New
#1
Data recovery on RAID auto rebuild on wrong HDD
Hi guys, need some advice. I have win 7 running on RAID 1 using 2 Seagate 750GB hdds...
My motherboard is an ASUS P5 series with an onboard Intel Raid chip...
So apparently one of the drives went dead and since it's RAID 1 no problem right? Just replace the disk and it will auto rebuild... Problem is, this thing happened just as i was about to step out of my house for a week long vacation... I thought i'd get a new drive when i got back and shutdown the pc to save on power while i was away...
Fast forward a week, so i boot up the computer and the Intel Raid boot sequence shows that i have a degraded drive... No biggie... I thought i'd boot it up first and replace the degraded drive later... What i didn't notice was that Intel Raid controller had designated another one of my existing drives as a spare and marked it for auto rebuild in Windows...
So, upon booting into Windows, Intel Rapid Storage starts rebuilding on the wrong drive... So now i have 1.5TB HDD data that has been wrongly auto rebuilt... I've sinced replaced the degraded drive and the array is back to normal but my data drive is mush... I tried using Active Undelete and it's able to scan the files and recover but the files are corrupted...
Anyone have any suggestions on what software i could use to try to recover the data?