Printer. Can I set up a static IP address ?


  1. Posts : 93
    Windows 7 professional X 64
       #1

    Printer. Can I set up a static IP address ?


    I have a Belkin router with the PC plugged into port 1 and my Konica Minolta 2430DL plugged into port 2. The problem I have is that whenever the router restarts (power cut/switch off etc) the router reasigns a different IP to the printer. This means I have to go into printer properties and add a new TCP port with the correct IP address.

    I've tried bi directional pooling with a number of different ports but the computer struggles to find the printer unless I specify just one port.

    Anyone have any ideas how to fix this ?
      My Computer


  2. Posts : 489
    Windows 7 Professional (x64/SP1) /Linux Mint 16
       #2
      My Computer


  3. Posts : 2,686
    Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
       #3

    There should be an option in your router to assign the same IP every time. Check your Lan and DHCP options. My D-Link calls it DHCP Reservation but yours may call it something else.

    Jim
      My Computer


  4. Posts : 93
    Windows 7 professional X 64
    Thread Starter
       #4

    Thanks, I'll give it a try tomorrow (I'm off down the pub in a mo ).
      My Computer


  5. Posts : 2,686
    Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
       #5

    Prof Kerfuffle said:
    This works for a PC but not a Printer as the OP has requested.

    Jim
      My Computer


  6. Posts : 2,686
    Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
       #6

    Odd Job said:
    Thanks, I'll give it a try tomorrow (I'm off down the pub in a mo ).
    That would be my first choice.

    Jim
      My Computer


  7. Posts : 14
    Windows 7 32-bit
       #7

    DHCP Reservation


    You'll need your printer MAC address to complete this. On your router you may be able to display the MAC address and make the reservation.
      My Computer


  8. Posts : 93
    Windows 7 professional X 64
    Thread Starter
       #8

    Jim, just been into my router and found this in help:

    DHCP
    The DHCP server function makes setting up a network very easy by assigning IP addresses to each computer on the network. The DHCP Server can be turned off if necessary. Turning off the DHCP server will require you to manually set a Static IP address in each computer on your network. The IP pool is the range of IP addresses set aside for dynamic assignment to the computers on your network. The default is 2-100 (99 computers) if you want to change this number, you can by entering a new starting and ending IP address and clicking on "Apply Changes".
    So if I read this right, if I turn off the DCHP server function then I can assign a static IP for each machine (including printer). Does this also mean that whenever a new machine wants to connect I have to set it up manually ?
      My Computer


  9. Posts : 14
    Windows 7 32-bit
       #9

    Sounds like your router doesn't support DHCP reservations. If you turn off DHCP then you would have to manually set the ip, subenet, gateway, and dns setting on the computer. A lot of network cabable printers allow you to set that up as well. This would work as long as you can manually set the addressing on the printer. Note: if you use wireless for conection, then manually setting the wireless setting would have to be changed back to automatically detect when you roam aways from your home. Ideally, reservation is the best option.

    Personally,based on what you have indicated, I would leave the DHCP on, set the lease addressing starting with x.y.z.100 and then manually set the printers IP to a low address like x.y.z.10. That way you still have dhcp for your computer and it can roam without changes and the pinter will have essentially a static address.
      My Computer


  10. Posts : 2,686
    Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
       #10

    Leave DHCP enabled. There should be another section to assign an IP to the Mac. What model router do you have?

    Jim
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:26.
Find Us