Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Onboard vs Win 7 RAID 1

30 Nov 2010   #1
moosehead

Windows 7
 
 
Onboard vs Win 7 RAID 1

Hi

Been looking around and decided just to ask directly. What is the better option in terms of performance and future proofing (reinstalling windows or upgrading hardware) for a RAID 1 Array; Windows or an onboard MB controller? I have 2 WD 1.5TB drives i am going to be using for data only not the OS. My motherboard is a Asus Crosshair III Formula

Thanks


My System SpecsSystem Spec
.
03 Dec 2010   #2
BigHildy53

Windows 7 Ultimate x64
 
 

If I understand your question properly, hardware RAID is much better on performance than software RAID. I have an ASUS P6X58D-Premium motherboard and I have two RAID-1 setups.
My System SpecsSystem Spec
Reply

 Onboard vs Win 7 RAID 1




Thread Tools




Similar help and support threads
Thread Forum
RAID - deleted RAID array, Windows 7 ok but I have questions
Hi all, My RAID 1 (I think? I have two equal drives that are mirrored) array was causing me a lot of pain. It kept freezing up my system and having me to had to rebuild the RAID too often. After a number of tests and browsing info online, I've decided that the RAID was the culprit of the freezing...
Hardware & Devices
Win 7 raid 0 setup / missing raid controller driver
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when...
Drivers
RAID 5 switched from single storage to raid 5, lost drive letter
I am running 7 pro 64bit on a ASUS p8p67 deluxe mobo and I copied all data from my 1tb storage D: drive to a backup external and proceded to install raid 5 with 3 single 1tb drives and the raid is up an running. However using Intel Rapid Storage Technology to setup the raid inside windows I had to...
General Discussion
Cannot boot from non-RAID image restored to RAID SSD
OK, I was using one Vertex 120 as my Windows 7 C: drive and bought another to take advantage of RAID0 performance. Did a system image backup of the C: drive to my 1TB D: drive, installed the 2nd Vertex 120 (both are FW 1.5), enabled RAID in BIOS and created a RAID0 in the Intel RAID launch...
Backup and Restore
Windows 7 System Image - Restore Non-RAID to RAID 0+1
I created a windows system image with the backup and restore utility built into win7. This windows install is on a single hard drive. I built and onboard RAID 0+1 array and used the windows 7 install disk to restore the image on to the new RAID volume. Windows starts to boot up but the screen goes...
Backup and Restore
Can not find drive for Gigabyte Onboard Raid-Controller
Greetings! So I installed the Windows Seven RC x64 today on my desktop machine after having a great experience on my notebook. Most things worked out just fine, but the onboard raid controller is giving me alot of trouble (I got two hard disks connected there, should be raid0?), my mainboard is a...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App