Windows 7 SSD Setup Info


  1. shmiffy24
    Posts : 2
    Windows 7 64 bit
       New #1

    Windows 7 SSD Setup Info


    Hi.

    First off im sorry if this has already been asked.

    I Currently have two WD 320GB HDD's raided into one large drive ( raid 0 i think) and have ordered an OCZ Vertex 2 60GB SSD.

    I Intend to use the SSD as a Boot drive and for the most used applications- The other apps can go onto the storage HDD's.

    I Require Help with the following:

    1) Should I raid the two HDD's into one storage drive as I have at the moment? Or use one drive for the applications and the other for files like My Documents, Photos, videos, music etc.., would this way reduce the risk of me losing my files?

    2) Should I do a clean format of the storage drives?
    Ideally I would like to install windows 7 onto the SSD for the boot drive purpose and onto the freshly formatted HDD's incase the SSD breaks, I can then remove the SSD and just use the HDD.
      My Computer
    Quote Quote

  3. Golden
    Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       New #2

    Hi,

    My suggestions is to have:

    1. The OS and most applications on the SSD.
    2. Your data/storage drive on the mechnaical HDD's in a RAID0 configuration
    3. Use an external USB drive to backup your RAID0 storage drive

    This is the system that I currently use (see my System Specs).

    I install large game files to the RAID0 storage drive instead of the SSD.

    Whilst its true that if one HDD of the RAID fails then the entire contents of the stoarge are lost, you can offset this loss through the backup on your external USB drive. With a RAID0 you are sacrificing redundancy for speed, and its a question of whats more important to you. Using something like Macrium Reflect Free (http://www.macrium.com/reflectfree.asp) to image/backup offsets the risk in my opinion, so I choose to take advantage of the speed that the RAID0 configuration delivers.

    I'm not sure that having a duplicate boot installation on one of the mechnical HDD's serves any purpose. If the SSD is new (which in your case it is) and well maintained (see link later on), it has no more probability of failure than a mechnical HDD. I would use both mechnical drives, either in RAID0 or separate, as storage/data drives. Again, you can use Macrium images to recover very quickly in the worst case scenario.

    Since the SSD is brand new, you don't need to perform any alignments during Windows installation : the OS takes care of that for you.

    Here is a useful guide to optimising your SSD once you decide to get your system setup, and have installed the OS and applications to that drive:

    SSD Windows 7 Tweaks
    Guide * Windows 7 Ultimate Tweaks & Utilities *

    Let us know if you need further help. There are many experienced people here that will help you get things nicely sorted out.

    Regards,
    Golden
      My Computer
    Quote Quote

  4. shmiffy24
    Posts : 2
    Windows 7 64 bit
    Thread Starter
       New #3

    feedback


    Thanks very much for your reply, i think i will go for your suggestions as its the best i can see ( surprised i didnt think of the benefit of raiding the HDD's)

    In response to the boot drive on teh HDD's- it was a thought just incase teh ssd broke leaving me without a b oot drive. i could simply boot from the HDD instead as i am doing so now.

    Thanks again for your quick response. :)
      My Computer
    Quote Quote

  6. Golden
    Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       New #4

    No problem. As I said, the HDD has just a good a chance as dying as the SSD.

    Regards,
    Golden
      My Computer
    Quote Quote

 

  Related Discussions
I have several Asus Eee netbooks that I'm getting set up to use at my school. I had some parent volunteers helping me get them ready to deploy, and one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup. Now when I...
last week, my windows 10 upgraded laptop always gets not responding, then i decided to format my laptop and reinstall windows 7, when i was copying my important files to data d, suddenly it crashed then stucks at the start up loading, then i tried to do the automatic repair and just reset it, then...
WINDOWS 7 Setup stuck at "setup is starting" in my acer aspire...........and waited for 1 hour and finally went to partition drivers ........ i pressed next and i am stuck at Copying Windows Files (0%)........and finally after half an hour...it came.................."Windows could not format...
Yesterday I bought a new mother board for my PC my Processor model is AMD Athlon II X3 440 Triple Core Processor, but after changing Mother Board in system information it's showing my Processor as AMD Phenom II 4 B40 four core processor. I don't know why it is showing like this. Is this dangerous...
windows xp info....
in Chillout Room

I love this forum...its helped on litterally every win7 issue I have had. However I have 4 winxp machines for my buissness. They on adverage have given very little issue. but Now Im having a BSOD that I cant seem to get past. Completely out of the blue,, no new drivers no nothing. Like i say its a...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 16:55.
Find Us