Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: HP Pavillion a6000


28 Apr 2011   #21

 

I am now uploading a video on youtube.... for more resource... Thank you all for taking your time to help me out!

My System SpecsSystem Spec
.

28 Apr 2011   #22

 

My System SpecsSystem Spec
29 Apr 2011   #23

Windows 7 Ultimate x86
 
 

It sure is odd.
What do you mean with "I can hear the Processor working" ?
Anyhow...to me it looks like the computer hasn't been turned on yet...you'll get a short power burst until the ATX power supply notice the computer is turned off and cuts the power.
So I still stand by my first assumption: a defective/malfunctioning power switch.
Or can you actually open the DVD drive after the fans have stopped ?

On a different note : You shouldn't pull the plug off the mainboard just by the cable strands. there is a little "lock thingy" on the plug you should press to release the cable.

-DG
My System SpecsSystem Spec
.


29 Apr 2011   #24

 

When the fans stop spinning... i can hear the processor working. as in i still can hear the computer on when the fans stop spinning. No, i do not get a video display. I did connect the DVD drive to the power and was able to open/close the tray.
My System SpecsSystem Spec
30 Apr 2011   #25

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Try changing the Video card.
My System SpecsSystem Spec
02 May 2011   #26

 

Adding? the video card on the computer is onboard...
My System SpecsSystem Spec
02 May 2011   #27

 

i ordered a 20 pin to 24 pin PSU connector from ebay. i have three power supplys at home that can be swapped out and used to see if it's the actual PSU that is defective... either way. Why does the computer power on when plugging in the power chord... and wont turn off...
My System SpecsSystem Spec
02 May 2011   #28
Microsoft MVP

Windows 7 Ultimate 32bit SP1
 
 

This may be a silly question ... is the monitor securely plugged in? On my XP, the monitor has a way of losing it's connection if I move it, even slightly.
My System SpecsSystem Spec
02 May 2011   #29

 

The monitor is plugged in, when the machine powers on. the monitor does also however no video output is shown. To verify that the monitor was correctly working... while the computer was "on" I disconnected the monitor from the back of the computer and "video source is not founf" on the monitor appears so yes. the monitor is plugged in. No such thing as a silly question ...

It's time to come up with a solution. when i get the converter that i orderes for the PSU... to test the spare ones i have lying around. Whats the next thing i should be looking at? ... this is really frustrating.
My System SpecsSystem Spec
02 May 2011   #30

windows 7 ultimate 64 bit
 
 

Did you check the settings on the monitor as the tint or contrast turned all the way?
My System SpecsSystem Spec
Reply

 HP Pavillion a6000




Thread Tools



Similar help and support threads for2: HP Pavillion a6000
Thread Forum
Wireless Issue w/my HP Pavillion G4 Network & Sharing
BSODs on HP Pavillion BSOD Help and Support
HP Pavillion DV9000 Drivers
BSODs on HP Pavillion BSOD Help and Support
HP Pavillion DV4 problems Performance & Maintenance
Wireless Issue with Pavillion DV4 Network & Sharing
Any successes on hp pavillion notebook? General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:06 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33