Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Thinking this is a hardware issue

05 Dec 2010   #21

Microsoft Windows 7 Ultimate 64-bit SP1

try this tool next time - Dmitriy Primochenko Online (HDD regenerator) it successfully repaired my WD drive with no loss of data

My System SpecsSystem Spec

 Thinking this is a hardware issue

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Hardware Issue or Not?
Never mind Keep Topic Opened .
Hardware & Devices
hardware issue or windows 7 issue
A couple months back, had issues with windows attributed to virus. I formatted C drive and did a clean install. Last week, windows was having issues with win explorer stopping , random crashes etc so i did another clean install Friday. Since then, I have had a few blue screens of death flash...
General Discussion
New build BSOD, thinking secondary data drive is issue
Thanks all for the help (preemptive) The build is as follows Core i5 3570k (not over clocked yet) ASRock z77 extreme 4 Samsung 120G SSD Seagate Barracuda 2tb 72k 8gb (4x2) Cruicial ddr3 1600 ram GTX 680 700w OCZ Modular p/s
BSOD Help and Support
Hardware issue?
My computer isn't BSOD'ing per-say, but it is crashing. It is instantly powering off as if I unplugged the battery on it. With a slowly but seemingly increasing frequency. Is this more likely a software/drivers issue or a hardware one? It's a laptop with Windows 7. About 2 years old. Does it need...
BSOD Help and Support
OS or Hardware issue?
Ok. Im at my wits end with this computer. My system will hang for 1-3 minutes randomly but with increased frequency right after a boot up. It will have moments of response within hang. Any click or action performed during the hang will be performed upon the hang finishing. The cursor is 99%...
General Discussion
BSOD (Thinking its Bad Hardware)
I have been battling with BSOD's for a couple of months now. They first appeared after I installed a Hauppauge HVR 1600. A few weeks went by with no problems. I then began to get low bit rate erros while watching TV in Media Center. Shortly after that I received my first BSOD. The steps I have...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:39.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App