Windows 7: Disk boot failure, insert system disk and press enter

Hello everyone, i have a problem with hard drive. I tried to add 1TB HDD from my old pc to new one as a second hard drive, ive connected everything and tried to boot my pc. I got this message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I checked in bios and it didn't find my hard drive, then i unpluged all my hard drives and put old hdd from my old pc with windows 7 and it worked, but of course i got bsod. Now even my first hard drive doesn't work i get the same message. Can anyone help me ?

Have you switched the jumper settings on the old one to slave?

Be sure that old drive is second in the boot chain. Take a look at bios settings. Physically connect as second in the chain.

@karlsnooks thanks for reply, but i already did that and in bios it shows only my old Hard drive, the new one isn't there
@Love Windows 7 thanks for reply, but i don't know how to do that =\

Perhaps the words old and new are confusing me.

At one time you had a drive in the computer and all was ok.
Later you added a second drive and now nothing works.

If that is true, then remove the second drive.
Does the system function correctly now?

Take a look at page 26
http://download.gigabyte.asia/FileLi..._rev.2.0_e.pdf

@karlsnooks yes, thats true, but no, it still doesn't work =[

@theog thanks, i understand now, but i don't have that cable thing to connect to slave

Set jumper correctly to be master. Connect to correct cable/cable connector.

W00T! thanks karlsnooks! i think its working now

What type of DVD/CD drive are you using PATA or SATA?