Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 won't boot after removing secondary drive


30 Jan 2011   #1

Windows 7 Home Premium 64 bit
 
 
Windows 7 won't boot after removing secondary drive

Hi, When I installed windows 7 I had 2 hard drives hooked up, a SATA drive "C:" and an IDE "D:". I installed windows to the SATA drive and now want to remove the IDE but when I do I get a message that says "reboot and select proper boot device or insert boot media in selected boot device and press any key." While researching this I have seen that windows will sometimes put some data on the secondary drive while installing and I should have pulled it before installing windows. Is this what happened to me and if so is there any way I can fix it without doing a "repair install" from the windows dvd? I've tried running the startup repair from the install disk and it didn't work. Windows XP was installed on the IDE drive when I installed windows 7 the to SATA drive. Thanks.

My System SpecsSystem Spec
.

30 Jan 2011   #2

Windows 7 Pro x64 SP1
 
 

Welcome Jwhite to the forums. One of your problems is that the install for windows 7 found your installed XP installation and made some changes in the boot record. Can we assume that you used to boot from the IDE drive with windows XP?

If So, then your probably out of luck as the system seems to think that your boot drive is really D as the boot record contains some information for the ntloader for windows 7.

I would bet that you won't be able to boot your XP installalation from your D drive if you remove your SATA drive from your machine.

I always recommend removing the cables from any other disk when doing an install.

Less aggrivation would be to remove the D drive and then boot your windows 7 dvd and do a format and install of windows 7.

Some of your data from the old D drive is probably still available once you have successfully installed Windows 7 on your Sata drive.

YMMV
Rich
My System SpecsSystem Spec
30 Jan 2011   #3

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Hello Jwhite85. Welcome to the Forum.

Yes, you have correctly diagnosed what happened to cause the problem.

It is necessary to run Startup Repair 3 times to correct the missing MBR issue. Did you do that already?

Startup Repair

Startup Repair - Run 3 Separate Times

EDIT: And of course, be sure only the SATA drive is connected when running startup repair.
My System SpecsSystem Spec
.


30 Jan 2011   #4

Windows 7 Home Premium 64 bit
 
 

thanks for the reply's. came across a utility called EasyBCD while searching forums. after running it I was able to remove the D drive and boot to 7 with no problems.
My System SpecsSystem Spec
30 Jan 2011   #5

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Congrats.
I hear lots of good things about EasyBCD here. One day I hope to have the opportunity to use it.

Or do I?
My System SpecsSystem Spec
Reply

 Windows 7 won't boot after removing secondary drive




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:41 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33