Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Error 28

16 Mar 2011   #1
CGOWAddict

Windows 7 Home Premium 64bit
 
 
Error 28

Well I thank you all for all your replys to my problem, everything worked out almost fine.... seems that the coprocessor has a exclamation point. Windows can't find the driver and I'm not having any luck at finding them either. HP website was no help. Without buying any driver finder type software is there a way to find the right drivers.

I have attached a .docx file with screenshots

THX for your help in advance




Attached Files
File Type: docx code 38 error.docx (761.2 KB, 32 views)
My System SpecsSystem Spec
.
16 Mar 2011   #2
Hopalong X

Windows7 Pro 64bit SP-1; Windows XP Pro 32bit
 
 

It is either the Driver-Chipset or the Nvidia Driver Graphics at below link.
Your pictures in your file don't show the entire list.

I'm fairly sure it is the chipset driver.

It should just download and install. Some may say it is an old driver but if it works???

Software & Driver Downloads Compaq Presario F500 CTO Notebook PC - HP Customer Care (United States - English)

If someone else has ideas jump in.
Mike
My System SpecsSystem Spec
16 Mar 2011   #3
CGOWAddict

Windows 7 Home Premium 64bit
 
 
added extra screenshot

I added another screenshot, hope it helps.


Attached Files
File Type: docx code 28 error.docx (920.1 KB, 63 views)
My System SpecsSystem Spec
.

16 Mar 2011   #4
Hopalong X

Windows7 Pro 64bit SP-1; Windows XP Pro 32bit
 
 

Well I'm just not sure. Looked at your Device Manager in new upload. I see Nvidia listings but lost on the co processor. Not what I thought it was.

Will make a request for more help. Get an expert for you I hope.


Mike
My System SpecsSystem Spec
16 Mar 2011   #5
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

Explanation of error codes generated by Device Manager in Windows XP Professional

(Should be the same in Win 7)

The "Error 28" looks like the driver was not installed properly, then the "Error 38" would seem to indicate that the driver reinstall retry and the original driver install both tried to start and got in each others way.

If you're sure you have the right driver(s) downloaded, I would uninstall everything related to the nVidia chipset, reboot, then let Windows have another shot at it.
My System SpecsSystem Spec
17 Mar 2011   #6
CGOWAddict

Windows 7 Home Premium 64bit
 
 

O.K., I went to the compaq website and picked my laptop, since windows 7 was not on the list I chose vista for my OS downloaded and installed the drivers. If you use the path of control panel--> hardware and sound--> Devises and printers, the exclamation point over the picture of the laptop is gone. But also after I updated the drivers the other devices --> coprocessor part and storage controllers are not there anymore. Will this be a problem?

I've attached some screen shots.

THX in advance!


Attached Files
File Type: docx code 28 error update.docx (322.0 KB, 18 views)
My System SpecsSystem Spec
17 Mar 2011   #7
Hopalong X

Windows7 Pro 64bit SP-1; Windows XP Pro 32bit
 
 

Looked at the new file.
Excellent.
You may have had the wrong driver installed or Microsoft installed what it thought was the right one.. So the driver was looking for a co processor that did not exist.
Device Manager recognized a driver installed but no device for it.

Anyway it appears good now.

Mike
My System SpecsSystem Spec
17 Mar 2011   #8
CGOWAddict

Windows 7 Home Premium 64bit
 
 

That's what I was thinking, I installed windows 7 with my update disk and guess the installer messed up on that part. THX for the advice!!
My System SpecsSystem Spec
17 Mar 2011   #9
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

Glad to hear you got it going.
My System SpecsSystem Spec
17 Mar 2011   #10
CGOWAddict

Windows 7 Home Premium 64bit
 
 

Well it does have two processors. Look at the picture again in the updated file.
My System SpecsSystem Spec
Reply

 Error 28




Thread Tools





Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices
BSOD error.. Restarts, but power button stays on, graphics card error?
Hey guys, i want to thank you ahead of time for helping me. This BSOD is a pain in the butt. Intel Pentium 2.8GHZ RAM 3.5 32 bit OS Intel GG965 Express Chipset Family I have already reinstalled the operating system multiple times, i think its a faulty graphics card, but i want to be...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App