Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cooler Master hyper 212 plus?

18 Mar 2011   #1
Un4GiVeN78

MS Windows 7 Ultimate 64-bit
 
 
Cooler Master hyper 212 plus?

Hello, i have AMD phenom II x4 955 BE processor. i have replaced the stock fan because of the huge noise and the bad cooling with a new Cooler Master hyper 212 plus(Hyper 212 Plus - Cooler Master - Leading Provider of Computer Case | Cooler | Power Supply) i noticed that it is a bit better for cooling but the noise is too high.
it is allowed to have 2 fans on both sides, i have only one fan now i bought it that way so if i buy the other fan and plug it in the other side will increase the cooling and lower the noise or make it worse noise?!
thank you


My System SpecsSystem Spec
.
18 Mar 2011   #2
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

Two identical fans is going to make more noise than 1 fan.

You should use a single fan that blows air THROUGH the heatsink fins and TOWARD the rear of the case, where you probably have an exhaust fan.

That heatsink is generally well-regarded for cooling purposes, but I'm not sure about how quiet it is.

You may have just had bad luck and got a noisy example of the fan.

Or that particular fan may just be noisier than you like.

My advice: replace with another fan KNOWN to be quiet: low to medium speed Nexus, Yate Loon, or Scythe, for example.

Make sure you have mounted the heatsink and fan to blow air as I described above.
My System SpecsSystem Spec
18 Mar 2011   #3
chevy350

Win8.1 Pro x64
 
 

If nothing else you can pick up some higher quality fans or fan and replace the one that comes with the cooler. I have 2 mounted to mine now and have them set at 75% and they are barely noticeable.
My System SpecsSystem Spec
.

18 Mar 2011   #4
Un4GiVeN78

MS Windows 7 Ultimate 64-bit
 
 

The FAN on the right side to PUSH the air through the heatsink, I thought another FAN on the left side to PULL the air will be perfect. I run my PC 24 hours and consume high processing rate and all i think about is noise level cause my bed next to the pc and i can't sleep lol. I'm afraid i can't replace this heatsink cause i've been using it for 2 weeks.
besides this heatsind is too way expensive to the processor the seller thought i have X6 CPU or something.
i'm starting to hate the whole AMD because of heat and noise.
My System SpecsSystem Spec
18 Mar 2011   #5
Un4GiVeN78

MS Windows 7 Ultimate 64-bit
 
 

ignatzatsonic did u mean to replace the entire heatsink or just the single fan?! sry i'm confused
My System SpecsSystem Spec
18 Mar 2011   #6
Un4GiVeN78

MS Windows 7 Ultimate 64-bit
 
 

Quote   Quote: Originally Posted by chevy350 View Post
If nothing else you can pick up some higher quality fans or fan and replace the one that comes with the cooler. I have 2 mounted to mine now and have them set at 75% and they are barely noticeable.
I got it.
thank you
My System SpecsSystem Spec
18 Mar 2011   #7
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

I meant change only the fan to a known quiet fan, low or medium speed.

Two fans of a certain type will always be noisier than 1 fan of the same type.

Fans are a tradeoff between noise and cooling power.

If noise is a bigger problem than cooling power, go with 1 good low to medium speed fan that blows THROUGH the fins and TOWARD the rear of the case.

Scythe Slipstream is good.

Nexus

Yate Loon.

Make sure it is fairly low RPM--800 or 1200.

What is the RPM of your current fan?

What brand and model is your current fan?
My System SpecsSystem Spec
18 Mar 2011   #8
Un4GiVeN78

MS Windows 7 Ultimate 64-bit
 
 

Quote   Quote: Originally Posted by ignatzatsonic View Post
I meant change only the fan to a known quiet fan, low or medium speed.

Two fans of a certain type will always be noisier than 1 fan of the same type.

Fans are a tradeoff between noise and cooling power.

If noise is a bigger problem than cooling power, go with 1 good low to medium speed fan that blows THROUGH the fins and TOWARD the rear of the case.

Scythe Slipstream is good.

Nexus

Yate Loon.

Make sure it is fairly low RPM--800 or 1200.

What is the RPM of your current fan?

What brand and model is your current fan?

This picture shows the RPM and the temp.
I use the original FAN that comes with the heatsink


Attached Images
  
My System SpecsSystem Spec
18 Mar 2011   #9
ignatzatsonic

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium SP1, 64-bit
 
 

If you run your PC under load all the time, you may have to live with the noise.

All you can do is experiment with fans. A low speed fan may be very quiet but may not cool enough if the processor is under a good load.

Also consider:

Do you know that the heatsink is properly mounted with good thermal paste? If it is not mounted properly, temps will rise.

Ambient temperature of your room. If you reduce the ambient temp by 5 degrees, the temps inside your PC will drop a similar amount and may let you use a quieter fan.

There is nothing wrong with that heatsink if it is mounted correctly.
My System SpecsSystem Spec
18 Mar 2011   #10
Un4GiVeN78

MS Windows 7 Ultimate 64-bit
 
 

Quote   Quote: Originally Posted by ignatzatsonic View Post
If you run your PC under load all the time, you may have to live with the noise.

All you can do is experiment with fans. A low speed fan may be very quiet but may not cool enough if the processor is under a good load.

Also consider:

Do you know that the heatsink is properly mounted with good thermal paste? If it is not mounted properly, temps will rise.

Ambient temperature of your room. If you reduce the ambient temp by 5 degrees, the temps inside your PC will drop a similar amount and may let you use a quieter fan.

There is nothing wrong with that heatsink if it is mounted correctly.

I took long time to mount the heatsink into my motherboard coz it was really difficult. i'm afraid the thermal paste was not enough cause i kept mount and remove the heatsink few times. it was a MESS
My System SpecsSystem Spec
Reply

 Cooler Master hyper 212 plus?




Thread Tools




Similar help and support threads
Thread Forum
Will the Cooler Master Hyper 212 EVO fit my computer?
So I just built my first computer, and I'm getting a new heatsink (the one that I currently have is super loud and noisy.) I'm not the best at heatsinks, so I'll need some help! I have an AM3+ socket, so this heatsink is compatible. The thing I'm worrying about is will it fit my computer case,...
PC Custom Builds and Overclocking
Cooler Master Hyper 212 EVO isn't cooling well
Greetings ! So,a few months ago I bought a Hyper 212 EVO. When I installed it,everything was great.The temperatures were really good ( when only on desktop / Facebook / Youtube it'd run on 30 įC ),then I decided to do something which turned out to be stupid. I decided to re-apply the thermal paste....
PC Custom Builds and Overclocking
Cooler Masterís HAF X
Well for the second time Iíve come off of my usual name brand company items. First I left Intel to go with Gigabyteís X58A-UD5 motherboard, now Iíve left Antec to go with Cooler Mastersí HAF X PC Case. Quick story, Iíve been using Antec cases since 2000 and recently grew tired of my P182 since...
PC Custom Builds and Overclocking
Cooler Master's new All-in-One Liquid Cooler
Just saw this...... Cooler Master Future Proofs All-in-One Liquid Cooling with Expandable Glacer 240L Discuss
PC Custom Builds and Overclocking
Cooler Master Hyper 212 Plus Cooler
I just got the Cooler Master Hyper 212 Plus Cooler today, easily installed and really good. Well better than stock cooler. Hyper 212 Plus - Cooler Master - Leading Provider of Computer Case | Cooler | Power Supply Cooler Master Hyper 212 plus review The 1 fan which is mounted is intake. ...
Hardware & Devices
Cooler Master Hyper 212 Plus
Hello. I just ordered a new heatsink for my Core 2 Quad Q9550 at stock clocks (2.83GHz), and I was wondering if anybody else had any experience with this heatsink. Any advice would be useful because this will be my first aftermarket heatsink. If you could provide installation tips or stuff like...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App