power supply?

Page 1 of 2 12 LastLast

  1. Posts : 16
    ?
       #1

    power supply?


    so im buying a new pow supp to replace my 300w pow supp which seems to have no cords attached to it , ill also be buying a radeon 5770 1gb graphics card. My question is when i hook up my pow supp willl i only have to attach one of it's cords to the graphics card and thats it? and is it easy to install a pow supp? dont know too much about comps fyi, i've watched some videos though and it doesnt seem too complicated.

    im getting this pow supp

    http://www.ncix.com/products/?sku=37325

    and heres my comp if that helps

    http://www.futureshop.ca/en-CA/product/hewlett-packard-hp-pavilion-amd-athlon-ii-630-quad-core-2-8ghz-computer-p6310f-p6310f/10137266.aspx?path=e4d499e9ec6767452f66ee7b3b4bed93en02&lid=fp-10137266 -hewlettpackardhppavilionamdath-en

    thanks for the help peeps
      My Computer


  2. Posts : 6,879
    Win 7 Ultimate x64
       #2

    They have a tendency to edit the cables out of those pictures, probably think it makes it look prettier or something. And yes you will have to connect one of the 6 pin PCI-E connectors to the 5770.

    As for changing the power supply this should help,

    How To Replace Your Power Supply | Hardware Secrets

    won't matter whether it is mounted in the top or the bottom of the case, there will still only be the four screws as shown in the tutorial holding it in. Just make sure to disconnect all the cables from the motherboard, hard drives, etc before removing the screws.
      My Computer


  3. Posts : 4,280
    Windows 7 ultimate 64 bit / XP Home sp3
       #3

    I just wanted to add take your time, put a little effort into routing your cables. It will help with air flow and keeping your system cooler in the long run. Fabe
      My Computer


  4. Posts : 474
    Windows 7 Enterprise x64 SP1
       #4

    Yes and can be. Installing a psu can be tricky depending on the case. An HP case is a modified matx case, which means you won't have a lot of room in the case to maneuver. Be ginger when switching out the psu. However, I am worried about the graphics card not fitting. The 5770 is a large card and space is at a premium. Also, study how the current psu is connected to the motherboard. The new one will have to have the same connections.

    I rebuilt an HP and encountered these space issues.

    FYI: Fill out your system specs on your profile once you're done. :)
      My Computer


  5. Posts : 6,879
    Win 7 Ultimate x64
       #5

    Lot of room? Somewhat of an understatement. I managed to find this,

    power supply?-p6310y.jpg

    here, HP Pavilion p6310y Review | ZDNet

    balltillifall if you haven't added a second optical drive you can stuff the extra cables in the empty drive bay under the one that is there.
      My Computer


  6. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       #6

    When I changed my last PSU, I first made sure that I tagged all the cables on the new PSU according to the connections from the old PSU. Just find the matching plug on the new PSU and attach a self sticky label with a description of where it belongs. That helps you to put some order into all those cables because there are probably a lot more on your new PSU than on your old one.
    Switching the PSU itself is not a big deal, but getting some order into all the cables (including the ones that are not being used) is another matter. Make sure you use enough cable ties and keep them away of any moving parts (e.g. the cooling fans).

    Here is how my place looked like:

      My Computer


  7. Posts : 474
    Windows 7 Enterprise x64 SP1
       #7

    stormy13 said:
    Lot of room? Somewhat of an understatement. I managed to find this,

    power supply?-p6310y.jpg

    here, HP Pavilion p6310y Review | ZDNet

    balltillifall if you haven't added a second optical drive you can stuff the extra cables in the empty drive bay under the one that is there.
    I like understatements. The HP I rebuilt was worse and that was because I had to supply parts for it - pratically half of the computer.

    Cable ties are great to use.
      My Computer


  8. Posts : 16
    ?
    Thread Starter
       #8

    im more worried about the box part of the pow supp fitting in not the cords, anyone know if it will fit for sure or? :)
      My Computer


  9. Posts : 2,344
    Windows 10 Pro x64
       #9

    I would not recommend that power supply it has a total of 400 amps on the two +12volt rails which means it is not an efficient power supply.
    If it fails it could take other parts with it (Motherboard,Ram)save your self some money and buy a good brand power supply, on the page you linked to there is a seasonic 600w that is a very good brand.
      My Computer


  10. Posts : 16
    ?
    Thread Starter
       #10

    out of 41 reviews it got a 4 out of 5, id be using this graphics card

    NCIX.com - Buy Powercolor Radeon HD 5750 PCs 700MHZ 512MB 4.6GHZ GDDR5 DVI HDMI VGA DIRECTX11 PCI-E Video Card - AX5750 512MD5-H In Canada.

    u sure i shouldnt get it?
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:40.
Find Us