Sata Mode AHCI / IDE

Hey everyone. I hope everyone is doing fine. I've literally rebuilt my entire machine but I think I made a mistake before installing Windows 7.

I should have gone over the BIOS with a fine tooth comb, but I did not. The SATA mode is set to IDE instead of AHCI or RAID and now of course, I can't switch it to my knowledge without getting a BSOD. It means I would have to reinstall the OS over again.

I have been reading up online and did a search here, but didn't find the appropriate thead. I have two questions. I read on a forum somewhere, where an Intel user used a program to change this in Windows somehow. Is there some kind of utility that will allow me to switch to AHCI mode without reinstalling Win7 64bit?

Second question, is it worth it to switch over? I see the benefits are this:

AHCI mode brings 3 main advantages:
Supports NCQ (Native Command Queuing) allowing SATA drives to accept more than one command at a time and dynamically reorder the commands for maximum efficiency.
Supports hot plugging of devices
Supports staggered spin ups of multiple hard drives at boot time

My machine seems kind of slow when accessing data and don't know if this is an issue with the SATA drives being in IDE mode. I got some choppiness in some games that's coming from access data (tested) and that seems weird but could definitely come from SATA drives being in IDE mode.

I got an MSI R5770 Hawk Video card...I'm freaking in love with that thing :)

I have two Hitachi 7200RPM SATA and one Seagate Barracuda 7200RPM SATA drive. All three are 500GB

My new machine is ASRock M3A770DE Mainboard and I successfully unlocked the 4th core on my AMD Athlon 445 making it a Phenom X4 3.1 and it's running beautifully. Ran a stability test and it was perfect.

RAM is Kingston HyperX CAS8 running at 1600mhz

So my question....to AHCI or not. Do you think its worth it. Have you noticed huge performance gains.

So now I guess I better update my profile and sorry I haven't been around. Me and SevenForums had an email issue

Cheers!

That's weird. I thought Windows 7 handled switching to AHCI mode better than that. Guess it has the same problem as XP.

Anyway, quick answers to a couple of your questions:

1) There is nothing magical about AHCI. About all you will gain is the ability to hot-plug drives. That may be worthwhile if you use an external HDD connected by eSATA. Otherwise, I wouldn't worry about it.

From what I've read, NCQ is only of real benefit in an environment where the disk is being accessed constantly, such as server. Normal desktop users probably won't see any measurable benefit.

The staggered spin-up thing probably doesn't matter either. Maybe it would, if you were running a large RAID (like maybe a 6-disk RAID 10) and had a barely-adequate power supply.

2) Yes, there should be a way to install the AHCI drivers so that Windows 7 doesn't bluescreen on startup. I did it with Windows XP, although it wasn't all that straightforward. I didn't have to reinstall Windows XP, and you shouldn't have to reinstall Windows 7 either.

update:

Just for curiosity, I tried switching my disk controller to IDE mode. Windows 7 booted, but then made me reboot immediately, presumably because it had to install the IDE-mode drivers for the disk controller. On next startup, I re-ran the Windows Experience Index test. My disk score remained exactly the same (5.9) as when I had the disk controller in AHCI mode.

I then restarted, got into the BIOS menu & switched the disk controller back to AHCI mode. On restart, Windows 7 again booted fine.

Hey thanks for the reply. I'll try to see if I can switch and see what happens. I don't think the Windows Index would change unless you replaced the drive with a solid state. 5.9 seems to be the best score you can get with a conventional hard disk.

Thanks for the reply.

It might be informative if I ran a hard drive benchmark utility with the disks in both AHCI mode and IDE mode.

What would be a good testing utility? HD Tach has a trial version that will test for best-case (sequential) read speeds, which should be enough to show any differences between AHCI and IDE performance.

I didn't know mechanical HDD's could only score 5.9 on the Windows index. How about if you have them in a RAID 0 config? RAID 0, or one of its hybrids such as 1+0, can just about double read speeds in many cases.

I'll post results if I do get around to some testing.

Practically no difference, which is about what I expected.

Here you go my Man excellent tutorial for you from our very own Bare Foot Kid

AHCI : Enable in Windows 7 / Vista[2]=Performance%20Maintenance


Steve

I just tried to switch...BSOD. So it's not possible anyway and for no performance gain, it's not even worth it to reinstall the OS.

Thanks for the replies everyone.

It is possible, I have done it before. Just follow the tutorial Steve Pressman gave. But, I don't believe you will see much performance gain unless you have an SSD.

I would recommend AHCI, you might not notice a performance improvement, but NCQ can reduce the HDD activity and disk thrashing.
If you're using eSATA it's nice to be able to remove the external when you want to.
The tutorial listed by steve-pressman does work very well.


@unifex, I switched from IDE to RAID on my Dell Inspiron 530, before the reg edit trick was known. Loaded the RAID drivers and when it asked to re-boot I went to the BIOS and switched it to RAID, after the OS loaded it asked for another re-boot and I was in AHCI mode.

If this doesn't work for you, use the above tutorial.

As long as you have the RAID drivers loaded in the OS it will run in AHCI mode.
When it re-boots by itself does it run fine afterwards?

I never used a PCI-e card, got a SATA cable that went to a backplate with a eSATA plug on it, nothing else just cable.
Works great for over three years now, can hot swap with a nice little program called "HotSwap", it looks and functions just like the MS Safely Remove Hardware option, except it will clear the cache and let you unplug the external.
This method will also let you run an OS from an external, it has no way of knowing it's not internal.

If your SSD is not noticeably faster, there might be something that is holding the performance back. Bad alignment, old drivers, there are several things that could be doing it.