SATA host card


  1. wpaul281
    Posts : 25
    windows7
       New #1

    SATA host card


    picked up a sata host card a while back just now needing to use it looking to us a ssd for a boot drive and move another drive from the board to the card. With the card in the pci slot everything works normal when I connect a hdd to it it causes the entire system to become very slow (can't even get it to open the start menu slow)???
    Card is sil3512 and the drive was just going to be used for storage nothing on it works fine connected to the motherboard.
    Thanks
    Paul
      My Computer
    Quote Quote

  3. wpaul281
    Posts : 25
    windows7
    Thread Starter
       New #2

    Dose anyone think I may have a bad card?? I have looked all over the net to see if I missed a setup/ installation step and I have found nothing..
      My Computer
    Quote Quote

 

  Related Discussions
Need SATA-3 Card
in Hardware & Devices

My original motherboard was replaced with a MSI X58 Pro-E. This motherboard does not support SATA-3 as are my hard drives. Is there a SATA-3 card that would work in one of the below slots at the SATA-3 6GB/sec? Slots • 3 PCI Express gen2 x16 slots - two dark Blue PCIE x16...
WIN 7 Ultimate, 64 bit, ASUS M3A78-EM Motherboard. I built my PC about 3-4 year ago using the above MB and OS and I am very happy with it. I recently decided to install a 4 port, front, USB 3 hub. The MB doesn't directly support USB 3 but does have a PCIe 2 slot. I purchased from...
SATA 3 PCI Card
in Hardware & Devices

I bought a SATA card in advance of buying a SSD. I wanted to make sure the card and the port worked OK. I figured a $20 loss would be preferable to buying a SSD and finding out the port wouldn't work. == Anyway, I put the card in and hooked my present OS HD drive to it. Things worked OK. I...
So I have had a HighPoint 644 SATA III 6.0 GB host card in my system for some time now, and yes, it was a total pain to set up when I initially installed it. I recently picked up a new 3TB SATA III 6.0 GB drive (newegg had uhm on sale) and I had a spare HighPoint 620 SATA III Host / RAID...
I've just isntalled VPC over Win7 7077 but on the network settings I cant choose my LAN connection, I only have the option of Shared NAT? Is there any problem reported regarding this subject?
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 09:54.
Find Us