Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: can't initialize to MBR!


21 Aug 2010   #1

 
 
can't initialize to MBR!

I just managed to install a second HDD, and my OS sees it.
However, Partition Wizard does not let me initialize to MBR.
When I go to "Disc" on the top bar, everything in the drop down menu is grayed out. It is NTFS formatted, made Primary, Status is "none". I want to prepare it to install Windows XP. What do I have to do to make this work?


My System SpecsSystem Spec
.

21 Aug 2010   #2

Windows 7 Ultimate x64, XP Mode, W8.1 Preview VM - 7 Pro x64 second remote tower
 
 

Forget using Partition Wizard and take a fast trip into the the Disk Management tool there to simply delete the present volume to see a new replacement using the add new volume wizard. The default option will be MBR automatically not the second GUID option you wouldn't use.

One possible problem for running into this would be a bad burn for a live cd for the PW program. This is one reason I have GParted on both live cds as well as written on a small bootable flash drive since the drive tool never seems to run into problems like this. That's another free option to consider besides going into the DM tool.
My System SpecsSystem Spec
21 Aug 2010   #3

 
 

Thanks, Night Hawk! I did what you wrote with the Disk Management tool. It did not offer to initialize to MBR - is that automatic?
Is the drive ready now for XP installation?
My System SpecsSystem Spec
.


21 Aug 2010   #4

Windows 7 Ultimate x64, XP Mode, W8.1 Preview VM - 7 Pro x64 second remote tower
 
 

If you deleted the first and simply went ahead and created the new one the XP installer will format it for you during the custom install as well as place it's own mbr entries in. You should be set.

To avoid the need to repair the 7 boot information as mentioned in the Method Two for seeing XP installed after 7, Dual Boot Installation with Windows 7 and XP you may want to first unplug the 7 drive to prepare for a stand alone install of XP.

Once XP is on you can simply copy the boot files over to the root of the 7 host drive and edit the boot.ini file(copy of) there to point at the second drive as well as use EasyBCD to add a new boot entry into the 7 boot options. Instead of "rdisk(0)partition 1)" you would see "rdisk(1)partition 1" making that small change using NotePad and use the "save as all files" option not txt to see that taken care of.

You usually have to take ownership if you unable to uncheck the "read only" box on the copy however. Another tip is simply lowering the default 30 seconds for seeing the boot options screen displayed way down to only 5 seconds. Here I have lowered down to only 3. That will speed up the boot time quite a bit!
My System SpecsSystem Spec
21 Aug 2010   #5

Windows 7 Professional (x86)
 
 

Quote   Quote: Originally Posted by Alsenor View Post
I just managed to install a second HDD, and my OS sees it.
However, Partition Wizard does not let me initialize to MBR.
When I go to "Disc" on the top bar, everything in the drop down menu is grayed out. It is NTFS formatted, made Primary, Status is "none". I want to prepare it to install Windows XP. What do I have to do to make this work?
Could you write data on that HDD?
You can try with Disk Management in Windows. Just open Computer Management in Administrative Tools, then select Disk Management. Note the middle-bottom area. All your storage device (including optical drives, USB flash drives, external HDDs) are listed here. Drive 0 is your main HDD that current Windows version is installed on. And drive 1 is your second HDD (if you have only 2 HDDs). Right-click on drive 1 and select "Initialize Disk", then follow on-screen instructions .
My System SpecsSystem Spec
21 Aug 2010   #6

 
 

Quote   Quote: Originally Posted by Night Hawk View Post
If you deleted the first and simply went ahead and created the new one the XP installer will format it for you during the custom install as well as place it's own mbr entries in. You should be set.
Ok, I loaded the XP CD, and it started loading its files, but then the blue screen appeared and the message that something went wrong (too much text to remember). "If this is the first time this happened, turn off computer and try again ..." was part of that message. It didn't even let me restart with Ctr-Alt_Del, and I had to cut the power.
Quote:
To avoid the need to repair the 7 boot information as mentioned in the Method Two for seeing XP installed after 7, Dual Boot Installation with Windows 7 and XP you may want to first unplug the 7 drive to prepare for a stand alone install of XP.

Once XP is on you can simply copy the boot files over to the root of the 7 host drive and edit the boot.ini file(copy of) there to point at the second drive as well as use EasyBCD to add a new boot entry into the 7 boot options. Instead of "rdisk(0)partition 1)" you would see "rdisk(1)partition 1" making that small change using NotePad and use the "save as all files" option not txt to see that taken care of.
You usually have to take ownership if you unable to uncheck the "read only" box on the copy however. Another tip is simply lowering the default 30 seconds for seeing the boot options screen displayed way down to only 5 seconds. Here I have lowered down to only 3. That will speed up the boot time quite a bit!
This is a bit too technical for me to follow!
My System SpecsSystem Spec
21 Aug 2010   #7

Windows 7 Ultimate x64, XP Mode, W8.1 Preview VM - 7 Pro x64 second remote tower
 
 

Here's a few screens that show how the add new volume wizard works. DiskPart was used at the time to clean the drive off followed by the trip into the DM.


Attached Images
       
My System SpecsSystem Spec
21 Aug 2010   #8

 
 

I ran it again and wrote down that text on the blue screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this screen, restart your computer. If it happens again, do the following:
Check for viruses on your computer.
Remove newly installed hard drives or hard drive controllers.
Run CHKDSK /F to check for HD corruption, then restart.
My repeated tries made no difference, it keeps happening.
I have no viruses (AVG installed).
Should I really pull out my new drive, after it is recognized?
Should I run CHKDSK /F?
My System SpecsSystem Spec
21 Aug 2010   #9

 
 

Yes, my trip to the DM looked the same as your images. But I still can't install XP.
My System SpecsSystem Spec
21 Aug 2010   #10

Windows 7 Ultimate x64, XP Mode, W8.1 Preview VM - 7 Pro x64 second remote tower
 
 

Quote   Quote: Originally Posted by Alsenor View Post
I ran it again and wrote down that text on the blue screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this screen, restart your computer. If it happens again, do the following:
Check for viruses on your computer.
Remove newly installed hard drives or hard drive controllers.
Run CHKDSK /F to check for HD corruption, then restart.
My repeated tries made no difference, it keeps happening.
I have no viruses (AVG installed).
Should I really pull out my new drive, after it is recognized?
Should I run CHKDSK /F?
We just missed each other on the last post I see! Now are you trying this with the partition created with the PW program or did you create a new primary before booting from the XP cd?

While booted in 7 you can schedule another run another run of checkdisk with the /r switch but may want to start off with a second fresh primary once the problem partition is gone. Simply right click on the drive in the DM in order to see it deleted. You can then create a new primary with the wizard or when going to boot from the XP cd the next time allowing the XP installer to format it during the next attempt.

By first using the DM to see the new one created and formatted there you can try copying some files over to it to see if the drive itself has any defects like bad sectors however. That will save you some time as well.


Attached Images
 
My System SpecsSystem Spec
Reply

 can't initialize to MBR!




Thread Tools



Similar help and support threads for2: can't initialize to MBR!
Thread Forum
WD 1TB Ext HDD will not initialize - Incorrect Function Hardware & Devices
Win 7 backup hangs on initialize. Backup and Restore
Solved Initialize New Hard Drive/Where is it? Hardware & Devices
Solved Missing file when trying to initialize HDD Hardware & Devices
WD- 2TB Caviar Green won't initialize Hardware & Devices
Cannot Initialize HDD Hardware & Devices
XP Can't Initialize Virtualization

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:40 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33