Windows 7 Forums


Windows 7: HP Pavillion a6000

03 May 2011   #31

ME/XP/Vista/Win7
uk Hampshire
 
 

Quote   Quote: Originally Posted by Nano3 View Post
Adding? the video card on the computer is onboard...
1) Remove cards from slits 1 & 2, than reboot.



2) Add Video card at slit 3, than reboot.

HP Pavillion a6000-capturehprepair.jpg

Post back.
My System SpecsSystem Spec

03 May 2011   #32

7
Chicago IL / Springfield MA
 
 

PROGRESS!

I removed the cards off the motherboard, i then inserted the power chord into the power supply and the computer booted up as it has booted before but only this time... The fans stood on! so i held onto the power button and the machine still would not turn off... the fans however still where spinning.

I then unplugged the power chord from the power supply and the computer turned off. I then removed both sticks of RAM off the board and a LONG BEEP! occurs as well as my previous experience. (computer fans staying on)

Regardless. the computer is not turning off by holding down the power button... still no video display.
My System SpecsSystem Spec
04 May 2011   #33

ME/XP/Vista/Win7
uk Hampshire
 
 

1) No blanking plate,
2) Vodeo card has been removed.
3) Return Vodeo card to slot.Boot up.

HP Pavillion a6000-capturehprepair2.png
My System SpecsSystem Spec
.


04 May 2011   #34

7
Chicago IL / Springfield MA
 
 

I don't think the computer had a video card that came with it. I do see the blanking plate missing but i don't remember there being a video card there... i do not have a video card that can fit that slot but i have one for the other slots. I just disconnected every card from the motherboard... including the HDD and RAM. the computer beeps and does the same thing.

Plug in the power chord to the back of the PSU

Fans turn on
no video output
hold down power button but the PC doesn't turn off
My System SpecsSystem Spec
05 May 2011   #35

7
Chicago IL / Springfield MA
 
 

bump ...
My System SpecsSystem Spec
05 May 2011   #36

windows 7 ultimate 64 bit
 
 

Try a different keyboard....
My System SpecsSystem Spec
06 May 2011   #37

7
Chicago IL / Springfield MA
 
 

I never had a keyboard or mouse plugged in during any of the troubleshooting. im at work now but will try once i get home... Could it be a PSU issue? i am ordering a new one today.

Will update when i get home. thank you all for helping me figure out whats going on.
My System SpecsSystem Spec
06 May 2011   #38

windows 7 ultimate 64 bit
 
 

Some motherboards will not boot w/out keyboard and it could also be a PSU....
My System SpecsSystem Spec
06 May 2011   #39

Windows 7 Ultimate x86
Massachusetts
 
 

Quote   Quote: Originally Posted by Ivan the SoSo View Post
Some motherboards will not boot w/out keyboard and it could also be a PSU....
Right that's when you get the retarded message"Keyboard not detected...Press F1 to continue
But that can be changed in BIOS: "halt on all errors but keyboard"
My System SpecsSystem Spec
06 May 2011   #40

7
Chicago IL / Springfield MA
 
 

Still the same results... only this time, it changes from the fans staying spinning... to the fans not spinning.

Does everyone get whats going on here? am i making any sense? should i close this thread and start all over?
My System SpecsSystem Spec
Reply

 HP Pavillion a6000 problems?



Thread Tools



Similar help and support threads for: HP Pavillion a6000
Thread Forum
BSODs on HP Pavillion BSOD Help and Support
HP Pavillion DV9000 Drivers
BSODs on HP Pavillion BSOD Help and Support
HP Pavillion DV4 problems Performance & Maintenance
Wireless Issue with Pavillion DV4 Network & Sharing


All times are GMT -5. The time now is 11:54 PM.


Seven Forums Android App Seven Forums IOS App Follow us on Facebook

Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32