Revo as boot Drive, want to install XP on slave spinner

Hello, Hope I have the right forum here.

I have a OCZ RevoDrive 120Gb I recently installed as boot drive C:, for Win7 64bit and it is running fine.

I want to install WinXP 32bit on my SATA slave drive, but not sure if it is as simple as booting to DVD drive and selecting a partition on my SATA drive and loading it, or because the REVO is now the boot drive if there is more involved.

Any help would be greatly appreciated!

Thanks

Have a read of those tutorials:
Dual Boot Installation with Windows 7 and XP
SATA Drivers - Load in Windows XP Setup on Dual Boot
SATA Drivers - Slipstream into Windows XP CD

Use EasyBCD 2.0 in Win 7 & Win XP.
Download EasyBCD 2.0.2 - NeoSmart Technologies

A bit more reading.
BCDEDIT - How to Use
System Restore Points - Stop XP Dual Boot Delete - Vista Forums

JimmyJazz said:

Hello, Hope I have the right forum here.

I have a OCZ RevoDrive 120Gb I recently installed as boot drive C:, for Win7 64bit and it is running fine.

I want to install WinXP 32bit on my SATA slave drive, but not sure if it is as simple as booting to DVD drive and selecting a partition on my SATA drive and loading it, or because the REVO is now the boot drive if there is more involved.

Any help would be greatly appreciated!

Thanks

That all depends on how you want to install XP.
If you want it where you DUAL boot the OSs, IE have a BOOT menu come up every time you start the PC where you select from a list the OS you want to boot into, then you don't need to remove the REVO card.
But in doing that the X"P install will copy files to the REVO card as it is set as the First BOOT device.
I personally don't care for true DUAL BOOT systems. For me I have 3 OS, 7, XP and a Linux. I keep 7 and XP on 2 completely different hard drives that i switch in and out of the system depending on which one I want to boot. Linux in on a thumb drive.
There was talk over in your other thread about using the F8 function key at boot up to select which drive to boot to and if that works that is the way I would go. I personally haven't tried that as I would rather keep my OSs apart from one another.

In your case since the SSD drive is really a add-on PCI-e card it's going to be a pain to remove it to boot into some other OS. So you have two options Dual boot them or remove the card for the time it takes you to install XP and setup the programs you want to use with XP. Then reinstall the SSD card and use the one time boot menu F8 key. But then these two OS will see each other and create Recycler and $Recycle.bin folders on both OS drives.

Thank-you for the links theog.

Shootist, thanks for all your help in the other thread. I posted this here thinking it was a hardware issue, before asking about it in my thread from last week.

Mods may delete this thread if they see fit, as it turns out it was not a hardware issue. Sorry about that!

You are welcome.