 | |
| |
| 16 Aug 2010 | #21 |
| | It is, & thanks  |
My System Specs | |
| 21 Aug 2010 | #22 |
| | what if the voltages don't match? |
| My System Specs |
| 21 Aug 2010 | #23 |
| | If the new module is rated to run at a higher voltage than the current module - then that's an issue. |
| My System Specs |
| . |
| |
| 21 Aug 2010 | #24 |
| | well i've removed my old one and installed my new 2GB kit, however a blue screen keeps coming up about memory after a minute of startup. It says something about memory. What could be the problem? |
| My System Specs |
| 21 Aug 2010 | #25 |
| | Make sure you have the correct voltages. You'll need to check the memory than make sure the BIOS is set to that voltage, or close to it. Good luck. |
| My System Specs |
| 21 Aug 2010 | #26 |
| | The voltages are the same, as on CPU-Z it shows 1.8V & my old RAM was also that. I'm just going to return it |
| My System Specs |
| 21 Aug 2010 | #27 |
| | Sorry to hear that. Good luck. |
| My System Specs |
 |
Question about RAM timings problems?
| Thread Tools | |
| Similar help and support threads for: Question about RAM timings | ||||
| Thread | Forum | |||
| RAM Timings | Hardware & Devices | |||
| not sure about ram timings | Overclocking and Case Mods | |||
| i7 920 Ram Timings | Overclocking and Case Mods | |||
| timings for ram help | Overclocking and Case Mods | |||
| ram timings | Performance & Maintenance | |||
All times are GMT -5. The time now is 01:13 AM.
