Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't remove motherboard

19 Aug 2010   #1
bishop101

Windows 7 Professional x64
 
 
Can't remove motherboard

Hi, I bought a new case and wanted to gut out my stock HP m8400f case. But when I tried to remove the Motherboard I couldn't because 1 screw at the top right hand corner was sort of welded to the cage. It looked like one of those really tiny screws but using a small screwdriver I couldn't remove it. Any ideas? Please help.


My System SpecsSystem Spec
.

19 Aug 2010   #2
Tews

64-bit Windows 8.1 Pro
 
 

WD40 works miracles ....
My System SpecsSystem Spec
19 Aug 2010   #3
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

Almost sounds like it could be a rivet. Any chance of getting a picture of it?
My System SpecsSystem Spec
.


19 Aug 2010   #4
bishop101

Windows 7 Professional x64
 
 

Can't that damage the mother board? I also look on the back all the other screws once removed left clean screw holes this one particular screw had a back plate filling the void, leading me to believe it's welded or something. thanks.
My System SpecsSystem Spec
19 Aug 2010   #5
bishop101

Windows 7 Professional x64
 
 

I will post pic a few moments
My System SpecsSystem Spec
19 Aug 2010   #6
Tews

64-bit Windows 8.1 Pro
 
 

that is a rivet.. you will need to drill that out if you want to remove the mobo...
My System SpecsSystem Spec
19 Aug 2010   #7
bishop101

Windows 7 Professional x64
 
 

ImageShack Album - 3 images

The first two pictures show the rivet front and back, the last picture just shows what little space I have to maneuver to fit in a drill. How would I got about drilling? This is my first build and I was not anticipating this.
My System SpecsSystem Spec
19 Aug 2010   #8
Dwarf

Windows 8.1 Pro RTM x64
 
 

Doesn't look like a rivet to me. Rivets are used in the construction of many cases, but never in the mounting of a motherboard. The stresses incurred with inserting and fastening a rivet are far more than a motherboard can withstand. It looks more like a self-locking motherboard mounting post. With a pair of pliers, carefully squeeze the top of the post together. Be extremely careful here. Your motherboard should then lift out of the case.

Name:  Capture.PNG
Views: 394
Size:  210.5 KB


My System SpecsSystem Spec
19 Aug 2010   #9
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

Gives a whole new meaning to the term "no user serviceable parts".

Not a whole lot of room to work with, but I would start with a pair of pliers and see about squeezing those 4 nibs (or whatever you want to call them) together and see if it will come off that way.

If that doesn't work or you don't have pliers small enough to get to it, looks like it may be time to break out the drill. Not sure if going from the back would work just from the size of it. If you do have to go at it from the front I would make good and sure that any and all components are removed from the board, and then tape down newspaper or something to cover all the everything but where you are going to drill; won't do any good to manage to free the motherboard and have it end up dead due to a small metal filing getting stuck someplace it shouldn't have.
My System SpecsSystem Spec
19 Aug 2010   #10
Barman58

Windows 8.1 Pro x64 x3 + Windows 10 Preview, Ubuntu
 
 

Looking at the pictures I would personally work from the reverse side of the rivet (the flat head Pic 2), as there appears to be more room for access and you would not be working against the actual circuit board.

Rather that drill the rivet out, which is an option but would ideally require a drill rig to align with the centre of the rivet, but would grind the rivet head off using something suitable (I have a Mini-Dremel that can fit various cutting disks and grindstones but any suitable tool with speed control would do)
My System SpecsSystem Spec
Reply

 Can't remove motherboard




Thread Tools





Similar help and support threads
Thread Forum
Cannot Remove Motherboard, Packard Bell Laptop.
Hello, I'm having some trouble removing my motherboard, I have removed all the screws but still cannot seem to get it out, I tried contacting PB (Acer) but they haven't responded. I followed a guide and all, so I'm sure I've got all the screws ect... Anyways I've recorded it, I just don't want to...
Hardware & Devices
motherboard died and need new hdd on a new motherboard
Hello. I have read the forum on sysprep, however I see that there are some procedures which must be completed before the old HHD is removed and input into the new motherboard. Problem is.....My old motherboard crashed and I cannot implement sysprep on the old system, how would I get along...
Installation & Setup
Change motherboard. Cannot Start. How to remove drivers offline?
Hi, my motherboard is malfunction. Therefore, I changed a new motherboard. The hard disk was moved to new motherboard. When the windows logo loaded at start up, animate, it freeze on the half way, then it restart automatically. It should be the driver problem. The old chipset drivers is not...
Drivers
Motherboard 4gb Max or change motherboard for 8gb ?
Hey guys i just finished my build and i have no idea why i went for a motherboard with 2 slots for ram it can hold up to 16gb but luckly ebuyer sent me out an extra 4gb of kingston hyperx ram so i have 8gb all together but theres a problem theres 4 sticks ! obviously i wouldnt want to send...
Hardware & Devices
Can I remove an item from safely remove hardware list?
Hi all, In the safely remove hardware menu (from clicking the icon in the task bar) I have both my internal sata hard drives listed. I'll never want to remove these so is there a way to remove them from the list? I'm guessing it might require some registry editing but I've no idea where to...
Hardware & Devices
How to remove "safety remove" button from taskbar?
Hi, after I instaled Deamon Tools, Windows starth show safety remove button in taskbar. Its possible hide this button?
Customization

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 16:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App