usb reconized but not working


  1. Groen
    Posts : 1
    windows 7 professional 32bit
       New #1

    usb reconized but not working


    I have a 32gb flash drive I formatted it with a program so the file system is NTFS it did say format complete but now I insert the flash drive and it shows up in my computer but no auto play and when I click on it in my computer it stops responding I went to device manager and when I click disks and drives it says working properly but when I click portable devices it says error code 10 I think I am using windows 7 professional
      My Computer
    Quote Quote

  3. Windows Sniper
    Posts : 611
    Windows 8.1
       New #2

    Error code 10 is the driver has stopped responding, If that is the Case have you tried Updating the Dirvers?

    Follow this if you dont know how.

    Start
    Right-click My Computer
    Properties
    The Left Panel Has Device Manager Click on that
    Look For Your Device that is not working(Should Have a Warning Sign)
    Go to the Driver Tab
    Then Click Update Driver.

    Get back to us to see if that resolved it.

    Oh and Welcome to the Forums Groen :)
      My Computer
    Quote Quote

  4. Crispy
    Posts : 1,039
    Windows 7 Ultimate x64 Service Pack 1 (Build 6.1.7601)
       New #3

    Format the USB flash drive using the default windows format tool, AKA right click format.
      My Computer
    Quote Quote

 

  Related Discussions
I have a 32-bit system currently set up, a Sony Vaio VGC-RA820G. My friend recently gave me a Radeon HD 4350 video card to put in it. It has a 3.2GHz Pentium 4 HT and 3GB of RAM. The PSU is 350w which should be more then enough for the 4350 as my friend used it with a 300w on a much more power...
Im trying to install the drivers for the Hauppauge HD PVR Gaming Edition. When i try that with the disc it says device not connected. So it cant install the drivers either. I connected the HD PVR to my PC but it does not recognize it. Im using the original USB Cable that followed with the PVR. When...
CD/DVD not reconized
in Hardware & Devices

My year old build lost the dvd drive. There is not even a dvd header in the device manager any more. The BIOS does not reconized it either.Cannot go back to a restore point either because system can not find point before problem. No disk image can be found.
Usb device not reconized
in Hardware & Devices

Just recently when I plug a camera or my cell phone into my USB slot in the front, my system won't reconize it. Any help on this would be appreciated. Thanks, B-72
new reconized drive
in Hardware & Devices

After my successful OEM/build, I have noticed that I have a new piece of hardware listed in my computer tab. It's a floppy disk drive labeled as (A). I do not have one and the OEM for that matter either. After going back through my mobo manual I found and see in the main menu section 2.3.3 Legacy...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 10:01.
Find Us