating to v. 9.2. Once I get my programs reinstalled, and if I'm feeling bold, I may attempt that or hope for an update from Microsoft or ATI (unlikely) that will work.
Thanks for all those who responded to help solve this issue.
My System SpecsSystem Spec
28 Apr 2009   #13

Windows Seven

Hi, me again ¬¬ i have other problem, now i can run Spore, but the new problem is with the resolution in game, when i chosse a small resolution, example emm 800x600 the screen looks small and i cant play in full screen why???, the problem is with graphics card o what happen???


EDITED (again >.<)

The problem is with all games, example Empire Earth have the same problem.
My System SpecsSystem Spec

19 May 2009   #14

Win7 B7100

I've problems too.
I've Win7 B7100 x32 (clean inst)
I've a ATI x1200 motherboard/intergrated graphic card (says the manual).
Windows doesn't recognise it.
I've tried installing Catalyst 9.4, 9,3, 9.2 and 9.1.
The only one finding my graphic card is the 9.1 and it installes a driver för X1150.
Fine! But every now and then my monitor says theres no signal and turns black. The only thing left to is to hard reset the computer.
It seems that its depending of what I am doing on the computer. If a leave it, it will work properly. But if a start some programs it won't be long before it happens.

Thank you for your help.
My System SpecsSystem Spec
19 May 2009   #15
Crunchy Doodle

Windows 7 Ultimate x64

According to the Microsoft Update Catalog for Windows 7, you should be able to just do a Windows Update. You could also try this:

Microsoft Update Catalog

My System SpecsSystem Spec
21 May 2009   #16

Win7 B7100

Tried to install 9.1 again. It installed ok.
Tried to update windows, but it says that there's no uddates.
Tried to download the cab-files you recommended, but I really don't know what to do with them.
Anyway I unzipped the cab-file most recent (the big one) and copied the files to Windows/system32 and a few files were overwritten. I don't know if this gave any result since the files overwritten were newer (I saved them of cource).
Also I made all the changes I could think of in the Catalyst Control Centre.
Finally I set windows to "adjust for best performance".
Well, what happend?
Noting... same problem. I get the feeling it works a little bit longer before the screen turns black, but the fault is there. If a start IE and click on a tv-clip on a local newspaperpage I seem to get the fault rather quickly.

My System SpecsSystem Spec
21 May 2009   #17

Win7 B7100

I just got bluescreen (Instead of Blackscreen)
See info: (I also have the .dmp-file mensioned below, see attached file)

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7100.
Locale ID: 1053
Additional information about the problem:
BCCode: 116
BCP1: 85248510
BCP2: 90C4D9F4
BCP3: C0000001
BCP4: 00000003
OS Version: 6_1_7100
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
Read our privacy statement online:
If the online privacy statement is not available, please read our privacy statement offline:

Attached Files
File Type: zip (33.8 KB, 63 views)
My System SpecsSystem Spec
21 May 2009   #18

Windows 7077

Quote   Quote: Originally Posted by zleyphox View Post
Anyway I unzipped the cab-file most recent (the big one) and copied the files to Windows/system32 and a few files were overwritten.
It shouldn't of even let you do that. That would cause some serious problems.
My System SpecsSystem Spec
28 Aug 2009   #19
Raxiel Noir

Windows 7

If you wanted to install the latest driver for X1200 (catalyst 9.3) in Win7, maybe, (I SAID MAYBE. YOU'VE BEEN WARNED. ) i have the trick. Here goes.

1. Install the Vista's 9.1 driver. Restart.
2. Then open Device Manager, go to Display Adapters, go to Driver tab, click Driver Details. Write down the list of the driver files.
3. Install the Vista's 9.3 driver. Make sure the Catalyst Control Center and Display Driver were checked, if you choose custom installation. Ignore all error, I repeat IGNORE ALL ERROR. (at least you got your Catalyst Install Manager updated, right?) Restart.
4. Open the folder where you extract the content of the 9.3 driver (in my case, C:\ATI\Support\9_3_vista32_win7_32_dd_ccc_wdm_enu) then go to Packages >> Drivers >> Display >> LH_INF >> (the only folder left there, got it?)
5. Copy all files that listed on your driver files list (step 2). This prevents any other important files get overwrited, MAYBE.
6. Open the folder where you extract the content of the 9.1 driver (in my case, C:\ATI\Support\9-1_vista32_dd_ccc_wdm_enu_74233\Driver) then go to Packages >> Drivers >> Display >> LH_INF >> (the only folder left there, again...) and paste those files. Overwrite all.
7. And now uninstall the Display Adapter driver through Device Manager. (I never tried using the Catalyst Install Manager, so I don't know what will happen if you use it.) Don't forget to check "Delete the software driver for this device". Restart.
8. Install the 9.1 again, but instead using the downloaded executable file, use the extracted setup (in my case, C:\ATI\Support\9-1_vista32_dd_ccc_wdm_enu_74233\Driver\Setup.exe). If you got a warning, choose to install the driver. Restart.

Voila! Although the driver listed as 8.573.000 (the 9.1 version), the files inside were from 8.591.000 (the 9.3 version).

And if this don't worked out on your machine or the driver files were un-updated, reassure yourself that you do the same steps.

And if this trick blow up your machine... Well, YOU'VE BEEN WARNED!

See attachment.

I wish you all get it right like I do. (If you so obsessed with updating every driver you have in your machine like me... Well...)

Good luck!

Attached Images
Problem Driver ATI X1200 in Seven RC1-before.png Problem Driver ATI X1200 in Seven RC1-after.png 
My System SpecsSystem Spec
31 Oct 2009   #20
Devans Plymouth

Windows 7

I had the same problem with a 0x000007 BSOD error, and found a handy little tool online called BlueScreenView, which allows you to analyse the minidump file. I used this and found that the ATI Radeon drivers that Windows 7 installed were causing the fault. I downloaded the ATI Radeon Xpress 1200 drivers for Vista, and installed them, and hey presto, no more BSOD's!

The BlueScreenView is a very handy tool. I am now using the 9.3 drivers without any problems at all.
My System SpecsSystem Spec

 Problem Driver ATI X1200 in Seven RC1

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
ATI X1200 driver issues - OUT OF RANGE
Hello all, I am here in a desperate attempt to beg for help. I rarely ask for help so this is hard for me to do. I will try to give as much information as I can (I may give too much). I have also taken all the screen shots I can in the hope it can speed this up. I have also listed all the...
Graphic Cards
toshiba laptop, radeon x1200 64 bit driver help
I upgraded my os from windows vista 32 bit to windows 7 64 bit home premium a few days ago, and am having a horrendous time fixing the resolution problem. I can not seem to locate a driver from ati or toshiba themselves to support this upgrade, anything i do find does not install stating that the...
Resolution problem ATI x1200
I have a problem with my windows 7 ultimate => when i enter a game (Counter-Strike, Quake 3) it opens in the center of the screen with black all around it. PLEASE HELP! I have also tried to change the resolution from within the game, but at max. resolution (1024x768) it still has black around it....
Graphic Cards
Problem trying to play games on HDTV - ATI x1200
Hi, I have my Sony 50 inch Plasma hooked up to my PC running Windows 7. I have an ATI x1200 graphics card set at 720 x 1280. I get a great picture and everything fits to the screen. I can play DVD's etc with no problem but when I try and play a game such as Darkfall or use my Emulators the...
Graphic Cards
AMD Radeon X1200
when will AMD give out drivers for windows 7? With the x1200 series whenever the computer comes back from hibernation it freezes. And they keep saying that their drivers are not fully compatible with windows 7!!!!!!:mad:
General Discussion
Really Blurry on ATI x1200
Hey guys, I just installed Windows 7 and everything works fine (so far..) However, everything is blurry, not too blurry that I can't read anything, but blurry enough to be annoying. :( I'm not sure it was a driver issue, because Windows Update did not install the driver because it said a newer...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:01.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App