Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win XP Pro - How to install drivers if i don't know motherboard make?

29 Jan 2011   #1
dannyboy2005

Windows 7 Pro X64
 
 
Win XP Pro - How to install drivers if i don't know motherboard make?

I have my dads old computer.

I have just re-formatted it due to several virus and BSOD

I have installed XP Pro. Its all up and running but i need to install mainly a ethernet driver so i can get on the web and download updates.

The problem is, i don't know what Mobo is inside and i have no ideas how to look for drivers. The Ethernet driver needs to be installed so i can access the web via my broadband.

Is there any way i can find out what mobo it is? or a program to tell me?

Thanks

Dan


My System SpecsSystem Spec
.

29 Jan 2011   #2
FijiJohn

Win7 Ultimate x64 +Win 7 Pro x64
 
 

Yes there are some programs to detect hardware but if your eyes are good (or you have a magnifying glass [I am old]) look at the motherbaord and you will see a couple of small(!) square chips, usually nearest the back. Typically one is audio and one is Ethernet. Most common are Realtek or Broadcom (or maybe Intel if it is an Intel chipset board). Note the brand and number of the chip. You wil see something like "RTL8111". Once you have that, just Google for that and add "+driver +XP" (minus quotes of course) and you'll have it. Same for audio chip driver.
My System SpecsSystem Spec
29 Jan 2011   #3
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

Quote   Quote: Originally Posted by dannyboy2005 View Post
I have my dads old computer.

I have just re-formatted it due to several virus and BSOD

I have installed XP Pro. Its all up and running but i need to install mainly a ethernet driver so i can get on the web and download updates.

The problem is, i don't know what Mobo is inside and i have no ideas how to look for drivers. The Ethernet driver needs to be installed so i can access the web via my broadband.

Is there any way i can find out what mobo it is? or a program to tell me?

Thanks

Dan
download the free version of speccy Speccy - System Information - Free Download that will tell you the mobo then we will take it from there
My System SpecsSystem Spec
.


29 Jan 2011   #4
dannyboy2005

Windows 7 Pro X64
 
 

Quote   Quote: Originally Posted by pebbly View Post
Quote   Quote: Originally Posted by dannyboy2005 View Post
I have my dads old computer.

I have just re-formatted it due to several virus and BSOD

I have installed XP Pro. Its all up and running but i need to install mainly a ethernet driver so i can get on the web and download updates.

The problem is, i don't know what Mobo is inside and i have no ideas how to look for drivers. The Ethernet driver needs to be installed so i can access the web via my broadband.

Is there any way i can find out what mobo it is? or a program to tell me?

Thanks

Dan
download the free version of speccy Speccy - System Information - Free Download that will tell you the mobo then we will take it from there

After i made this thread, i downloaded speccy.

It says i have "Dell Computer Corp. Model: 0G1548"

Upin a google search i found that the 0G1548 came from a dell dimension 2400.

So far, even on the dell website, i'm having problems locating a Ethernet driver

http://support.dell.com/support/down...&catid=&impid=
My System SpecsSystem Spec
29 Jan 2011   #5
FijiJohn

Win7 Ultimate x64 +Win 7 Pro x64
 
 

"So far, even on the dell website, i'm having problems locating a Ethernet drive" Yep. Sometimes it's easy and sometimes not. YOu might just see if you have a chip with RTL8102 on it. I kinda think that may be the one they used on that model. If so, easy enough to find the driver for that chip.
My System SpecsSystem Spec
29 Jan 2011   #6
pebbly

win 7 ultimate32bit, Win8.1pro wmc 32bit
 
 

try these Drivers and Downloads install in compat mode Compatibility Mode
My System SpecsSystem Spec
29 Jan 2011   #7
bobkn

Windows 7 Pro X64 SP1
 
 

Quote   Quote: Originally Posted by dannyboy2005 View Post
After i made this thread, i downloaded speccy.

It says i have "Dell Computer Corp. Model: 0G1548"

Upin a google search i found that the 0G1548 came from a dell dimension 2400.

So far, even on the dell website, i'm having problems locating a Ethernet driver

Drivers & Downloads
The driver would be in the Network section. The only one that I see there is for an integrated Broadcom 4401 NIC:

http://support.dell.com/support/down...1&fileid=84196

It dates from 2003.
My System SpecsSystem Spec
29 Jan 2011   #8
alphanumeric
Microsoft MVP

Windows 8.1 Pro with Media Center 64 bit
 
 

Dell computers usually have a "Service Tag Number" on a sticker on the case or listed in the BIOS. If you can find that you just input it on the Dell support page and you'll be taken to a page with the specific drivers for your model.
My System SpecsSystem Spec
30 Jan 2011   #9
dannyboy2005

Windows 7 Pro X64
 
 

Quote   Quote: Originally Posted by pebbly View Post
try these Drivers and Downloads install in compat mode Compatibility Mode
Spot on!

These were the ones i required.

Unfortunately, the computer seems to have some hardware malfunction and even though its a clean install of XP Pro, it keeps restarting its self, not even loading into windows and computer keeps beeping.

Now, i'm not sure if its because i left the computer on all night, downloading windows update and the computer perhaps turned its self off after half hour, corrupting a critical file needed for XP during the download and this has corrupted the start up?

I'm thinking its a hardware problem. My dad said his computer used to do this before i looked at it.

Thanks for the link though.
My System SpecsSystem Spec
30 Jan 2011   #10
alphanumeric
Microsoft MVP

Windows 8.1 Pro with Media Center 64 bit
 
 

Have you had the side cover off and looked inside? If not now is the time to open it up and give it a good cleaning. Once you have all the dust bunnies out I would re-seat your RAM and any add in cards like video, sound etc. Also have a look at the power cables and IDE or SATA cables and make sure they are plugged in correctly. Leave the side cover off and then try powering it up. Check the fans, especially the one on the processor and video card, to make sure they are working. Overheating will cause a PC to shutdown. BIOS beep codes are a sign of a hardware fault. The pattern, long or short, how many, and in what order can tell you what might be causing the problem. They are specific to the BIOS on the motherboard so you may have to do some digging to figure out what they mean.

EDIT: When touching the internal components take care to avoid electrostatic discharge. Touch the metal case of the power supply before touching anything else and don't do this while standing on a carpet if you can help it.
My System SpecsSystem Spec
Reply

 Win XP Pro - How to install drivers if i don't know motherboard make?




Thread Tools





Similar help and support threads
Thread Forum
Make Windows 7 bootable after motherboard swap
Make Windows 7 bootable after motherboard swap, or bootable after swapping hard drive to new machine. Software described Paragon P2P Adjust OS. This procedure describes how to do it. Procedure can be used in case of: Windows 7 Installation - Transfer to a New Computer doesn't work. You...
Tutorials
Clean re-install of Windows 7 and motherboard drivers
Hi How do I perform a clean re-install of Windows 7 which would completely remove motherboard drivers on the system? This is my very first self-build and I have some system instability as some motherboard drivers failed to install correctly. For example, despite having installed an audio hd...
Installation & Setup
How to Identify Motherboard make and get necessary driver online
Hi, I am planning to re-install my windows 7 OS.I have lost the motherboard driver DVD and am not sure about the make of the motherboard.How can I identify the Motherboard make and get the desired Driver software online? :geek: Regards
Drivers
Unable to install new motherboard drivers
I got a new motherboard and processor today and whenever I boot up the pc I have to go into safe mode because if I boot as normal it will stay on the windows welcome screen with the rotating loading circle and will stay there. But when I boot in safe mode I cannot access my driver cd, it tells me...
Drivers
Make ISO from DVD/Change to univeral install make USB
Ok I've only been a member for a short time and like this site. Lots of info. What I want to do is make a Win 7 ISO file from my DVD install disk. Which is a retail upgrade version. Then I want to change the install routine to make that ISO a universal install ISO. Then I want to make a USB...
Installation & Setup
Fresh install new Motherboard all new drivers crashing?
I just installed a ASRock A770DE+ that I got new yesterday. I have all the screws secured no chance of arching. I get these crashes mainly on startup. I tested the C: drive which is a Velociraptor 160gb with some good diag software. I completely erased it and reformatted with Western Digital Data...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 20:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App